FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1988 - 1992 4055 Series, Row-Crop tractor | |
| Previous model: | John Deere 4850 |
| Next model: | John Deere 4960 |
| Series back: | John Deere 4755 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Waterloo, Iowa, USA |
| Capacity | |
| Fuel: | 102 gal [386.1 L] |
| PowerShift Hydraulic system: | 18.5 gal [70.0 L] |
| PS MFWD Hydraulic system: | 20 gal [75.7 L] |
| QuadRange Hydraulic system: | 26.9 gal [101.8 L] |
| 3-Point Hitch | |
| Rear Type: | III |
| Rear lift: | 7486 lbs [3395 kg] *Advertised as 9710 pounds, the tractor was only able to lift 5504 during testing., 8274 lbs [3753 kg] *With optional assist cylinder. Advertised as 10560 pounds, but actual tested lift was 7281 pounds. |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | hydraulic |
| Rear RPM: | 1000 (1.75) |
| Dimensions & Tires | |
| 2WD Wheelbase: | 118.5 inches [300 cm] |
| 4WD Wheelbase: | 117.1 inches [297 cm] |
| Weight: | 18370 to 24665 pounds |
| 4955 Serial Numbers | |
| Location: | Serial number plate on the rear of the 4955, above the PTO shaft. |
| John Deere 4955 Power | |
| PTO (claimed): | 200 hp [149.1 kW] |
| Drawbar (tested): | 176.48 hp [131.6 kW] |
| PTO (tested): | 210.00 hp [156.6 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Final drives: | inboard planetary |
| Steering: | power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Sound Gard cab standard. |
| Hydraulics | |
| Type: | closed center |
| PowerShift Capacity: | 18.5 gal [70.0 L] |
| PS MFWD Capacity: | 20 gal [75.7 L] |
| QuadRange Capacity: | 26.9 gal [101.8 L] |
| Pressure: | 2530 psi [174.4 bar] |
| Valves: | 2 or 3 |
| Pump flow: | 29.5 gpm [111.7 lpm] |
| SCV flow: | 20.6 gpm [78.0 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 120 |
| Battery | |
| Number: | 2 |
| Cold-cranking amps: | 925 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.5625x4.75 inches [116 x 121 mm] |
| Air cleaner: | dry |
| Compression: | 16:1 |
| Rated RPM: | 2200 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 22 qts [20.8 L] |
| Coolant capacity: | 32 qts [30.3 L] |
| Intake valve clearance: | 0.015 inches [0.381 mm] |
| Exhaust valve clearance: | 0.020 inches [0.508 mm] |
| Engine Detail | |
| John Deere, turbocharged diesel, 6-cylinder, liquid-cooled inline, 466 ci [7.6 L] |
| info | |
| Previous model: | John Deere 4850 |
| Next model: | John Deere 4960 |
| Series back: | John Deere 4755 |
| Transmission | |
| Transmission: | John Deere Power Shift |
| Type: | full power shift |
| Gears: | 15 forward and 4 reverse |
| Clutch: | hydraulic wet disc |
| info | |
| Previous model: | John Deere 4850 |
| Next model: | John Deere 4960 |
| Series back: | John Deere 4755 |
| Dimensions | |
| Weight (operating): | 18,370 lbs [8332 kg] (20.8R42 duals) |
| Weight (ballasted): | 24,665 lbs [11188 kg] |
| 2WD Wheelbase: | 118.5 inches [300 cm] |
| 4WD Wheelbase: | 117.1 inches [297 cm] |
| Width: | 118 inches [299 cm] *Minimum width with standard axle. |
| Height (cab): | 118.8 inches [301 cm] |
| Rear axle: | Rack-and-pinion: 3.94 by 118 inches [100x2997 mm] Rack-and-pinion: 3.94 by 108 inches [100x2743 mm] |
| info | |
| Previous model: | John Deere 4850 |
| Next model: | John Deere 4960 |
| Series back: | John Deere 4755 |
| Loader | |
| Loader type: | John Deere 840 |
| Clearance, dumped bucket: | 149 inches [378 cm] |
| Dump angle: | 60 |
| Rollback angle: | 40 |
| Bucket width: | 96.5 inches [245 cm] |