FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2000 - 2003 4000 Compact Series, Compact Utility tractor | |
| Next model: | John Deere 4710 |
| Series back: | John Deere 4600 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Original price (USD): | $26,500 (2003) |
| Capacity | |
| Fuel: | 12.5 gal [47.3 L] |
| Hydraulic system: | 6.8 gal [25.7 L] (gear), 8.8 gal [33.3 L] (hydro) |
| Front axle: | 8.4 qts [7.9 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Rear lift (at 24"/610mm): | 2,500 lbs [1134 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Mid PTO: | independent |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Weight: | 3,600 lbs [1632 kg] |
| 4700 Serial Numbers | |
| Location: | Serial number plate on front-right tractor frame, above front wheel. |
| John Deere 4700 Power | |
| Engine (gross): | 48 hp [35.8 kW] |
| Engine (net): | 45 hp [33.6 kW] |
| Gear PTO (claimed): | 41.5 hp [30.9 kW] |
| Hydro PTO (claimed): | 40 hp [29.8 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | wet disc |
| Hydraulics | |
| Type: | open center |
| Capacity: | 6.8 gal [25.7 L] (gear), 8.8 gal [33.3 L] (hydro) |
| Pressure: | 2500 psi [172.4 bar] |
| Valves: | 3 optional |
| Pump flow: | 9.9 gpm [37.5 lpm] |
| Total flow: | 14.7 gpm [55.6 lpm] |
| Steering flow: | 4.8 gpm [18.2 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 650 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.465x3.543 inches [88 x 90 mm] |
| Power (gross): | 48 hp [35.8 kW] |
| Fuel system: | direct injection |
| Air cleaner: | dry type |
| Pre-heating: | air heater |
| Compression: | 18:1 |
| Rated RPM: | 2600 |
| Torque: | 108 lb-ft [146.4 Nm] |
| Torque RPM: | 1700 |
| Starter volts: | 12 |
| Starter power: | 2.7 hp [2.0 kW] |
| Oil capacity: | 5.1 qts [4.8 L] |
| Coolant capacity: | 7.6 qts [7.2 L] |
| Engine Detail | |
| Yanmar 4TNE88, diesel, 4-cylinder, liquid-cooled, 134 ci [2.2 L] |
| info | |
| Speeds: | With 13.6-28 rear tries. |
| Transmission | |
| Transmission: | PowrReverser |
| Type: | partially synhcronized power shuttle |
| Gears: | 12 forward and reverse |
| Clutch: | wet disc, two clutch packs with three 5-inch discs each |
| Oil capacity: | 27.2 qts [25.7 L] |
| Four speeds (1-4) in three ranges (A-C) with left-hand reverser on dash. Power shuttle allows direction changes without using the clutch. Speeds are synchronized and may be shifting on the move, using the clutch. Tractor must be stopped to shift ranges. | |
| info | |
| Next model: | John Deere 4710 |
| Series back: | John Deere 4600 |
| Dimensions | |
| Weight: | 3,600 lbs [1632 kg] |
| Drawbar capacity: | 570 lbs [258 kg] |
| Front axle load: | 992 lbs [449 kg] |
| Rear axle load: | 1,984 lbs [899 kg] |
| Length: | 135 inches [342 cm] |
| Height (hood): | 49.2 inches [124 cm] (2WD), 51 inches [129 cm] (4WD) |
| Height (ROPS): | 88.4 inches [224 cm] (2WD fixed), 91.6 inches [232 cm] (4WD fixed), 94.4 inches [239 cm] (2WD folding), 97.6 inches [247 cm] (4WD folding) |
| info | |
| Next model: | John Deere 4710 |
| Series back: | John Deere 4600 |
| 72" Mower deck | |
| Type: | mid-mount John Deere |
| Cutting width: | 72 inches [182 cm] |
| Loader | |
| Loader type: | John Deere 460 |
| Height (to pin): | 111.9 inches [284 cm] |
| Clearance, dumped bucket: | 88.8 inches [225 cm] |
| Dump reach: | 26.9 inches [68 cm] |
| Dump angle: | 45 |
| Reach at ground: | 61.8 inches [156 cm] |
| Rollback angle: | 30 |
| Breakout force (at 800mm): | 3,863 lbs [1752 kg] |
| Lift to full height (at 800mm): | 2,325 lbs [1054 kg] |
| Raise time to height: | 4.8 s |
| Bucket dump time: | 2.2 s |
| Lowering time: | 3.3 s |
| Rollback time: | 2.5 s |
| Backhoe | |
| Backhoe type: | John Deere 48 |