FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1978 - 1982 Iron Horses Series, Row-Crop tractor | |
Next model: | John Deere 4650 |
Series next: | John Deere 4840 |
Series back: | John Deere 4440 |
Production | |
Manufacturer: | John Deere |
Factory: | Waterloo, Iowa, USA |
Original price (USD), $51.500 (1982 ), |
Capacity | |
Fuel: | 83 gal [314.2 L] |
Hydraulic system: | 16.5 gal [62.5 L] |
3-Point Hitch | |
Rear Type: | III/IIIN |
Rear lift: | 7328 lbs [3323 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 1000 (1.75) |
Dimensions & Tires | |
Wheelbase: | 118.5 inches [300 cm] |
Weight: | 14350 to 15700 pounds |
Front tire: | 11.00-16 |
Rear tire: | 18.4-38 |
4640 Serial Numbers | |
Location: | Rear of transmission case |
John Deere 4640 Power | |
PTO (claimed): | 155 hp [115.6 kW] |
Drawbar (tested): | 132.44 hp [98.8 kW] |
PTO (tested): | 156.30 hp [116.6 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 HFWD 4WD |
Differential lock: | pedal-actuated hydraulic |
Steering: | hydrostatic power |
Brakes: | differential hydraulic wet disc |
Cab: | Sound-Gard cab standard. |
Hydraulics | |
Type: | closed center |
Capacity: | 16.5 gal [62.5 L] |
Valves: | 2 or 3 |
Pump flow: | 23 gpm [87.1 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Battery | |
Number: | 2 |
Volts: | 6 |
info | |
Bore/Stroke: | 4.5625x4.75 inches [116 x 121 mm] |
Pre-heating: | ether |
Compression: | 15.5:1 |
Rated RPM: | 2200 |
Idle RPM: | 800-2400 |
Operating RPM: | 1500-2200 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Oil capacity: | 20 qts [18.9 L] |
Coolant capacity: | 38 qts [36.0 L] |
Engine Detail | |
John Deere, turbocharged intercooled diesel, 6-cylinder, liquid-cooled, 466 ci [7.6 L] |
info | |
Next model: | John Deere 4650 |
Series next: | John Deere 4840 |
Series back: | John Deere 4440 |
Transmission | |
Transmission: | John Deere Quad-Range |
Type: | partial power shift |
Gears: | 16 forward and 6 reverse |
Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided hy a hydraulically-controlled planetary that provides an under-drive to each gear. |
info | |
Next model: | John Deere 4650 |
Series next: | John Deere 4840 |
Series back: | John Deere 4440 |
Dimensions | |
Weight (shipping): | 14350 lbs [6509 kg] |
Weight (operating): | 15700 lbs [7121 kg] (duals) |
Weight (ballasted): | 18585 lbs [8430 kg] |
Wheelbase: | 118.5 inches [300 cm] |
Length: | 171 inches [434 cm] |
Width: | 96 inches [243 cm], 108 inches [274 cm] (long axle), 118 inches [299 cm] (long axle) |
Height (cab): | 117 inches [297 cm] |
Ground clearance: | 14.9 inches [37 cm] |
Clearance (front axle): | 26 inches [66 cm] |
Clearance (rear axle): | 28 inches [71 cm] |
Rear axle: | Rack-and-pinion: 3.937 by 96 inches [99x2438 mm] Rack-and-pinion: 3.937 by 108 inches [99x2743 mm] Rack-and-pinion: 3.937 by 118 inches [99x2997 mm] |
Front tread: | 58 to 100 inches [147 to 254 cm] |
Rear tread: | 60 to 131.5 inches [152 to 334 cm] |
2WD turn radius: | 14.7 feet [4.5 m], 13.4 feet [4.1 m] (with brakes) |
John Deere 4640 Tires | |
Ag front: | 10.00-16, 14L-16.1, 16.5L-16.1, 9.50-20 |
Ag rear: | 24.5-32, 30.5-32, 20.8-38, 18.4-42 |
info | |
Next model: | John Deere 4650 |
Series next: | John Deere 4840 |
Series back: | John Deere 4440 |
Loader | |
Loader type: | John Deere 168 |
Weight: | 1871 lbs [848 kg] |
Height (to pin): | 151 inches [383 cm] |
Clearance, dumped bucket: | 132 inches [335 cm] |
Dump reach: | 32 inches [81 cm] |
Dump angle: | 37 |
Clearance, level bucket: | 151 inches [383 cm] |
Rollback angle: | 12 |
Breakout force (lift): | 5000 lbs [2268 kg] |
Lift to full height (at pin): | 3800 lbs [1723 kg] |
Bucket capacity: | 0.9 cu yd [0.7 cu m] |
Bucket width: | 96 inches [243 cm] |