FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Series: | → 5075E |
| Production | |
| Manufacturer: | John Deere |
| Type: | Utility tractor |
| Factory: | Pune, Maharashtra, India |
| John Deere 5065E Power | |
| Engine (gross): | 65 hp 48.5 kW |
| PTO (claimed): | 53 hp 39.5 kW |
| PTO (tested): | 57.96 hp 43.2 kW |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Final drives: | planetary |
| Differential lock: | rear diff lock standard |
| Steering: | hydrostatic power |
| Brakes: | hydraulic wet disc |
| Cab: | Folding 2-post ROPS. Optional canopy. Optional deluxe canopy with lights and insulation. |
| Transmissions: | 9-speed, 9-speed partially synchronized |
| Capacity | |
| Fuel: | 18 gal 68.1 L |
| 2WD Hydraulic system: | 10 gal 37.9 L |
| 4WD Hydraulic system: | 10.3 gal 39.0 L |
| Front axle: | 4.8 qts 4.5 L |
| Front hubs: | 0.85 qts 0.8 L (each) |
| Hydraulics | |
| Type: | open center |
| 2WD Capacity: | 10 gal 37.9 L |
| 4WD Capacity: | 10.3 gal 39.0 L |
| Pressure: | 2828 psi 195.0 bar |
| Rear valves: | 1 or 2 |
| Mid valves: | 2 (optional) |
| Pump flow: | 11.4 gpm 43.1 lpm |
| Total flow: | 18.2 gpm 68.9 lpm |
| Steering flow: | 6.8 gpm 25.7 lpm |
| Steering press.: | 1958 psi 135.0 bar |
| Tractor hitch | |
| Rear Type: | 2 |
| Control: | position and top-link draft control |
| Rear lift (at 24"/610mm): | 3,192 lbs 1447 kg |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | mechanical |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| Wheelbase: | 80.7 inches 204 cm |
| Weight: | 4634 to 5500 pounds |
| Front tire: | 7.5-16 |
| Rear tire: | 16.9-27 (2WD) |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery CCA: | 623 |
| Battery volts: | 12 |
| info | |
| Series: | → 5075E |
| Engine Detail | |
| John Deere PowerTech 3029H, turbocharged diesel, 3-cylinder, liquid-cooled | |
| Displacement: | 179 ci 2.9 L |
| Bore/Stroke: | 4.19x4.33 inches 106 x 110 mm |
| Rated Power (EC 97/98): | 65 hp 48.5 kW |
| Air cleaner: | two paper elements |
| Pre-heating: | coolant heater (optional), heavy-duty air pre-heater (optional) |
| Rated RPM: | 2400 |
| Idle RPM: | 800-2600 |
| Operating RPM: | 1800-2400 |
| Torque: | 177 lb-ft 240.0 Nm |
| Torque RPM: | 1700 |
| Firing order: | 1-2-3 |
| Starter volts: | 12 |
| Coolant capacity: | 10 qts 9.5 L |
| Intake valve clearance: | 0.014 inches 0.356 mm |
| Exhaust valve clearance: | 0.018 inches 0.457 mm |
| Engine Oil | |
| Oil capacity: | 9 qts 8.5 L |
| Oil change: | 100 h |
| info | |
| JD Hy-Gard |
| Transmissions overview | |
| 9-speed, 9-speed partially synchronized |
| Transmission | |
| Transmission: | SyncShuttle |
| Type: | partially synchronized |
| Gears: | 9 forward and 3 reverse |
| Clutch: | dry disc |
| Oil capacity: | 41.2 qts 39.0 L |
| Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Forward gear shifts in-range are synchronized. Shifts between ranges are not synchronized. The SyncShuttle is standard equipment on four-wheel drive models. | |
| Speeds | |
| With 16.9-28 rear tires., |
| info | |
| Series: | → 5075E |
| John Deere 5065E Tires | |
| Standard tires (ag): | Front: 7.5-16. Rear: 16.9-27 (2WD), Front: 9.5-24. Rear: 16.9-28 (4WD) |
| Lawn/turf front: | 27/12LL-15 (2WD), 9.5-16 (4WD) |
| Lawn/turf rear: | 21.5L-16.1 |
| Industrial front: | 11L-15 (2WD), 12.5-80-18 (4WD) |
| Industrial rear: | 16.9-24 |
| Dimensions | |
| Wheelbase: | 80.7 inches 204 cm |
| Length: | 137.8 inches 350 cm |
| Width: | 57.3 inches 145 cm (axle flange) |
| 2WD Clearance (front axle): | 18.8 inches 47 cm |
| 4WD Clearance (front axle): | 13.4 inches 34 cm |
| Front axle: | Flange |
| John Deere 5065E Weight | |
| 2WD Shipping: | 4,634 lbs 2101 kg |
| 4WD Shipping: | 5,070 lbs 2299 kg |
| 4WD Operating: | 5,500 lbs 2494 kg |
| John Deere 5065E Height | |
| Hood: | 53.8 inches 136 cm |
| ROPS: | 96.8 inches 245 cm, 78.5 inches 199 cm (folded) |
| info | |
| Series: | → 5075E |
| John Deere 512 Loader | |
| Height (to pin): | 114 inches 289 cm |
| Clearance, dumped bucket: | 85 inches 215 cm |
| Dump reach: | 26 inches 66 cm |
| Dump angle: | 57° |
| Reach at ground: | 68 inches 172 cm |
| Rollback at ground: | 23° |
| Breakout force (at pin): | 4,775 lbs 2165 kg |
| Breakout force (at 800mm): | 3,250 lbs 1474 kg |
| Lift to full height (at pin): | 2,453 lbs 1112 kg |
| Lift to full height (at 800mm): | 1,580 lbs 716 kg |
| Lift to 1.5m (at pin): | 3,236 lbs 1467 kg |
| Lift to 1.5m (at 800mm): | 2,343 lbs 1062 kg |
| Bucket width: | 73 inches 185 cm |
| John Deere 553 Loader | |
| Height (to pin): | 122 inches 309 cm |
| Clearance, dumped bucket: | 94 inches 238 cm |
| Dump reach: | 35 inches 88 cm |
| Dump angle: | 41° |
| Reach at ground: | 74 inches 187 cm |
| Rollback at ground: | 33° |
| Breakout force (at pin): | 5,378 lbs 2439 kg |
| Breakout force (at 800mm): | 3,604 lbs 1634 kg |
| Lift to full height (at pin): | 3,133 lbs 1421 kg |
| Lift to full height (at 800mm): | 1,956 lbs 887 kg |
| Lift to 1.5m (at pin): | 4,008 lbs 1818 kg |
| Lift to 1.5m (at 800mm): | 2,891 lbs 1311 kg |
| Bucket width: | 72 inches 182 cm |