FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1996 - 2001 9000 Series, Model years 1996-20002001-2001, Four-wheel Drive (4WD) tractor | |
Series next: | John Deere 9300 |
Series back: | John Deere 9100 |
Production | |
Manufacturer: | John Deere |
Factory: | Waterloo, Iowa, USA |
Capacity | |
Fuel: | 270 gal [1022.0 L] |
Hydraulic system: | 26 gal [98.4 L] |
3-Point Hitch | |
Rear Type: | III |
Rear lift: | 13,871 lbs [6291 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 1000 (optional) |
Dimensions & Tires | |
Wheelbase: | 137.8 inches [350 cm] |
Weight: | 31,015 lbs [14068 kg] |
Front tire: | 20.8R42 |
Rear tire: | 20.8R42 |
9200 Serial Numbers | |
Location: | Top left of tractor hinge |
John Deere 9200 Power | |
Engine: | 310 hp [231.2 kW] |
PTO (claimed): | 260 hp [193.9 kW] |
Drawbar (tested): | 246.46 hp [183.8 kW] |
PTO (tested): | 296.92 hp [221.4 kW] |
Mechanical | |
Chassis: | 4x4 articulated 4WD |
Steering: | hydrostatic power |
Brakes: | hydraulic wet disc |
Cab: | Cab standard. |
Hydraulics | |
Type: | closed center PFC |
Capacity: | 26 gal [98.4 L] |
Pressure: | 2900 psi [200.0 bar] |
Valves: | 3 to 5 |
Pump flow: | 35 gpm [132.5 lpm] |
Total flow: | 44 gpm [166.5 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 140 |
Battery | |
Number: | 3 |
Cold-cranking amps: | 925 |
Volts: | 12 |
info | |
Bore/Stroke: | 5.00x5.43 inches [127 x 138 mm] |
Power: | 310 hp [231.2 kW] |
Compression: | 16:1 |
Rated RPM: | 2100 |
Oil capacity: | 44 qts [41.6 L] |
Coolant capacity: | 56 qts [53.0 L] |
Engine Detail | |
John Deere, turbocharged aftercooled diesel, 6-cylinder, liquid-cooled inline, 643 ci [10.5 L] |
info | |
Speeds: | With 20.8R42 tires. |
Transmission | |
Transmission: | John Deere Syncro |
Type: | partially synchronized |
Gears: | 12 forward and 3 reverse |
Oil capacity: | 147.2 qts [139.3 L] (100mm axle), 151.6 qts [143.5 L] (110mm axle), 151.2 qts [143.1 L] (PTO 100mm axle), 155.6 qts [147.3 L] (PTO 110mm axle) |
Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range. |
info | |
Series next: | John Deere 9300 |
Series back: | John Deere 9100 |
Dimensions | |
Weight (shipping): | 31,015 lbs [14068 kg] |
Wheelbase: | 137.8 inches [350 cm] |
Length: | 274 inches [695 cm] |
Width: | 158 inches [401 cm] (duals) |
Height (cab): | 137.5 inches [349 cm] |
Ground clearance: | 28.8 inches [73 cm] (axles) |
Front axle: | 3.94 by 120 inches [100x3048 mm] 4.31 by 120 inches [109x3048 mm] |
Rear axle: | 3.94 by 120 inches [100x3048 mm] 4.31 by 120 inches [109x3048 mm] |
John Deere 9200 Tires | |
Ag front: | 20.8R42 |
Ag rear: | 20.8R42 |