FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Series: | → 6140D |
| Production | |
| Manufacturer: | John Deere |
| Type: | Utility tractor |
| Factory: | Saltillo, Mexico |
| Original price: | $53,639 (2011) |
| John Deere 6130D Power | |
| Engine (gross): | 129.8 hp 96.8 kW |
| PTO (claimed): | 105 hp 78.3 kW |
| Drawbar (tested): | 91.70 hp 68.4 kW |
| PTO (tested): | 109.64 hp 81.8 kW |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Brakes: | independent mechanical wet disc |
| Cab: | Folding 2-post ROPS or cab with heat and A/C |
| Transmissions: | 9-speed partially synchronized with power shuttle, 9-speed partially synchronzied |
| Capacity | |
| Fuel: | 41.7 gal 157.8 L |
| Hydraulic system: | 15.3 gal 57.9 L |
| Front axle: | 6.9 qts 6.5 L |
| Front hubs: | 2.1 qts 2.0 L (each) |
| Hydraulics | |
| Type: | open center |
| Capacity: | 15.3 gal 57.9 L |
| Pressure: | 2830 psi 195.1 bar |
| Valves: | 2 to 3 |
| Pump flow: | 17.6 gpm 66.6 lpm |
| Steering flow: | 6.9 gpm 26.1 lpm |
| Tractor hitch | |
| Rear Type: | II |
| Control: | mechanical lower link |
| Rear lift (at 24"/610mm): | 6,800 lbs 3084 kg |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | dry disc |
| Rear RPM: | 540/1000 (1.375) |
| Engine RPM: | 540@2100 1000@2100 |
| Dimensions & Tires | |
| Wheelbase: | 92.5 inches 234 cm |
| Weight: | 8730 to 9920 pounds |
| Front tire: | 14.9-24 |
| Rear tire: | 18.4-34 |
| 6130D Serial Numbers | |
| Location: | Serial number plate on the right side of the tractor frame, above the front axle. |
| photo of 6130D serial number | |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 70 (ROPS), 90 (cab) |
| Battery CCA: | 925 |
| Battery volts: | 12 |
| Battery AH: | 180 |
| Battery Group: | 31 |
| info | |
| Series: | → 6140D |
| Engine Detail | |
| John Deere 4045H PowerTech E, intercooled turbocharged diesel, 4-cylinder 8-valve, liquid-cooled | |
| Displacement: | 276 ci 4.5 L |
| Bore/Stroke: | 4.20x5.00 inches 107 x 127 mm |
| Emissions: | Tier 3 |
| Rated Power (EC 97/98): | 129.8 hp 96.8 kW |
| Fuel system: | Denso electronic high-pressure common rail |
| Compression: | 19:1 |
| Rated RPM: | 2100 |
| Idle RPM: | 900-2200 |
| Torque: | 387 lb-ft 524.8 Nm |
| Torque RPM: | 1500 |
| Firing order: | 1-3-4-2 |
| Starter volts: | 12 |
| Coolant capacity: | 17.4 qts 16.5 L |
| Intake valve clearance: | 0.014 inches 0.356 mm |
| Exhaust valve clearance: | 0.018 inches 0.457 mm |
| Engine Oil | |
| Oil capacity: | 15.85 qts 15.0 L |
| Oil change: | 250 h, 500 h (JD TorqGARD oil) |
| info | |
| Series: | → 6140D |
| Transmissions overview | |
| 9-speed partially synchronized with power shuttle, 9-speed partially synchronzied |
| Transmission | |
| Transmission: | John Deere Top Shaft Syncronized (TSS) |
| Type: | partially synchronzied |
| Gears: | 9 forward and 3 reverse |
| Clutch: | dry disc |
| Oil capacity: | 61.2 qts 57.9 L |
| Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shifts between gears, including to reverse, are synchronized using the clutch. Shifts between ranges are not synchronized, the operator must stop the tractor and use the clutch. | |
| Speeds | |
| With 18.4-34 rear tires., |
| info | |
| Series: | → 6140D |
| John Deere 6130D Tires | |
| Standard tires (ag): | Front: 14.9-24. Rear: 18.4-34 |
| Optional tires (ag): | Front: 14.9-24. Rear: 18.4-38 |
| Dimensions | |
| Wheelbase: | 92.5 inches 234 cm |
| Length: | 166 inches 421 cm |
| Width: | 72 inches 182 cm |
| Height (cab): | 107.5 inches 273 cm |
| Height (exhaust): | 106 inches 269 cm |
| Clearance (front axle): | 18 inches 45 cm |
| Rear axle: | 72 inch length 1828 mm ( |
| Front tread: | 63.6 to 79.4 inches 161 to 201 cm |
| Rear tread: | 59.5/63.5/67.6/71.3/75.4/79.4 inches 151/161/171/181/191/201 cm |
| John Deere 6130D Weight | |
| Shipping: | 8,730 lbs 3959 kg (ROPS), 9,390 lbs 4259 kg (cab) |
| Operating: | 9,920 lbs 4499 kg (cab) |
| Ballasted: | 12,370 lbs 5611 kg |
| info | |
| Series: | → 6140D |
| John Deere 563 Loader | |
| Height (to pin): | 133.8 inches 339 cm |
| Clearance, dumped bucket: | 93.2 inches 236 cm |
| Dump reach: | 36.4 inches 92 cm |
| Dump angle: | 71° |
| Reach at ground: | 87.6 inches 222 cm |
| Rollback angle: | 41° |
| Breakout force (at pin): | 6,632 lbs 3008 kg, 5,665 lbs 2569 kg (MSL) |
| Breakout force (at 800mm): | 4,698 lbs 2131 kg, 4,743 lbs 2151 kg (MSL) |
| Breakout force (bucket): | 4,900 lbs 2222 kg, 4,766 lbs 2161 kg (MSL) |
| Lift to full height (at pin): | 4,063 lbs 1842 kg, 3,168 lbs 1437 kg (MSL) |
| Lift to full height (at 800mm): | 2,773 lbs 1257 kg, 3,311 lbs 1501 kg (MSL) |
| Lift to 1.5m (at pin): | 5,154 lbs 2337 kg, 4,281 lbs 1941 kg (MSL) |
| Lift to 1.5m (at 800mm): | 3,880 lbs 1759 kg, 4,021 lbs 1823 kg (MSL) |
| Bucket width: | 73 inches 185 cm |
| Raise time to height: | 5.6 s, 4.8 s (MSL) |
| Bucket dump time: | 5.1 s, 4 s (MSL) |
| Lowering time: | 4.8 s, 4.1 s (MSL) |
| Rollback time: | 5.4 s, 4.1 s (MSL) |
| John Deere 673 Loader | |
| Height (to pin): | 140 inches 355 cm |
| Clearance, dumped bucket: | 99 inches 251 cm |
| Dump reach: | 43 inches 109 cm |
| Dump angle: | 75° |
| Reach at ground: | 97.1 inches 246 cm |
| Rollback angle: | 47° |
| Breakout force (at pin): | 7,284 lbs 3304 kg, 6,217 lbs 2820 kg (MSL) |
| Breakout force (at 800mm): | 5,328 lbs 2416 kg, 5,440 lbs 2467 kg (MSL) |
| Breakout force (bucket): | 5,823 lbs 2641 kg, 6,474 lbs 2936 kg (MSL) |
| Lift to full height (at pin): | 3,964 lbs 1798 kg, 3,594 lbs 1630 kg (MSL) |
| Lift to full height (at 800mm): | 2,782 lbs 1261 kg, 3,790 lbs 1719 kg (MSL) |
| Lift to 1.5m (at pin): | 5,536 lbs 2511 kg, 4,861 lbs 2204 kg (MSL) |
| Lift to 1.5m (at 800mm): | 4,246 lbs 1925 kg, 4,641 lbs 2105 kg (MSL) |
| Bucket width: | 85 inches 215 cm |
| Raise time to height: | 6.6 s, 6 s (MSL) |
| Bucket dump time: | 5.6 s, 5.1 s (MSL) |
| Lowering time: | 5.8 s, 5.2 s (MSL) |
| Rollback time: | 6.0 s, 5.4 s (MSL) |