FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
317 ↑ | |
Series: | 318 |
Production | |
Manufacturer: | John Deere |
Type: | Garden tractor |
Factory: | Horicon, Wisconsin, USA |
Original price: | $5,650 (1989 ) |
Variants | |
318: | air-cooled gas |
322: | liquid-cooled gas |
332: | diesel |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | power |
Brakes: | differential mechanical drum |
Cab: | Open operator station. |
Capacity | |
Fuel: | 4.5 gal 17.0 L |
Hydraulic system: | 1.2 gal 4.5 L |
Hydraulics | |
Capacity: | 1.2 gal 4.5 L |
Valves: | 2 |
Tractor hitch | |
Rear Type: | 0 OptOptional |
Control: | non-position control |
Rear lift (at 24"/610mm): | 640 lbs 290 kg |
Power Take-off (PTO) | |
Rear PTO: | independent OptOptional |
Clutch: | electric |
Rear RPM: | 2000 |
Front PTO: | independent |
Front RPM: | 3600 |
Dimensions & Tires | |
Wheelbase: | 46 inches 116 cm |
Weight: | 780 to 836 pounds |
Front tire: | 16x6.50-8 |
Rear tire: | 23x10.50-12 |
318 Serial Numbers | |
1983: | M00318X222001 |
1984: | M00318X285001 |
1985: | M00318X315001 |
1986: | M00318X360001 |
1987: | M00318X420001 |
1988: | M00318X475001 |
1989: | M00318X595001 |
1990: | M00318X010001 |
1991: | M00318X100001 |
1992: | M00318X110001 |
Final: | M00318X120000 |
318 Serial Location | |
Plate below steering column |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 20 |
Battery CCA: | 255 |
Battery volts: | 12 |
info | |
317 ↑ | |
Series: | 318 |
Engines overview | |
18HP Onan 709cc 2-cyl gasoline, 18HP Onan 781cc 2-cyl gasoline |
Engine Detail | |
Onan P218, gasoline, 2-cylinder, air-cooled horizontal-shaft opposed twin, The Onan P218 was used in the John Deere 318 from 1987, beginning at serial number M00318X420001, through the end of production. | |
Displacement: | 781 cc 47.7 ci |
Bore/Stroke: | 3.25x2.88 inches 83 x 73 mm |
Power (gross): | 18 hp 13.4 kW |
Rated RPM: | 3600 |
Starter volts: | 12 |
Sparkplug: | NGK BPR5EFS, Champion RS14YC |
Engine Oil | |
Oil capacity: | 1.75 qts 1.7 L |
info | |
317 ↑ | |
Series: | 318 |
Transmission | |
Transmission: | Sundstrand Series 15 Model 90 |
Type: | shaft-driven hydrostatic |
Gears: | infinite forward and reverse |
Oil capacity: | 5 qts 4.7 L |
Sundstrand Series 15 hydrostatic unit mated to a Peerless differential. |
318 Transmission Controls | |
1: | Motion control |
2: | Brakes |
3: | Throttle |
info | |
317 ↑ | |
Series: | 318 |
John Deere 318 Tires | |
Ag front: | 4.80x4.00-8 |
Ag rear: | 23x10.50 |
Lawn/turf front: | 16x6.50-8 |
Lawn/turf rear: | 23x10.50-12 |
Dimensions | |
Wheelbase: | 46 inches 116 cm |
Length: | 68.5 inches 173 cm |
Width: | 44 inches 111 cm |
Height: | 44 inches 111 cm |
Weight: | 836 lbs 379 kg |
Shiping weight: | 780 lbs 353 kg |
info | |
317 ↑ | |
Series: | 318 |
Attachment overview | |
38" mid-mount mower deck, 46" mid-mount mower deck, 50" mid-mount mower deck, Snowblower, Blade, Front-end loader, Two tillers were available for the 318, a 48-inch shaft drive and a 30-inch hydraulic tiller (optional extension to 42 inch). The shaft-drive tiller required the optional 2000 RPM rear PTO. The hydraulic tiller operated off a separate hydraulic pump that was belt-driven in place of the mower deck. A rear-mounted finish mower was available for the 318, if equipped with three-point hitch and 2000 RPM rear PTO. Three baggers were available. A two-bag (6.5 bushel) Power Flow system had a fan that was belt-driven from the right-hand mower spindle. A three-bag (10 bushel) system had an auxiliary 6-horsepower Kawasaki engine to run the blower. A 13-bushel material collection system used an auxiliary 6-horsepower Kawasaki engine and was available with manual tilt dump or a hydraulic dump connected to a rear hydraulic outlet; it could dump 370 pounds at a height of 66 inches. |
John Deere 44 Loader | |
Loader weight: | 500 lbs 226 kg |
Height (to pin): | 71.5 inches 181 cm |
Clearance, dumped bucket: | 21 inches 53 cm |
Dump angle: | 50° |
Reach at ground: | 44 inches 111 cm |
Rollback angle: | 20° |
Breakout force (bucket): | 575 lbs 260 kg |
Lift to full height (at pin): | 400 lbs 181 kg |
Bucket capacity: | 0.21 cu yd 0.2 cu m, 0.24 cu yd 0.2 cu m |
Bucket width: | 48 inches 121 cm, 54 inches 137 cm |