FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1995 - 1999 8000/8000T Series, Model years 1995-19961997-1999, Row-Crop tractor | |
| Previous model: | John Deere 4560 |
| Next model: | John Deere 8110 |
| Series next: | John Deere 8200 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Waterloo, Iowa, USA |
| Capacity | |
| Fuel: | 135 gal [511.0 L] |
| Hydraulic system: | 37 gal [140.0 L] |
| Front hubs: | 3.2 qts [3.0 L] (each) |
| Front diff.: | 11.5 qts [10.9 L] |
| 3-Point Hitch | |
| Rear Type: | 3/3N |
| Control: | electro-hydraulic draft sensing |
| Rear lift: | 10,400 lbs [4717 kg], 14,165 lbs [6425 kg] (optional) |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 1000 (1.75), 540/1000 (1.375 optional) |
| Dimensions & Tires | |
| 2WD Wheelbase: | 122.8 inches [311 cm] |
| 4WD Wheelbase: | 116.1 inches [294 cm] |
| Weight: | 16435 to 18914 pounds |
| Front tire: | 11.00-24 |
| 2WD Rear tire: | 18.4R46 |
| 8100 Serial Numbers | |
| Location: | Serial number plate on the rear of the tractor, above the PTO shaft. |
| John Deere 8100 Power | |
| PTO (claimed): | 160 hp [119.3 kW] |
| Drawbar (tested): | 141.81 hp [105.7 kW] |
| PTO (tested): | 179.15 hp [133.6 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Final drives: | inboard planetary |
| Differential lock: | electro-hydraulic |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet disc |
| Cab: | CommandView Cab standard. Row-Trak guidance optional. |
| Hydraulics | |
| Type: | closed center pressure-flow compensated (PFC) |
| Capacity: | 37 gal [140.0 L] |
| Pressure: | 2900 psi [200.0 bar] |
| Valves: | 3 to 5 |
| SCV flow: | 30 gpm [113.6 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 140 |
| Battery | |
| Number: | 2 |
| Cold-cranking amps: | 925 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.5625x4.75 inches [116 x 121 mm] |
| Air cleaner: | dual paper elements with aspirator |
| Compression: | 15.1:1 |
| Rated RPM: | 2200 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 22.7 qts [21.5 L] |
| Coolant capacity: | 28.8 qts [27.3 L] |
| Engine Detail | |
| John Deere, turbocharged diesel, 6-cylinder, liquid-cooled, 466 ci [7.6 L] |
| info | |
| Previous model: | John Deere 4560 |
| Next model: | John Deere 8110 |
| Series next: | John Deere 8200 |
| Transmission | |
| Transmission: | John Deere PowerShift |
| Type: | full power shift |
| Gears: | 16 forward and 4 reverse |
| Clutch: | hydraulic wet disc |
| Oil capacity: | 148 qts [140.1 L] |
| info | |
| Previous model: | John Deere 4560 |
| Next model: | John Deere 8110 |
| Series next: | John Deere 8200 |
| Dimensions | |
| 2WD Weight (shipping): | 16435 lbs [7454 kg] |
| 4WD Weight (shipping): | 17876 lbs [8108 kg] |
| Weight (operating): | 18,914 lbs [8579 kg] |
| 2WD Wheelbase: | 122.8 inches [311 cm] |
| 4WD Wheelbase: | 116.1 inches [294 cm] |
| Length: | 206.5 inches [524 cm] |
| Height: | 120.2 inches [305 cm] |
| 4WD Ground clearance: | 23.2 inches [58 cm] |
| 2WD Ground clearance: | 31.5 inches [80 cm] |
| Rear axle: | Optional short axle: 3.937 by 110.5 inches [99x2806 mm] Standard axle: 3.937 by 118.5 inches [99x3009 mm] Optional large axle: 4.331 by 118.5 inches [110x3009 mm] |
| 2WD [152 to 213 cm] 2WD} 60 to 88 inches {4WD} [152 to 223 cm] {4WD} Front tread: | 60 to 84 inches |
| John Deere 8100 Tires | |
| 2WD Standard tires (ag): | Front: 11.00-24. Rear: 18.4R46, Front: 14.9R34. Rear: 18.4R46 |