John Deere 7310R Specifications - John Deere 7310R Specs

info
2015 - 7R Series, Row-Crop tractor
Series back: John Deere 7290R
Production
Manufacturer: John Deere
Factory: Waterloo, Iowa, USA
Capacity
Exhaust fluid (DEF): 6.8 gal [25.7 L]
3-Point Hitch
Rear Type: III/IIIN
Control: electro-hydraulic draft sensing
Rear lift: 22500 lbs [10206 kg]
Rear Arms: hydraulic center link (optional)
Front Hitch: IIIN (optional)
Front lift (at ends): 11464 lbs [5200 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 1000 (1.75)
Front PTO: independent
Front RPM: 1000 (1.375), 1000 (1.75)
Dimensions & Tires
Wheelbase: 115 inches [292 cm]
7310R Serial Numbers
Location: Right side of tractor frame above front axle.
John Deere 7310R Power
Engine (gross): 310 hp [231.2 kW]
PTO (claimed): 260 hp [193.9 kW]
Drawbar (tested): 255.61 hp [190.6 kW]
PTO (tested): 309.83 hp [231.0 kW]
Mechanical
Chassis: 4x4 MFWD 4WD
Final drives: inboard planetary
Differential lock: full-locking electro-hydraulic rear, limited slip front, electro-hydraulic front (optional)
Steering: hydrostatic power, ActiveCommand Steering optional
Cab: CommandView III cab standard with air-conditioning. Optional premium cab with seat or cab suspension, right-hand windshield wiper, and electric mirror control.
Hydraulics
Type: closed-center pressure and flow compensated
Pressure: 2958 psi [204.0 bar]
Rear valves: 3 to 6
Pump flow: 43 gpm [162.8 lpm], 59 gpm [223.3 lpm] *Optional. Deere advertised 59 GPM as the flow rate of the 85cc pump but the tested rate was 58.3 GPM.
Rear SCV flow: 35 gpm [132.5 lpm]
Front SCV flow: 33 gpm [124.9 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 200, 240 (optional)
Battery
Number: 2
Cold-cranking amps: 925
Volts: 12
Group: 31
info
Bore/Stroke: 4.66x5.35 inches [118 x 136 mm]
Emissions: Tier 4
Rated Power (EC 97/98): 310 hp [231.2 kW]
Fuel system: electronic high pressure common rail
Air cleaner: two stage dry
Rated RPM: 2100
Starter: electric
Starter volts: 12
Engine Detail
John Deere, turbocharged diesel, 6-cylinder 24-valve, liquid-cooled inline, 549 ci [9.0 L]
info
Speeds: With Group 48 rear tires and 50 kph option.
Transmission
Transmission: John Deere e23
Type: full power shift
Gears: 23 forward and 11 reverse
Clutch: hydraulic wet disc
Full power shift transmission with manual, automatic, and custom-programmed shift modes. Available in 40 KPH or 50 KPH versions.
info
Series back: John Deere 7290R
Dimensions
Wheelbase: 115 inches [292 cm]
Length: 218 inches [553 cm]
Height (cab): 128 inches [325 cm] (G47 tires), 132 inches [335 cm] (G48 tires), 136 inches [345 cm] (G49 tires)
Clearance (front axle): 24 inches [60 cm] (G42 tires), 25 inches [63 cm] (G43 tires), 26 inches [66 cm] (G44 tires)
Clearance (rear axle): 23 inches [58 cm] (G47 tires), 25 inches [63 cm] (G48 tires), 27 inches [68 cm] (G49 tires)
Clearance (drawbar): 14 inches [35 cm] (G47 tires), 17 inches [43 cm] (G48 tires), 18 inches [45 cm] (G49 tires)
Front axle: 1300 MFWD Triple-Link Suspension Plus
Rear axle: 4.33 by 100.4 inches [109x2550 mm] 4.33 by 118.5 inches [109x3009 mm] 4.72 by 100.4 inches [119x2550 mm] 4.72 by 118.5 inches [119x3009 mm]
Front tread: 60 to 88 inches [152 to 223 cm]
info
Series back: John Deere 7290R
Loader
Loader type: John Deere H480
Height (to pin): 185 inches [469 cm]
Clearance, dumped bucket: 144 inches [365 cm]
Dump reach: 56 inches [142 cm]
Dump angle: 70
Reach at ground: 109 inches [276 cm]
Rollback angle: 45
Breakout force (at pin): 9000 lbs [4082 kg]
Breakout force (at 800mm): 8030 lbs [3642 kg]
Lift to full height (at pin): 4965 lbs [2252 kg]
Lift to full height (at 800mm): 5304 lbs [2405 kg]
Lift to 1.5m (at pin): 7282 lbs [3303 kg]
Raise time to height: 4.65 s
Bucket dump time: 1.72 s
Lowering time: 2.85 s
Rollback time: 1.72 s