John Deere 4610 Specifications - John Deere 4610 Specs

info
2003 - 2004 4000 Ten Compact Series, Compact Utility tractor
Previous model: John Deere 4600
Next model: John Deere 4320
Series next: John Deere 4710
Series back: John Deere 4510
Production
Manufacturer: John Deere
Factory: Augusta, Georgia, USA
Original price (USD), $25,100 (2004 ),
Capacity
Fuel: 12.5 gal [47.3 L]
Hydraulic system: 9.7 gal [36.7 L], 9.2 gal [34.8 L] (hydrostatic)
Front axle: 5.2 qts [4.9 L]
3-Point Hitch
Rear Type: I
Rear lift: 2,500 lbs [1134 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540
Mid PTO: optional
Mid RPM: 2100
Dimensions & Tires
Wheelbase: 71.5 inches [181 cm]
Weight: 3450 lbs [1564 kg]
Front tire: 6.00-16
4610 Serial Numbers
Location: Serial number plate on the right side of the tractor frame, above the front axle.
- Serial numbers unknown -
John Deere 4610 Power
Engine (gross): 42.8 hp [31.9 kW]
Hydro PTO (claimed): 33.5 hp [25.0 kW]
Gear PTO (claimed): 37 hp [27.6 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Steering: power
Brakes: wet disc
Cab: Platform with ROPS.
Hydraulics
Type: open center
Capacity: 9.7 gal [36.7 L], 9.2 gal [34.8 L] (hydrostatic)
Pressure: 2500 psi [172.4 bar]
Pump flow: 10.6 gpm [40.1 lpm]
Total flow: 15.9 gpm [60.2 lpm]
Steering flow: 5.3 gpm [20.1 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 40
Battery
Number: 1
Cold-cranking amps: 690
Volts: 12
info
Bore/Stroke: 3.307x3.543 inches [84 x 90 mm]
Power (gross): 42.8 hp [31.9 kW]
Air cleaner: dry with safety element
Compression: 18:1
Rated RPM: 2600
Torque: 95 lb-ft [128.8 Nm]
Torque RPM: 1700
Starter volts: 12
Starter power: 2.7 hp [2.0 kW]
Oil capacity: 5.1 qts [4.8 L]
Coolant capacity: 6.8 qts [6.4 L]
Engine Detail
Yanmar 4TNE84, diesel, 4-cylinder, liquid-cooled, 122 ci [2.0 L]
info
Speeds: With 13.6-28 rear tires.
Transmission
Transmission: SyncShift
Type: partially synchronized
Gears: 9 forward and 3 reverse
Oil capacity: 38.8 qts [36.7 L]
The SyncShift transmission is operated via a gear shift lever and range shift lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts, within a range, may be made on the move using the clutch.
info
Previous model: John Deere 4600
Next model: John Deere 4320
Series next: John Deere 4710
Series back: John Deere 4510
Dimensions
Weight (shipping): 3450 lbs [1564 kg]
Wheelbase: 71.5 inches [181 cm]
Length: 135 inches [342 cm]
Width: 62 inches [157 cm] *Minimum
Height (hood): 51 inches [129 cm]
Height (ROPS): 91.6 inches [232 cm], 97.6 inches [247 cm] (folding)
John Deere 4610 Tires
Ag front: 6.00-16 (2WD), 6.50-16 (2WD), 8.00-16 (4WD), 7.00-16 (4WD)
Lawn/turf front: 27x10.5-15, 27x12LL-15 (4WD)
Lawn/turf rear: 44x18.00-20, 22.5LL-16.1
Industrial front: 10.00-16.5 (4WD)
Industrial rear: 17.5L-24
info
Previous model: John Deere 4600
Next model: John Deere 4320
Series next: John Deere 4710
Series back: John Deere 4510
72" Mower deck
Type: mid-mount John Deere, 3-blade
Cutting width: 72 inches [182 cm]
Loader
Loader type: John Deere 460
Height (to pin): 112 inches [284 cm]
Clearance, dumped bucket: 89 inches [226 cm]
Dump reach: 27 inches [68 cm]
Dump angle: 45
Reach at ground: 62 inches [157 cm]
Rollback angle: 30
Breakout force (at pin): 3863 lbs [1752 kg]
Breakout force (at 500mm): 2929 lbs [1328 kg]
Lift to full height (at pin): 2330 lbs [1056 kg]
Lift to full height (at 500mm): 1705 lbs [773 kg]
Raise time to height: 4.8 s
Bucket dump time: 2.2 s
Lowering time: 3.3 s
Rollback time: 2.5 s