John Deere 5085M Specifications - John Deere 5085M Specs

info
-10oF [-23oC]↑: : JDM J20C
10o↔104oF [-12o↔40oC]: : BIO HY-GARD JDM 20D
Production
Manufacturer: John Deere
Factory: Augusta, Georgia, USA
Original price (USD): $41,671 (2WD ROPS), $52,340 (4WD cab)
Capacity
Fuel: 30.3 gal [114.7 L] (ROPS), 40.7 gal [154.0 L] (cab)
Hydraulic system: 11.9 gal [45.0 L]
Front hubs: 0.84 qts [0.8 L] (each)
Front diff.: 5.3 qts [5.0 L]
3-Point Hitch
Rear Type: II/I
Rear lift (at 24"/610mm): 3,595 lbs [1630 kg], 4,498 lbs [2040 kg] (optional)
Power Take-off (PTO)
Rear PTO: independent electrohydraulic
Rear RPM: 540/540E, 540/540E/1000 (optional)
Dimensions & Tires
Weight: 6393 to 8000 pounds
Front tire: 7.5-16
Rear tire: 16.9-30
5085M Serial Numbers
Location: Tractor frame on front left side.
John Deere 5085M Power
Engine: 85 hp [63.4 kW]
PTO (claimed): 70 hp [52.2 kW]
PTO (tested): 74.07 hp [55.2 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Final drives: inboard planetary
Differential lock: shift-on-the-move electro-hydraulic rear differential lock
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Foldable ROPS. Optional deluxe ROPS with upgraded seat. Optional cab with heat and air conditioning.
Hydraulics
Type: open center
Capacity: 11.9 gal [45.0 L]
Pressure: 2828 psi [195.0 bar]
Valves: 0, 2 or 3 (rear), 0, 2 or 3 (mid)
Pump flow: 18.4 gpm [69.6 lpm]
Total flow: 24.7 gpm [93.5 lpm]
Steering flow: 6.3 gpm [23.8 lpm]
Steering press.: 1922 psi [132.5 bar]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 70 (ROPS), 90 (cab), 120 (optional)
Battery
Number: 1
Cold-cranking amps: 925
Volts: 12
Group: 31
info
Bore/Stroke: 4.19x5.00 inches [106 x 127 mm]
Emissions: Tier 3
Power: 85 hp [63.4 kW]
Air cleaner: dry
Rated RPM: 2200
Torque: 331 lb-ft [448.8 Nm]
Torque RPM: 1600
Starter volts: 12
Oil capacity: 8.8 qts [8.3 L]
Coolant capacity: 12 qts [11.4 L]
Engine Detail
John Deere PowerTech M 4045, turbocharged diesel, 4-cylinder, liquid-cooled, 276 ci [4.5 L]
info
Speeds: With 16.9-30 rear tires.
Transmission
Transmission: SyncReverser
Type: partially synchronized
Gears: 16 forward and reverse
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Synchronized shuttle shift with reverser lever, or speed change with speed shift lever, while moving using the clutch. Tractor must be stopped to change ranges.
info
Previous model: John Deere 5425
Series next: John Deere 5095M
Series back: John Deere 5075M
Dimensions
Weight (operating): 6,393 lbs [2899 kg] (2WD ROPS), 6,850 lbs [3107 kg] (2WD deluxe ROPS), 7,600 lbs [3447 kg] (4WD cab), 6,800 lbs [3084 kg] (4WD ROPS), 7,250 lbs [3288 kg] (4WD deluxe ROPS), 8,000 lbs [3628 kg] (4WD cab)
Ground clearance: 18.8 inches [47 cm] (front axle)
Front tread: 57.6 to 82.6 inches (2WD) [146 to 209 cm] (2WD) 52.8 to 75 inches (4WD) [134 to 190 cm] (4WD)
Rear tread: 53.1 to 80.9 inches [134 to 205 cm]
2WD turn radius: 12.8 feet [3.9 m], 11.2 feet [3.4 m] (with brakes)
4WD turn radius: 12.7 feet [3.9 m], 10.8 feet [3.3 m] (with brakes)
John Deere 5085M Tires
Ag front: 11L-15 (2WD), 9.5-24 (4WD), 11.2R24 (4WD), 12.4R24 (4WD), 13.6R24 (4WD), 230/95R32 (4WD)
Ag rear: 14.9-28, 16.9-28, 420/90R30, 480/80R30, 15.5R38, 16.9R34, 230/95R48
Lawn/turf front: 27/12LL-15 (2WD), 12LL-16 (4WD), 44x18-20 (4WD)
Lawn/turf rear: 22.5LL-16.1, 23.1-26
Industrial front: 11LL-15 (2WD), 12.5/80-18 (4WD)
Industrial rear: 19.5L-24, 16.9-24
info
Previous model: John Deere 5425
Series next: John Deere 5095M
Series back: John Deere 5075M
Loader
Loader type: John Deere 563
Height (to pin): 133 inches [337 cm]
Clearance, dumped bucket: 97 inches [246 cm]
Dump reach: 50 inches [127 cm]
Dump angle: 72
Reach at ground: 88 inches [223 cm]
Rollback angle: 44
Breakout force (at pin): 6,654 lbs [3018 kg]
MSL Breakout force (at pin): 5,665 lbs [2569 kg]
Lift to full height (at pin): 3,982 lbs [1806 kg]
MSL Lift to full height (at pin): 3,121 lbs [1415 kg]