John Deere 7330 Specifications - John Deere 7330 Specs

info
In the spring of 2011, production of the 7330 was moved from Waterloo to Mannheim. The 110-inch rear axle option was dropped at that time. The 7330 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS but upgraded systems with a cab were only available on the 7330 Premium.
Production
Manufacturer: John Deere
Factory: Waterloo, Iowa, USA, Mannheim, Baden-WГјrttemberg, Germany
Original price (USD): $77,688 (2011)
Variants
7330: base tractor
7330 Premium: deluxe tractor
7330 Premium High-Crop: high-clearance
Capacity
Fuel: 66 gal [249.8 L]
Hydraulic system: 13.7 gal [51.9 L]
Front axle: 8.8 qts [8.3 L]
Front hubs: 1.6 qts [1.5 L]
3-Point Hitch
Rear Type: II, 3N/2
Control: position control, electronic lower-link (optional ROPS)
Rear lift (at 24"/610mm): 8,800 lbs [3991 kg] (II), 8,200 lbs [3719 kg] (3N/2)
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Engine RPM: 540@1995 1000@1995
Dimensions & Tires
Wheelbase: 104.3 inches [264 cm]
Weight: 10800 to 12965 pounds
Front tire: 10.00-16
Rear tire: 18.4R38 (2WD)
7330 Serial Numbers
Location: Right side of main frame above front axle
- Serial numbers unknown -
John Deere 7330 Power
Engine (gross): 150 hp [111.9 kW]
PTO (claimed): 125 hp [93.2 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Steering: hydrostatic power
Brakes: differential hydraulic wet disc
Cab: Two-post Roll-Gard ROPS. Cab optional.
Hydraulics
Type: constant flow load sensing, closed-center load sensing (optional ROPS)
Capacity: 13.7 gal [51.9 L]
Pressure: 2900 psi [200.0 bar]
Valves: 2 to 4
Pump flow: 21.1 gpm [79.9 lpm], 29 gpm [109.8 lpm] (optional ROPS)
Electrical
Ground: negative
Charging system: alternator
Charging volts: 14
Battery
Volts: 12
info
Bore/Stroke: 4.19x5.00 inches [106 x 127 mm]
Rated Power (EC 97/98): 150 hp [111.9 kW]
Air cleaner: dual paper elements
Compression: 17.0:1
Rated RPM: 2100
Idle RPM: 850-2250
Operating RPM: 1500-2100
Torque: 507 lb-ft [687.5 Nm]
Torque RPM: 1500
Firing order: 1-5-3-6-2-4
Oil capacity: 20.8 qts [19.7 L]
Coolant capacity: 32.8 qts [31.0 L] (ROPS), 35.6 qts [33.7 L] (cab)
Intake valve clearance: 0.014 inches [0.356 mm]
Exhaust valve clearance: 0.018 inches [0.457 mm]
Engine Detail
John Deere 6068HRW74, turbocharged intercooled diesel, 6-cylinder 12-valve, liquid-cooled, 414.4 ci [6.8 L]
info
Speeds: With 18.4R38 rear tires.
Transmission
Transmission: John Deere PowrQuad
Type: partial power shift
Gears: 16 forward and reverse
Oil capacity: 54.8 qts [51.9 L]
Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
info
Previous model: John Deere 7320
Series back: John Deere 7230
Dimensions
Weight (shipping): 10,800 lbs [4898 kg] (2WD), 12,965 lbs [5880 kg] (4WD)
Weight (max capacity): 23,150 lbs [10500 kg]
Drawbar capacity: 4,960 lbs [2249 kg]
Front axle load: 4,520 lbs [2050 kg] (2WD), 10,580 lbs [4799 kg] (4WD), 11,025 lbs [5000 kg] (2WD with loader), 15,650 lbs [7098 kg] (4WD with loader)
Rear axle load: 16,535 lbs [7500 kg]
Wheelbase: 104.3 inches [264 cm]
Length: 187.3 inches [475 cm]
Width: 65.5 inches [166 cm] (flange axle)
Height (ROPS): 115.2 inches [292 cm], 90.8 inches [230 cm] (folded)
Height (cab): 114.4 inches [290 cm]
Clearance (front axle): 21.6 inches [54 cm] (2WD), 23 inches [58 cm] (4WD)
Clearance (rear axle): 28.2 inches [71 cm]
Clearance (drawbar): 19 inches [48 cm]
Rear axle: 60 inch length [1524 mm] (flange) 3.385 by 96 inches [85x2438 mm] (optional bar) 3.385 by 110.5 inches [85x2806 mm] (optional long bar)
Front tread: 77 to 101 inches (2WD) [195 to 256 cm] (2WD)
Rear tread: 60 to 100.3 inches (flange cast) [152 to 254 cm] (flange cast) 63.1 to 108.3 inches (flange steel) [160 to 275 cm] (flange steel) 60 to 88 inches (bar) [152 to 223 cm] (bar)
John Deere 7330 Tires
Standard tires (ag): Front: 10.00-16. Rear: 18.4R38 (2WD), Front: 14.9R28. Rear: 18.4R38 (4WD)