John Deere 332 Specifications - John Deere 332 Specs

info
330 ↑
Series: 332
Production
Manufacturer: John Deere
Type: Garden tractor
Factory: Horicon, Wisconsin, USA
The John Deere 332 has been referred to as the "diesel 318" due to the 332's similarity to the popular gasoline-powered model. The 332 used the same engine as the model 330 it replaced, but added several features including power steering, dual hydraulics, and individual left/right brakes.
Variants
318: air-cooled gas
322: liquid-cooled gas
332: diesel
Mechanical
Chassis: 4x2 2WD
Steering: hydrostatic power
Brakes: differential mechanical
Cab: Open operator station
Transmission: hydrostatic
Capacity
Fuel: 4.5 gal 17.0 L
Hydraulic system: 1.25 gal 4.7 L
Hydraulics
Capacity: 1.25 gal 4.7 L
Valves: 2
Tractor hitch
Rear Type: 0 (optional)
Control: non-position control
Rear lift (at 24"/610mm): 640 lbs 290 kg
Power Take-off (PTO)
Rear PTO: independent (optional)
Clutch: electric
Rear RPM: 2000
Front PTO: independent
Front RPM: 3600
Dimensions & Tires
Wheelbase: 46 inches 116 cm
Weight: 900 lbs 408 kg
Front tire: 16x6.50-8
Rear tire: 23x10.5-12
Electrical
Ground: negative
Charging system: alternator
Charging amps: 20
Battery
Number: 1
Cold-cranking amps: 342
Volts: 12
Group: U1
info
330 ↑
Series: 332
Engine Detail
Yanmar 3TN66UJ, diesel, 3-cylinder, liquid-cooled
Displacement: 658 cc 40.2 ci
Bore/Stroke: 2.60x2.62 inches 66 x 67 mm
Power: 16 hp 11.9 kW
Fuel system: indirect injection
Air cleaner: dry
Compression: 22.4:1
Rated RPM: 3635
Starter volts: 12
Oil capacity: 3.1 qts 2.9 L
Coolant capacity: 3.0 qts 2.8 L
info
330 ↑
Series: 332
Transmission
Transmission: Sundstrand Series 15 Model 90
Type: shaft-driven hydrostatic
Gears: infinite forward and reverse
Oil capacity: 6.5 qts 6.2 L
info
330 ↑
Series: 332
John Deere 332 Tires
Lawn/turf front: 16x6.50-8
Lawn/turf rear: 23x10.5-12
Dimensions
Wheelbase: 46 inches 116 cm
Length: 69.5 inches 176 cm
Width: 43.3 inches 109 cm
Height: 44.5 inches 113 cm
Shipping: 900 lbs 408 kg
Front tread: 32 inches 81 cm
Rear tread: 30.5/32.8 inches 77/83 cm
info
330 ↑
Series: 332
Attachment overview
38" mid-mount mower deck, 46" mid-mount mower deck, 50" mid-mount mower deck, Snowblower, Blade, Two tillers were available for the 332, a 48-inch shaft drive and a 30-inch hydraulic tiller (optional extension to 42 inch). The shaft-drive tiller required the optional 2000 RPM rear PTO. The hydraulic tiller operated off a separate hydraulic pump that was belt-driven in place of the mower deck.
38" Mower deck
Type: mid-mount John Deere, 2-blade with hydraulic lift
Cutting width: 38 inches 96 cm
Weight: 100 lbs 45 kg
Overall width: 49.7 inches 126 cm
Cut height: 1 to 4 inch 2 to 10 cm
46" Mower deck
Type: mid-mount John Deere, 3-blade with hydraulic lift
Cutting width: 46 inches 116 cm
Weight: 116 lbs 52 kg
Overall width: 57 inches 144 cm
Cut height: 1.5 to 5 inch 3 to 12 cm
50" Mower deck
Type: mid-mount John Deere, 3-blade with hydraulic lift
Cutting width: 50 inches 127 cm
Weight: 186 lbs 84 kg
Overall width: 68 inches 172 cm
Cut height: 1.5 to 4 inch 3 to 10 cm
Blade
Type: front-mount John Deere 0611M
Width: 54 inches 137 cm
Height: 18 inches 45 cm
Lift height: 12 inches 30 cm
Cut depth: 3.5 inches 8 cm
Lift: hydraulic
Angle: manual, hydraulic*Optional
46" Snow blower
Type: front-mount John Deere 49 0603M, single-stage with hydraulic lift
Clearing width: 46 inches 116 cm
Weight: 200 lbs 90 kg
47" Snow blower
Type: front-mount John Deere 47 2752M, dual-stage with hydraulic lift
Clearing width: 47 inches 119 cm
Clearing height: 23 inches 58 cm
Weight: 400 lbs 181 kg