John Deere 7230 Specifications - John Deere 7230 Specs

info
The basic 7230 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS. Upgraded systems with a cab were only available on the 7230 Premium model.
Production
Manufacturer: John Deere
Factory: Mannheim, Baden-WГјrttemberg, Germany
Original price (USD): $69,616 (2011)
Variants
7230: base tractor
7230 Premium: deluxe tractor
Capacity
Fuel: 54.7 gal [207.0 L], 66 gal [249.8 L] (optional)
Hydraulic system: 13.7 gal [51.9 L]
Front axle: 8.8 qts [8.3 L]
Front hubs: 1.6 qts [1.5 L]
3-Point Hitch
Rear Type: II
Control: position control, electronic lower-link (optional ROPS)
Rear lift (at 24"/610mm): 5,915 lbs [2683 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000, 540/540E/1000 (optional)
Engine RPM: 540@2124 540@2143 (reversible) 1000@2208
Dimensions & Tires
Wheelbase: 106.3 inches [270 cm] (2WD), 104.3 inches [264 cm] (4WD)
Weight: 9657 to 15075 pounds
Front tire: 10.00-16
Rear tire: 18.4R38 (2WD)
7230 Serial Numbers
Location: Right side of main frame above front axle
- Serial numbers unknown -
John Deere 7230 Power
Engine (gross): 135 hp [100.7 kW]
Engine: 135 hp [100.7 kW]
PTO (claimed): 110 hp [82.0 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Steering: hydrostatic power
Brakes: differential hydraulic wet disc
Cab: Two-post Roll-Gard ROPS. Cab optional.
Hydraulics
Type: constant flow load sensing, closed-center load sensing (optional ROPS)
Capacity: 13.7 gal [51.9 L]
Pressure: 2900 psi [200.0 bar]
Valves: 2 to 4
Pump flow: 21.1 gpm [79.9 lpm], 29 gpm [109.8 lpm] (optional ROPS)
Electrical
Ground: negative
Charging system: alternator
Charging amps: 90
Battery
Volts: 12
info
Bore/Stroke: 4.19x5.00 inches [106 x 127 mm]
Power: 135 hp [100.7 kW]
Air cleaner: dual paper elements
Rated RPM: 2300
Idle RPM: 850-2460
Operating RPM: 1500-2300
Torque: 389 lb-ft [527.5 Nm]
Torque RPM: 1500
Firing order: 1-5-3-6-2-4
Starter volts: 12
Starter power: 4 hp [3.0 kW]
Oil capacity: 20.8 qts [19.7 L]
Coolant capacity: 32.8 qts [31.0 L] (ROPS), 35.6 qts [33.7 L] (cab)
Intake valve clearance: 0.014 inches [0.356 mm]
Exhaust valve clearance: 0.018 inches [0.457 mm]
Engine Detail
John Deere 6068HL280, turbocharged diesel, 6-cylinder 12-valve, liquid-cooled, 414.4 ci [6.8 L]
info
Speeds: With 18.4R38 rear tires.
Transmission
Transmission: John Deere SyncroPlus
Type: full synchro shift
Gears: 12 forward and 4 reverse
Oil capacity: 54.8 qts [51.9 L]
Four ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Cluch must be used to change range or gear. Only avaialable with ROPS.
info
Previous model: John Deere 7220
Series next: John Deere 7330
Series back: John Deere 7130
Dimensions
Weight (shipping): 9,657 lbs [4380 kg] (2WD), 10,252 lbs [4650 kg] (4WD)
Weight (operating): 12,755 lbs [5785 kg] (4WD)
Weight (ballasted): 15,075 lbs [6838 kg]
Weight (max capacity): 20,945 lbs [9500 kg]
Drawbar capacity: 4,960 lbs [2249 kg]
Front axle load: 4,520 lbs [2050 kg] (2WD), 9,920 lbs [4499 kg] (4WD), 11,025 lbs [5000 kg] (2WD with loader), 14,505 lbs [6579 kg] (4WD with loader)
Rear axle load: 15,210 lbs [6899 kg]
Wheelbase: 106.3 inches [270 cm] (2WD), 104.3 inches [264 cm] (4WD)
Length: 187.3 inches [475 cm]
Width: 65.5 inches [166 cm] (flange axle ends)
Height (ROPS): 115.2 inches [292 cm], 90.8 inches [230 cm] (folded)
Height (cab): 114.4 inches [290 cm]
Clearance (front axle): 21.6 inches [54 cm] (2WD), 23 inches [58 cm] (4WD)
Clearance (rear axle): 28.2 inches [71 cm]
Clearance (drawbar): 19 inches [48 cm]
Rear axle: 65.5 inch length [1663 mm] (flange) 3.1 by 100.6 inches [78x2555 mm] (optional bar)
Front tread: 59.5 to 85.5 inches (2WD) [151 to 217 cm] (2WD) 59.4 to 88 inches (4WD) [150 to 223 cm] (4WD)
Rear tread: 63.5 to 72.5 inches [161 to 184 cm]
2WD turn radius: 15.3 feet [4.7 m]
4WD turn radius: 16.1 feet [4.9 m]
John Deere 7230 Tires
Standard tires (ag): Front: 10.00-16. Rear: 18.4R38 (2WD), Front: 14.9R24. Rear: 18.4R38 (4WD)