FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2006 - 2009 8030 Series, Row-Crop tractor | |
| Previous model: | John Deere 8120 |
| Next model: | John Deere 8225R |
| Series next: | John Deere 8230 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Waterloo, Iowa, USA |
| Capacity | |
| Fuel: | 180 gal [681.3 L] |
| Hydraulic system: | 9.5 gal [36.0 L], 14.5 gal [54.9 L] (with aux reservoir) |
| 3-Point Hitch | |
| Rear Type: | III/IIIN, IVN/III (optional) |
| Rear lift (at 24"/610mm): | 12400 lbs [5624 kg], 15200 lbs [6894 kg] (optional), 17300 lbs [7847 kg] (optional) |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 1000, 540/1000 (optional) |
| Engine RPM: | 540@1817 1000@2000 |
| Dimensions & Tires | |
| Wheelbase: | 118.9 inches [302 cm] (ILS), 120.1 inches [305 cm] (MFWD), 126.8 inches [322 cm] (2WD) |
| Weight: | 21774 to 25147 pounds |
| Front tire: | 11.00-24 |
| Rear tire: | 480/80R46 |
| John Deere 8130 Power | |
| Engine (gross): | 225 hp [167.8 kW] |
| Engine (max): | 240 hp [179.0 kW] |
| PTO (claimed): | 180 hp [134.2 kW] |
| Drawbar (tested): | 158.05 hp [117.9 kW] |
| PTO (tested): | 208.27 hp [155.3 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD, 4x4 Independent Link Suspension (ILS) MFWD 4WD |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | CommandView cab standard. |
| Hydraulics | |
| Type: | closed center PFC |
| Capacity: | 9.5 gal [36.0 L], 14.5 gal [54.9 L] (with aux reservoir) |
| Pressure: | 2098 psi [144.7 bar] |
| Valves: | 3 to 5 |
| Pump flow: | 31.7 gpm [120.0 lpm] |
| Total flow: | 44 gpm [166.5 lpm], 60 gpm [227.1 lpm] (optional) |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 200 |
| Battery | |
| Number: | 2 |
| Cold-cranking amps: | 925 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.661x5.354 inches [118 x 136 mm] |
| Rated Power (EC 97/98): | 225 hp [167.8 kW] |
| Maximum Power (EC 97/68): | 240 hp [179.0 kW] |
| Air cleaner: | dual paper elements |
| Compression: | 16.3:1 |
| Rated RPM: | 2100 |
| Idle RPM: | 900-2200 |
| Operating RPM: | 1500-2100 |
| Starter volts: | 12 |
| Oil capacity: | 25.5 qts [24.1 L], 26 qts [24.6 L] (ILS) |
| Coolant capacity: | 42.3 qts [40.0 L] |
| Engine Detail | |
| John Deere PowerTech, variable geometry turbocharged diesel, 6-cylinder 24-valve, liquid-cooled inline, 548 ci [9.0 L] |
| info | |
| Previous model: | John Deere 8120 |
| Next model: | John Deere 8225R |
| Series next: | John Deere 8230 |
| Transmission | |
| Transmission: | John Deere PowerShift |
| Type: | full power shift |
| Gears: | 16 forward and 4 reverse |
| Clutch: | hydraulic wet disc |
| Oil capacity: | 160 qts [151.4 L], 168 qts [159.0 L] (ILS) |
| Full power shift transmission operated with right-hand control lever. Transmission defaults to gear 7-forward and 2-reverse on startup, although this may be re-programmed. Automatic PowerShift (APS) enables automatic shifting to maintain engine load. | |
| info | |
| Previous model: | John Deere 8120 |
| Next model: | John Deere 8225R |
| Series next: | John Deere 8230 |
| Dimensions | |
| Weight: | 21774 lbs [9876 kg] (2WD), 25147 lbs [11406 kg] (ILS 4WD) |
| Wheelbase: | 118.9 inches [302 cm] (ILS), 120.1 inches [305 cm] (MFWD), 126.8 inches [322 cm] (2WD) |
| Length: | 219.1 inches [556 cm] |
| Height: | 122.9 inches [312 cm] |
| Ground clearance: | 17.4 inches [44 cm] |
| John Deere 8130 Tires | |
| Ag front: | 11.00-24 (2WD), 420/90R30 (4WD) |
| Ag rear: | 480/80R46 |