FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Series: | → 7230 |
| Production | |
| Manufacturer: | John Deere |
| Type: | Row-Crop tractor |
| Factory: | Mannheim, Baden-WГјrttemberg, Germany |
| The basic Deere 7130 was available a basic cab or open-operator station with ROPS. Upgraded hydraulics and hitch were optional on open-operator station models. Upgraded systems with a cab were only available on the 7130 Premium. | |
| Variants | |
| 7130: | base tractor |
| 7130 Premium: | deluxe tractor |
| John Deere 7130 Power | |
| Engine (gross): | 125 hp 93.2 kW |
| PTO (claimed): | 100 hp 74.6 kW |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Two-post Roll-Gard ROPS. Cab optional. |
| Transmissions: | 12-speed full synchro shift, 16-speed full synchro shift, 16-speed partial power shift, 24-speed partial power shift |
| Capacity | |
| Fuel: | 54.7 gal 207.0 L, 66 gal 249.8 L (optional) |
| Hydraulic system: | 13.7 gal 51.9 L, 15.9 gal 60.2 L |
| Front axle: | 8.8 qts 8.3 L |
| Front hubs: | 1.6 qts 1.5 L |
| Hydraulics | |
| Type: | constant flow load sensing, closed-center load sensing (optional with ROPS) |
| Capacity: | 13.7 gal 51.9 L, 15.9 gal 60.2 L |
| Pressure: | 2900 psi 200.0 bar |
| Valves: | 1 to 4 |
| Pump flow: | 21.1 gpm 79.9 lpm, 29 gpm 109.8 lpm (optional with ROPS) |
| Tractor hitch | |
| Rear Type: | II |
| Control: | position control, electronic lower-link (optional with ROPS) |
| Rear lift (at 24"/610mm): | 5,915 lbs 2683 kg |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Dimensions & Tires | |
| Wheelbase: | 106.3 inches 270 cm (2WD), 104.3 inches 264 cm |
| Weight: | 9657 to 12340 pounds |
| Front tire: | 10.00-16 |
| Rear tire: | 18.4R38 (2WD) |
| 7130 Serial Numbers | |
| Location: | Right side of main frame above front axle |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 90 |
| Battery volts: | 12 |
| info | |
| Series: | → 7230 |
| Engines overview | |
| John Deere 6.8L 6-cyl diesel, John Deere 4.5L 4-cyl diesel |
| Engine Detail | |
| John Deere PowerTech E 4045HL288, turbocharged diesel, 4-cylinder 8-valve, liquid-cooled, The Deere 7130 switched to a four-cylinder engine with the 2010 model year. | |
| Displacement: | 276 ci 4.5 L |
| Bore/Stroke: | 4.19x5.00 inches 106 x 127 mm |
| Emissions: | Tier III |
| Rated Power (EC 97/98): | 125 hp 93.2 kW |
| Fuel system: | high-pressure common rail |
| Air cleaner: | dual paper elements |
| Compression: | 19:1 |
| Rated RPM: | 2300 |
| Idle RPM: | 850-2460 |
| Operating RPM: | 1600-2300 |
| Torque: | 372 lb-ft 504.4 Nm |
| Torque RPM: | 1600 |
| Firing order: | 1-3-4-2 |
| Starter volts: | 12 |
| Starter power: | 4 hp 3.0 kW |
| Oil capacity: | 16.8 qts 15.9 L |
| Intake valve clearance: | 0.014 inches 0.356 mm |
| Exhaust valve clearance: | 0.018 inches 0.457 mm |
| info | |
| Series: | → 7230 |
| Transmissions overview | |
| 12-speed full synchro shift, 16-speed full synchro shift, 16-speed partial power shift, 24-speed partial power shift |
| Transmission | |
| Transmission: | John Deere PowrQuad |
| Type: | partial power shift |
| Gears: | 24 forward and reverse |
| Oil capacity: | 54.8 qts 51.9 L |
| Six ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. | |
| Speeds | |
| With 18.4R38 rear tires. Reverse speeds are approximately 5% faster than listed forward speeds., |
| info | |
| Series: | → 7230 |
| John Deere 7130 Tires | |
| Standard tires (ag): | Front: 10.00-16. Rear: 18.4R38 (2WD), Front: 14.9R24. Rear: 18.4R38 (4WD) |
| Dimensions | |
| Wheelbase: | 106.3 inches 270 cm (2WD), 104.3 inches 264 cm |
| Length: | 187.3 inches 475 cm |
| Width: | 65.5 inches 166 cm (flange axle ends) |
| Clearance (front axle): | 21.6 inches 54 cm (2WD), 23 inches 58 cm (4WD) |
| Clearance (rear axle): | 28.2 inches 71 cm |
| Clearance (drawbar): | 19 inches 48 cm |
| Rear axle: | 3.1 by 100.6 inches 78 by 2555 mm ( |
| Front tread: | 59.4 to 88 inches 150 to 223 cm (4WD) |
| Rear tread: | 63.5 to 72.5 inches 161 to 184 cm |
| John Deere 7130 Weight | |
| Shipping: | 9,657 lbs 4380 kg (2WD), 10,252 lbs 4650 kg (4WD) |
| Operating: | 12,340 lbs 5597 kg |
| Max capacity: | 18,740 lbs 8500 kg |
| Max Drawbar: | 4,960 lbs 2249 kg |
| Max front axle: | 4,520 lbs 2050 kg (2WD), 9,260 lbs 4200 kg (4WD), 11,025 lbs 5000 kg (2WD with loader), 14,505 lbs 6579 kg (4WD with loader) |
| Max rear axle: | 14,330 lbs 6500 kg |
| John Deere 7130 Height | |
| ROPS: | 115.2 inches 292 cm, 90.8 inches 230 cm (folded) |
| Cab: | 114.4 inches 290 cm |