John Deere 8260R Specifications - John Deere 8260R Specs

info
For the 2012 model year the three-point hitch lift capacity was increased by several hundred pounds on the John Deere 8260R
Production
Manufacturer: John Deere
Factory: Waterloo, Iowa, USA
Original price (USD): $197,133 (2011)
Capacity
Fuel: 183.6 gal [694.9 L]
3-Point Hitch
Rear Type: 3/3N, 4N/3
Rear lift (at 24"/610mm): 13,300 lbs [6032 kg] (3/3N 2011), 17,300 lbs [7847 kg] (3/3N 2011), 18,300 lbs [8300 kg] (4N/3 2011), 13,600 lbs [6168 kg] (3/3N 2012), 17,600 lbs [7983 kg] (3/3N 2012), 18,700 lbs [8482 kg] (4N/3 2012)
Front Hitch: 3N/2 (optional)
Front lift (at ends): 8,800 lbs [3991 kg], 11,450 lbs [5193 kg], 12,300 lbs [5579 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 1000 (1-3/4), 1000 (1-3/8 optional), 540 (1-3/8 optional)
Dimensions & Tires
Wheelbase: 120.1 inches [305 cm] (1300 MFWD), 118.9 inches [302 cm] (1500/ILS)
Weight: 27218 to 30252 pounds
Front tire: 420/90R30
Rear tire: 480/80R46
8260R Serial Numbers
- Serial numbers unknown -
John Deere 8260R Power
Engine (gross): 260 hp [193.9 kW]
Engine (max): 286 hp [213.3 kW]
PTO (claimed): 216 hp [161.1 kW]
Drawbar (tested): 202.71 hp [151.2 kW]
PTO (tested): 262.76 hp [195.9 kW]
Mechanical
Chassis: 4x4 MFWD 4WD
Differential lock: hydraulic rear lock, front lock on 1500 and ILS front axles
Steering: hydrostatic power, ActiveCommand Steering (ACS) optional
Brakes: differential hydraulic wet disc
Trailer brakes: hydraulic and air optional
Cab: CommandView II cab standard with heat and air-conditioning.
Hydraulics
Type: closed center pressure-flow compensated
Pressure: 2900 psi [200.0 bar]
Rear valves: 3 to 5
Pump flow: 35 gpm [132.5 lpm]
Total flow: 44 gpm [166.5 lpm], 60 gpm [227.1 lpm] (optional)
Electrical
Ground: negative
Charging system: alternator
Charging amps: 200
Battery
Number: 2
Cold-cranking amps: 925
Volts: 12
info
Bore/Stroke: 4.66x5.35 inches [118 x 136 mm]
Emissions: Interim Tier IV, Stage IIIB
Emission control: exhaust gas recirculation (EGR)
Rated Power (EC 97/98): 260 hp [193.9 kW]
Maximum Power (EC 97/68): 286 hp [213.3 kW], 306 hp [228.2 kW] (IPM)
Air cleaner: dual stage
Pre-heating: ether (optional), block heater (optional)
Compression: 16:1
Rated RPM: 2100
Starter: electric
Starter volts: 12
Oil capacity: 26.4 qts [25.0 L] (1300 axle), 29.5 qts [27.9 L] (1500/ILS axle)
Oil change: 250 h, 500 h (JD Plus-50 II oil)
Coolant capacity: 43.3 qts [41.0 L]
Engine Detail
Optional Intelligent Power Management (IPM) provides a 35HP increase at rated speed., John Deere PowerTech PSX, dual turbochargers diesel, 6-cylinder 24-valve, liquid-cooled inline, 548 ci [9.0 L]
info
Speeds: With Group 47 rear tires. Speed R3 is at 2300 RPM and R4 is at 1500 RPM.
Transmission
Transmission: John Deere Automatic PowerShift
Type: full power shift
Gears: 16 forward and 4 reverse
Automatic PowerShift uses computer control to shift based on load up to the highest selected gear. Fifth reverse is optional through dealer re-programming.
info
Previous model: John Deere 8245R
Next model: John Deere 8270R
Series next: John Deere 8285R
Series back: John Deere 8235R
Dimensions
Weight (operating): 27,218 lbs [12346 kg], 30,252 lbs [13722 kg] (ILS)
Weight (max capacity): 39,683 lbs [18000 kg]
Front axle load: 17,637 lbs [8000 kg]
Rear axle load: 25,353 lbs [11500 kg]
Wheelbase: 120.1 inches [305 cm] (1300 MFWD), 118.9 inches [302 cm] (1500/ILS)
Length: 243.9 inches [619 cm], 258.3 inches [656 cm] (with front weights)
Width: 96 inches [243 cm] (axle), 118.5 inches [300 cm] (long axle), 137.3 inches [348 cm] (clearance lamps), 175.1 inches [444 cm] (extra-long lamps)
Height (cab): 96 inches [243 cm]
Clearance (front axle): 24.3 inches [61 cm] (1300), 23.5 inches [59 cm] (1500), 20.1 inches [51 cm] (ILS)
Clearance (rear axle): 24.9 inches [63 cm]
Clearance (drawbar): 12.6 inches [32 cm]
John Deere 8260R Tires
Ag front: 420/90R30
Ag rear: 480/80R46
info
Previous model: John Deere 8245R
Next model: John Deere 8270R
Series next: John Deere 8285R
Series back: John Deere 8235R
Loader
Loader type: John Deere 843