FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2008 - 2017 6D Series, Model years 2008-20122013-2017, Utility tractor | |
Series back: | John Deere 6130D |
Production | |
Manufacturer: | John Deere |
Factory: | Saltillo, Mexico |
Original price (USD): | $58,752 (2011) |
Capacity | |
Fuel: | 41.7 gal [157.8 L] |
Hydraulic system: | 15.3 gal [57.9 L] |
Front axle: | 6.9 qts [6.5 L] |
Front hubs: | 2.1 qts [2.0 L] (each) |
3-Point Hitch | |
Rear Type: | II |
Control: | mechanical lower link |
Rear lift (at 24"/610mm): | 6,800 lbs [3084 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | dry disc |
Rear RPM: | 540/1000 (1.375) |
Engine RPM: | 540@2100 1000@2100 |
Dimensions & Tires | |
Wheelbase: | 92.5 inches [234 cm] |
Weight: | 8730 to 13095 pounds |
Front tire: | 14.9-24 |
Rear tire: | 18.4-34 |
6140D Serial Numbers | |
Location: | Right side of main tractor frame above front axle. |
- Serial numbers unknown - |
John Deere 6140D Power | |
Engine (gross): | 137.8 hp [102.8 kW] |
PTO (claimed): | 115 hp [85.8 kW] |
Drawbar (tested): | 96.68 hp [72.1 kW] |
PTO (tested): | 117.41 hp [87.6 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Steering: | hydrostatic power |
Brakes: | differential mechanical wet disc |
Cab: | Folding 2-post ROPS or cab with heat and A/C |
Hydraulics | |
Type: | open center |
Capacity: | 15.3 gal [57.9 L] |
Pressure: | 2830 psi [195.1 bar] |
Valves: | 2 to 3 |
Pump flow: | 17.6 gpm [66.6 lpm] |
Steering flow: | 6.9 gpm [26.1 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 70 (ROPS), 90 (cab) |
Battery | |
Number: | 1 |
Cold-cranking amps: | 925 |
Volts: | 12 |
Amp-hours: | 180 |
Group: | 31 |
info | |
Bore/Stroke: | 4.20x5.00 inches [107 x 127 mm] |
Emissions: | Tier 3 |
Rated Power (EC 97/98): | 137.8 hp [102.8 kW] |
Fuel system: | Denso electronic high-pressure common rail |
Compression: | 19:1 |
Rated RPM: | 2100 |
Idle RPM: | 900-2200 |
Torque: | 387 lb-ft [524.8 Nm] |
Torque RPM: | 1500 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Oil capacity: | 13 qts [12.3 L] |
Oil change: | 250 h, 500 h (JD TorqGARD oil) |
Coolant capacity: | 17.4 qts [16.5 L] |
Intake valve clearance: | 0.014 inches [0.356 mm] |
Exhaust valve clearance: | 0.018 inches [0.457 mm] |
Engine Detail | |
John Deere 4045H PowerTech E, intercooled turbocharged diesel, 4-cylinder 8-valve, liquid-cooled, 276 ci [4.5 L] |
info | |
Speeds: | With 18.4-34 rear tires. |
Transmission | |
Transmission: | John Deere PowrReverser |
Type: | partially synchronized with power shuttle |
Gears: | 9 forward and reverse |
Clutch: | hydraulic wet disc |
Oil capacity: | 61.2 qts [57.9 L] |
Three gears (1-3) in each of three ranges (A-C) plus left-hand reverser. Forward/reverse powershift. Synchronized shift between gears with clutch. Shifts between ranges are unsynchronized: the tractor must be stopped and clutch used to shift range. |
info | |
Series back: | John Deere 6130D |
Dimensions | |
Weight (shipping): | 8,730 lbs [3959 kg] (ROPS), 9,390 lbs [4259 kg] (cab) |
Weight (operating): | 9,920 lbs [4499 kg] (cab) |
Weight (ballasted): | 13,095 lbs [5939 kg] |
Wheelbase: | 92.5 inches [234 cm] |
Length: | 166 inches [421 cm] |
Width: | 72 inches [182 cm] |
Height (cab): | 107.5 inches [273 cm] |
Height (exhaust): | 106 inches [269 cm] |
Clearance (front axle): | 18 inches [45 cm] |
Rear axle: | 72 inch length [1828 mm] (flange) |
Front tread: | 63.6 to 79.4 inches [161 to 201 cm] |
Rear tread: | 59.5/63.5/67.6/71.3/75.4/79.4 inches [151/161/171/181/191/201 cm] |
4WD turn radius: | 14.7 feet [4.5 m] |
John Deere 6140D Tires | |
Standard tires (ag): | Front: 14.9-24. Rear: 18.4-34 |
Optional tires (ag): | Front: 14.9-24. Rear: 18.4-38 |
info | |
Series back: | John Deere 6130D |
Loader | |
Loader type: | John Deere 673 |
Height (to pin): | 140 inches [355 cm] |
Clearance, dumped bucket: | 99 inches [251 cm] |
Dump reach: | 43 inches [109 cm] |
Dump angle: | 75 |
Reach at ground: | 97.1 inches [246 cm] |
Rollback angle: | 47 |
Breakout force (at pin): | 7,284 lbs [3304 kg], 6,217 lbs [2820 kg] (MSL) |
Breakout force (at 800mm): | 5,328 lbs [2416 kg], 5,440 lbs [2467 kg] (MSL) |
Breakout force (bucket): | 5,823 lbs [2641 kg], 6,474 lbs [2936 kg] (MSL) |
Lift to full height (at pin): | 3,964 lbs [1798 kg], 3,594 lbs [1630 kg] (MSL) |
Lift to full height (at 800mm): | 2,782 lbs [1261 kg], 3,790 lbs [1719 kg] (MSL) |
Lift to 1.5m (at pin): | 5,536 lbs [2511 kg], 4,861 lbs [2204 kg] (MSL) |
Lift to 1.5m (at 800mm): | 4,246 lbs [1925 kg], 4,641 lbs [2105 kg] (MSL) |
Bucket width: | 85 inches [215 cm] |
Raise time to height: | 6.6 s, 6 s (MSL) |
Bucket dump time: | 5.6 s, 5.1 s (MSL) |
Lowering time: | 5.8 s, 5.2 s (MSL) |
Rollback time: | 6.0 s, 5.4 s (MSL) |