FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2003 - 2004 4000 Ten Compact Series, Compact Utility tractor | |
| Previous model: | John Deere 4700 |
| Next model: | John Deere 4520 |
| Series back: | John Deere 4610 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Capacity | |
| Fuel: | 12.5 gal [47.3 L] |
| Hydraulic system: | 9.7 gal [36.7 L], 9.2 gal [34.8 L] (hydrostatic) |
| Front axle: | 5.2 qts [4.9 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Rear lift: | 2,500 lbs [1134 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Mid PTO: | optional |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 71.5 inches [181 cm] |
| Weight: | 3,450 lbs [1564 kg] |
| Front tire: | 6.00-16 |
| Rear tire: | 13.6-24 |
| 4710 Serial Numbers | |
| Location: | Serial number plate on the right side of the tractor frame, above the front axle. |
| John Deere 4710 Power | |
| Engine (gross): | 46.3 hp [34.5 kW] |
| Hydro PTO (claimed): | 38.5 hp [28.7 kW] |
| Gear PTO (claimed): | 40 hp [29.8 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Platform with ROPS. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 9.7 gal [36.7 L], 9.2 gal [34.8 L] (hydrostatic) |
| Pressure: | 2500 psi [172.4 bar] |
| Pump flow: | 10.6 gpm [40.1 lpm] |
| Total flow: | 15.9 gpm [60.2 lpm] |
| Steering flow: | 5.3 gpm [20.1 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 690 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.456x3.543 inches [88 x 90 mm] |
| Power (gross): | 46.3 hp [34.5 kW] |
| Air cleaner: | dry with safety element |
| Compression: | 18:1 |
| Rated RPM: | 2600 |
| Torque: | 108 lb-ft [146.4 Nm] |
| Torque RPM: | 1700 |
| Starter volts: | 12 |
| Starter power: | 2.7 hp [2.0 kW] |
| Oil capacity: | 5.1 qts [4.8 L] |
| Coolant capacity: | 6.8 qts [6.4 L] |
| Engine Detail | |
| Yanmar 4TNE88, diesel, 4-cylinder, liquid-cooled, 133 ci [2.2 L] |
| info | |
| Speeds: | With 13.6-28 rear tires. |
| Transmission | |
| Transmission: | PowrReverser |
| Type: | power shuttle |
| Gears: | 12 forward and reverse |
| Oil capacity: | 38.8 qts [36.7 L] |
| The PowrReverser is operated with a range shift lever, gear shift lever, and reverser lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts may be made while in motion using the clutch. A clutchless power shift can be made between forward and reverse using the reverser lever. | |
| info | |
| Previous model: | John Deere 4700 |
| Next model: | John Deere 4520 |
| Series back: | John Deere 4610 |
| Dimensions | |
| Weight (shipping): | 3,450 lbs [1564 kg] |
| Wheelbase: | 71.5 inches [181 cm] |
| Length: | 135 inches [342 cm] |
| Width: | 62 inches [157 cm] *Minimum width. |
| Height (hood): | 51 inches [129 cm] |
| Height (ROPS): | 91.6 inches [232 cm], 97.6 inches [247 cm] (folding) |
| John Deere 4710 Tires | |
| Ag front: | 6.00-16 (2WD), 6.50-16 (2WD), 7.00-16 (4WD), 8.00-16 (4WD) |
| Ag rear: | 13.6-24, 13.6-28, 16.9-24 |
| Lawn/turf front: | 27x10.5-15, 27x12LL-15 (4WD) |
| Lawn/turf rear: | 44x18.00-20, 22.5LL-16.1 |
| Industrial front: | 10.00-16.5 (4WD) |
| Industrial rear: | 17.5L-24 |
| info | |
| Previous model: | John Deere 4700 |
| Next model: | John Deere 4520 |
| Series back: | John Deere 4610 |
| 72" Mower deck | |
| Type: | mid-mount John Deere, 3-blade |
| Cutting width: | 72 inches [182 cm] |
| Loader | |
| Loader type: | John Deere 460 |
| Height (to pin): | 112 inches [284 cm] |
| Clearance, dumped bucket: | 89 inches [226 cm] |
| Dump reach: | 27 inches [68 cm] |
| Dump angle: | 45 |
| Reach at ground: | 62 inches [157 cm] |
| Rollback angle: | 30 |
| Breakout force (at pin): | 3863 lbs [1752 kg] |
| Breakout force (at 500mm): | 2929 lbs [1328 kg] |
| Lift to full height (at pin): | 2330 lbs [1056 kg] |
| Lift to full height (at 500mm): | 1705 lbs [773 kg] |
| Raise time to height: | 4.8 s |
| Bucket dump time: | 2.2 s |
| Lowering time: | 3.3 s |
| Rollback time: | 2.5 s |