FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1992 - 1997 5000 Utility Series, Utility tractor | |
Next model: | John Deere 5210 |
Series next: | John Deere 5300 |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Original price (USD), $20,000 (1997 ), |
Capacity | |
Fuel: | 18 gal [68.1 L] |
3-Point Hitch | |
Rear Type: | II/I |
Control: | position control with top-link draft sensing |
Rear lift (at 24"/610mm): | 3,374 lbs [1530 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 80.7 inches [204 cm] |
Weight: | 4250 to 4650 pounds |
Front tire: | 6.50-16 |
2WD Rear tire: | 13.6-28 |
5200 Serial Numbers | |
Location: | On main right side of main tractor frame, near front axle. |
Links | |
Temperature sensor: potential cold-start advance sensor failure leading to a no-start condition |
John Deere 5200 Power | |
Engine (gross): | 45.6 hp [34.0 kW] |
PTO (claimed): | 40 hp [29.8 kW] |
Drawbar (tested): | 35.74 hp [26.7 kW] |
PTO (tested): | 41.90 hp [31.2 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Differential lock: | mechanical standard |
Steering: | power |
Brakes: | hydraulic wet disc |
Cab: | Two-post folding ROPS. Cab optional with air-conditioning. |
Hydraulics | |
Type: | open center |
Pressure: | 2750 psi [189.6 bar] |
Valves: | 1 to 3 |
Pump flow: | 11.4 gpm [43.1 lpm] |
Total flow: | 18.2 gpm [68.9 lpm] |
Steering flow: | 6.8 gpm [25.7 lpm] |
Electrical | |
Ground: | negative |
Battery | |
Number: | 1 |
Volts: | 12 |
info | |
Bore/Stroke: | 4.19x4.33 inches [106 x 110 mm] |
Power (gross): | 45.6 hp [34.0 kW] |
Fuel system: | indirect injection |
Pre-heating: | thermostart |
Compression: | 17.8:1 |
Rated RPM: | 2400 |
Operating RPM: | 1600-2400 |
Starter volts: | 12 |
Coolant capacity: | 10 qts [9.5 L] |
Engine Detail | |
John Deere, diesel, 3-cylinder, liquid-cooled, 179 ci [2.9 L] |
info | |
Next model: | John Deere 5210 |
Series next: | John Deere 5300 |
Transmission | |
Transmission: | John Deere Collar Shift |
Type: | unsynchronized gear |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Three gears (1-3), plus reverse, with three ranges (A-C). Tractor must be stopped, and clutch used, to shift gear or range. |
info | |
Next model: | John Deere 5210 |
Series next: | John Deere 5300 |
Dimensions | |
2WD ROPS Weight: | 4250 lbs [1927 kg] |
4WD ROPS Weight: | 4650 lbs [2109 kg] |
Wheelbase: | 80.7 inches [204 cm] |
2WD Length: | 122.6 inches [311 cm] |
4WD Length: | 125.9 inches [319 cm] |
Width: | 65.4 inches [166 cm] |
Height (steering wheel): | 62.8 inches [159 cm] |
2WD Height (hood): | 56.1 inches [142 cm] |
4WD Height (hood): | 57.2 inches [145 cm] |
Height (ROPS): | 87.8 inches [223 cm] |
2WD Clearance (front axle): | 19.5 inches [49 cm] |
4WD Clearance (front axle): | 13.4 inches [34 cm] |
2WD turn radius: | 11.3 feet [3.4 m], 9.7 feet [3.0 m] (with brakes) |
4WD turn radius: | 11.3 feet [3.4 m], 10.2 feet [3.1 m] (with brakes) |
John Deere 5200 Tires | |
2WD Standard tires (ag): | Front: 6.50-16. Rear: 13.6-28 |
4WD Standard tires (ag): | Front: 8.3-24. Rear: 13.6-28 |
info | |
The model 520/522 loaders fit to tractors with two-wheel drive while the 540/542 were for tractors with four-wheel drive. |
Loader | |
Loader type: | John Deere 540 |
Height (to pin): | 126 inches [320 cm] |
Clearance, dumped bucket: | 103 inches [261 cm] |
Dump reach: | 34.6 inches [87 cm] |
Dump angle: | 40 |
Reach at ground: | 80 inches [203 cm] |
Rollback at ground: | 20 |
Breakout force (lift): | 3,484 lbs [1580 kg] |
Lift to full height (at pin): | 2,500 lbs [1134 kg] |