John Deere STX30 Specifications - John Deere STX30 Specs

info
Series: → STX38
Production
Manufacturer: John Deere
Type: Lawn tractor
Factory: Horicon, Wisconsin, USA
The STX30 was the smallest lawn tractor in the John Deere line during its production. Front headlights lights were available as a kit (AM107293).
John Deere STX30 Engine
Fuel tank: 1.25 gal 4.7 L
Mechanical
Chassis: 4x2 2WD
Steering: manual sector-and-pinion
Brakes: integral mechanical disc
Cab: Open operator station with foam-padded seat.
Power Take-off (PTO)
Mid PTO: independent
Clutch: electric
Dimensions & Tires
Wheelbase: 44.69 inches 113 cm
Weight: 417 lbs 189 kg
Front tire: 13x5-6
Rear tire: 18x6.5-8
STX30 Serial Numbers
1989: 595001
1990: 010001
1991: 100001
1992: 135001
1993: 160000
Final: 210000
STX30 Serial Location
Serial number decal on the rear of the tractor, behind the left wheel.
Electrical
Ground: negative
Charging system: flywheel alternator
Charging amps: 15
Battery CCA: 200
Battery volts: 12
info
Series: → STX38
Engine Detail
Kohler CF12.5-1216S, gasoline, 1-cylinder, air-cooled
Displacement: 398 cc 24.3 ci
Bore/Stroke: 3.425x2.638 inches 87 x 67 mm
Power: 9 hp 6.7 kW
Air cleaner: paper and foam
Compression: 8.9:1
Rated RPM: 3350
Starter volts: 12
Oil capacity: 2 qts 1.9 L
John Deere STX30 Engine
Image courtesy of Matthew Marchand
info
Series: → STX38
Transmission
Transmission: Peerless 920
Type: belt-driven gear
Gears: 5 forward and 1 reverse
Oil change: sealed unit, service not recommended
info
Series: → STX38
John Deere STX30 Tires
Lawn/turf front: 13x5-6
Lawn/turf rear: 18x6.5-8
Dimensions
Wheelbase: 44.69 inches 113 cm
Length: 60 inches 152 cm
Width: 43.5 inches 110 cm
Height (steering wheel): 38.6 inches 98 cm
Weight: 417 lbs 189 kg
info
Series: → STX38
Attachment overview
30" mid-mount mower deck, Snowblower, A twin-bag 6.5-bushel rear grass bagger (BM16868) was optional. If the tractor was operating on hills with the bagger then 35-pound wheel weights were recommended. Rear-tire chains and a rear suitcase-style weight bracket were available for use with the snowblower.