FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2013 - 2018 5E Series, Model years 2013-20142015-2018, Utility tractor | |
| Previous model: | John Deere 5083E |
| Series next: | John Deere 5100E |
| Series back: | John Deere 5075E |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Original price (USD), $41,102 (2014 ROPS ), $50,040 (2014 Cab ), | |
| Capacity | |
| ROPS Fuel: | 25 gal [94.6 L] |
| Cab Fuel: | 30 gal [113.6 L] |
| 3-Point Hitch | |
| Rear Type: | II |
| Control: | top link draft sensing |
| Rear lift (at 24"/610mm): | 3213 lbs [1457 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | electro-hydraulic |
| Rear RPM: | 540/540E (1.375) |
| Engine RPM: | 540@2400 540E@1700 |
| Dimensions & Tires | |
| Wheelbase: | 90.6 inches [230 cm] |
| Weight: | 7055 to 7937 pounds |
| Front tire: | 11.2-24 |
| Rear tire: | 16.9-30 |
| John Deere 5085E Power | |
| Engine (gross): | 85 hp [63.4 kW] |
| PTO (claimed): | 70 hp [52.2 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Final drives: | inboard planetary |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Two-post foldable ROPS. Cab optional. |
| Hydraulics | |
| Type: | open center |
| Rear valves: | 0, 2 or 3 |
| Mid valves: | 0, 2 or 3 |
| Pump flow: | 15.9 gpm [60.2 lpm] |
| Total flow: | 22.5 gpm [85.2 lpm] |
| Steering flow: | 6.6 gpm [25.0 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 90, 120*Optional |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.19x5.00 inches [106 x 127 mm] |
| Emissions: | Interim Tier IV |
| Rated Power (EC 97/98): | 85 hp [63.4 kW] |
| Rated RPM: | 2400 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| John Deere PowerTech 4045, turbocharged diesel, 4-cylinder, liquid-cooled, 276 ci [4.5 L] |
| info | |
| Previous model: | John Deere 5083E |
| Series next: | John Deere 5100E |
| Series back: | John Deere 5075E |
| Transmission | |
| Transmission: | PowrReverser |
| Type: | partially synchronized |
| Gears: | 12 forward and reverse |
| Clutch: | wet disc |
| Four synchronized gears (1-4) in three non-synchronized ranges (A-C) with lever hand power shuttle. | |
| info | |
| Previous model: | John Deere 5083E |
| Series next: | John Deere 5100E |
| Series back: | John Deere 5075E |
| Dimensions | |
| ROPS Weight: | 7055 lbs [3200 kg] |
| Cab Weight: | 7937 lbs [3600 kg] |
| Wheelbase: | 90.6 inches [230 cm] |
| Length: | 154.5 inches [392 cm] |
| Width: | 69.6 inches [176 cm] |
| Height (hood): | 62.7 inches [159 cm] |
| Height (ROPS): | 99.8 inches [253 cm], 77.6 inches [197 cm] (folded) |
| Height (cab): | 100.2 inches [254 cm] |
| ROPS Clearance (front axle): | 16 inches [40 cm] |
| Cab Clearance (front axle): | 15.2 inches [38 cm] |
| Rear axle: | Flange |
| Front tread: | 52.8 to 75 inches [134 to 190 cm] |
| John Deere 5085E Tires | |
| Standard tires (ag): | Front: 11.2-24. Rear: 16.9-30 |
| info | |
| Previous model: | John Deere 5083E |
| Series next: | John Deere 5100E |
| Series back: | John Deere 5075E |
| Loader | |
| Loader type: | John Deere H260 MSL |
| Height (to pin): | 135 inches [342 cm] |
| Clearance, dumped bucket: | 95 inches [241 cm] |
| Dump reach: | 43 inches [109 cm] |
| Dump angle: | 73 |
| Reach at ground: | 101 inches [256 cm] |
| Rollback at ground: | 44 |
| Breakout force (at pin): | 5522 lbs [2504 kg] |
| Breakout force (at 800mm): | 4853 lbs [2201 kg] |
| Lift to full height (at pin): | 3210 lbs [1456 kg] |
| Lift to full height (at 800mm): | 3511 lbs [1592 kg] |
| Lift to 1.5m (at pin): | 4301 lbs [1950 kg] |
| Lift to 1.5m (at 800mm): | 4143 lbs [1879 kg] |