John Deere 5065M Specifications - John Deere 5065M Specs

info
-10oF [-23oC]↑: : JDM J20C
10o↔104oF [-12o↔40oC]: : BIO HY-GARD JDM 20D
Production
Manufacturer: John Deere
Factory: Augusta, Georgia, USA
Original price (USD): $35,603 (2009 2WD ROPS), $46,272 (2009 4WD cab)
Capacity
Fuel: 21 gal [79.5 L] (ROPS), 30 gal [113.6 L] (cab)
Hydraulic system: 11.9 gal [45.0 L]
Front hubs: 0.84 qts [0.8 L] (each)
Front diff.: 5.3 qts [5.0 L]
3-Point Hitch
Rear Type: II/I
Rear lift (at 24"/610mm): 3,595 lbs [1630 kg], 4,498 lbs [2040 kg] (optional)
Power Take-off (PTO)
Rear PTO: independent electrohydraulic
Rear RPM: 540 (2WD), 540/540E (4WD), 540/540E/1000 (optional)
Dimensions & Tires
Wheelbase: 85.6 inches [217 cm]
Weight: 6017 to 7800 pounds
Front tire: 7.5-16
Rear tire: 16.9-30
5065M Serial Numbers
Location: Tractor frame on front left side.
- Serial numbers unknown -
John Deere 5065M Power
Engine: 65 hp [48.5 kW]
PTO (claimed): 50 hp [37.3 kW]
PTO (tested): 56.90 hp [42.4 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Final drives: inboard planetary
Differential lock: shift-on-the-move electro-hydraulic rear differential lock
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Two-post foldable ROPS. Optional deluxe ROPS with upgraded seat. Optional cab with heat and air conditioning.
Hydraulics
Type: open center
Capacity: 11.9 gal [45.0 L]
Pressure: 2828 psi [195.0 bar]
Valves: 0, 2 or 3 (rear), 0, 2 or 3 (mid)
Pump flow: 14.6 gpm [55.3 lpm]
Steering flow: 6.3 gpm [23.8 lpm]
Steering press.: 1922 psi [132.5 bar]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 70 (ROPS), 90 (cab), 120 (optional)
Battery
Number: 1
Cold-cranking amps: 750
Volts: 12
Group: 31
info
Bore/Stroke: 3.385x4.134 inches [86 x 105 mm]
Power: 65 hp [48.5 kW]
Air cleaner: dry
Rated RPM: 2200
Torque: 270 lb-ft [366.1 Nm]
Torque RPM: 1400
Starter volts: 12
Oil capacity: 10.4 qts [9.8 L]
Coolant capacity: 10.4 qts [9.8 L]
Engine Detail
John Deere PowerTech 030, turbocharged diesel, 5-cylinder, liquid-cooled, 186 ci [3.0 L]
info
Speeds: With 16.9-30 rear tires.
Transmission
Transmission: SyncReverser
Type: partially synchronized
Gears: 16 forward and reverse
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Synchronized shuttle shift with reverser lever, or speed change with speed shift lever, while moving using the clutch. Tractor must be stopped to change ranges.
info
Previous model: John Deere 5225
Series next: John Deere 5075M
Dimensions
Weight (operating): 6,017 lbs [2729 kg] (2WD ROPS), 6,300 lbs [2857 kg] (2WD deluxe ROPS), 7,400 lbs [3356 kg] (2WD cab), 6,400 lbs [2903 kg] (4WD ROPS), 6,700 lbs [3039 kg] (4WD deluxe ROPS), 7,800 lbs [3538 kg] (4WD cab)
Wheelbase: 85.6 inches [217 cm]
Ground clearance: 18.8 inches [47 cm] (front axle)
Front tread: 57.6 to 82.6 inches (2WD) [146 to 209 cm] (2WD) 52.8 to 75 inches (4WD) [134 to 190 cm] (4WD)
Rear tread: 53.1 to 80.9 inches [134 to 205 cm]
2WD turn radius: 12.8 feet [3.9 m], 11.2 feet [3.4 m] (with brakes)
4WD turn radius: 11.4 feet [3.5 m], 10.4 feet [3.2 m] (with brakes)
John Deere 5065M Tires
Ag front: 11L-15 (2WD), 9.5-24 (4WD), 12.4R24 (4WD), 13.6R24 (4WD)
Ag rear: 14.9-28, 16.9-28, 420/90R30, 480/80R30, 15.5R38, 16.9R34, 230/95R48
Lawn/turf front: 27/12LL-15 (2WD), 12LL-16 (4WD), 44x18-20 (4WD), 230/95R32 (4WD)
Lawn/turf rear: 22.5LL-16.1, 23.1-26
Industrial front: 11LL-15 (2WD), 12.5/80-18 (4WD)
Industrial rear: 19.5L24, 16.9-24
info
Previous model: John Deere 5225
Series next: John Deere 5075M
Loader
Loader type: John Deere 563
Height (to pin): 133 inches [337 cm]
Clearance, dumped bucket: 97 inches [246 cm]
Dump reach: 50 inches [127 cm]
Dump angle: 72
Reach at ground: 88 inches [223 cm]
Rollback angle: 44
Breakout force (at pin): 6,654 lbs [3018 kg]
MSL Breakout force (at pin): 5,665 lbs [2569 kg]
Lift to full height (at pin): 3,982 lbs [1806 kg]
MSL Lift to full height (at pin): 3,121 lbs [1415 kg]