FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1999 - 2003 4000 Compact Series, Compact Utility tractor | |
| Previous model: | John Deere 1070 |
| Next model: | John Deere 4610 |
| Series next: | John Deere 4700 |
| Series back: | John Deere 4500 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Original price (USD): | $25,100 (2003) |
| Capacity | |
| Fuel: | 12.5 gal [47.3 L] |
| Hydraulic system: | 6.8 gal [25.7 L] (gear), 8.8 gal [33.3 L] (hydro) |
| Front axle: | 8.4 qts [7.9 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Rear lift (at 24"/610mm): | 2,500 lbs [1134 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Mid PTO: | independent |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Weight: | 3,450 lbs [1564 kg] |
| 4600 Serial Numbers | |
| Location: | Serial number plate on front-right tractor frame, above front wheel. |
| John Deere 4600 Power | |
| Engine (gross): | 43 hp [32.1 kW] |
| Engine (net): | 41 hp [30.6 kW] |
| PTO (claimed): | 36 hp [26.8 kW] (gear), 34.5 hp [25.7 kW] (hydro) |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | wet disc |
| Hydraulics | |
| Type: | open center |
| Capacity: | 6.8 gal [25.7 L] (gear), 8.8 gal [33.3 L] (hydro) |
| Pressure: | 2500 psi [172.4 bar] |
| Valves: | 3 optional |
| Pump flow: | 9.9 gpm [37.5 lpm] |
| Total flow: | 14.7 gpm [55.6 lpm] |
| Steering flow: | 4.8 gpm [18.2 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 650 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.307x3.543 inches [84 x 90 mm] |
| Power (gross): | 43 hp [32.1 kW] |
| Fuel system: | direct injection |
| Air cleaner: | dry |
| Pre-heating: | air heater |
| Compression: | 18:1 |
| Rated RPM: | 2600 |
| Torque: | 98 lb-ft [132.9 Nm] |
| Torque RPM: | 1700 |
| Starter volts: | 12 |
| Starter power: | 2.7 hp [2.0 kW] |
| Oil capacity: | 5.1 qts [4.8 L] |
| Coolant capacity: | 7.6 qts [7.2 L] |
| Engine Detail | |
| Yanmar 4TNE84, diesel, 4-cylinder, liquid-cooled, 121 ci [2.0 L] |
| info | |
| Speeds: | With 13.6-28 rear tries. |
| Transmission | |
| Transmission: | Collar Shift |
| Type: | unsynchronized gear |
| Gears: | 9 forward and 3 reverse |
| Clutch: | dry |
| Oil capacity: | 27.2 qts [25.7 L] |
| Three speeds (1-3), plus reverse, in three ranges (A-C). Tractor must be stopped, and clutch used, to shift speeds or ranges. | |
| info | |
| Previous model: | John Deere 1070 |
| Next model: | John Deere 4610 |
| Series next: | John Deere 4700 |
| Series back: | John Deere 4500 |
| Dimensions | |
| Weight: | 3,450 lbs [1564 kg] |
| Drawbar capacity: | 570 lbs [258 kg] |
| Front axle load: | 992 lbs [449 kg] |
| Rear axle load: | 1,984 lbs [899 kg] |
| Length: | 135 inches [342 cm] |
| Height (hood): | 49.2 inches [124 cm] (2WD), 51 inches [129 cm] (4WD) |
| Height (ROPS): | 88.4 inches [224 cm] (2WD fixed), 91.6 inches [232 cm] (4WD fixed), 94.4 inches [239 cm] (2WD folding), 97.6 inches [247 cm] (4WD folding) |
| info | |
| Previous model: | John Deere 1070 |
| Next model: | John Deere 4610 |
| Series next: | John Deere 4700 |
| Series back: | John Deere 4500 |
| 72" Mower deck | |
| Type: | mid-mount John Deere |
| Cutting width: | 72 inches [182 cm] |
| Loader | |
| Loader type: | John Deere 460 |
| Height (to pin): | 111.9 inches [284 cm] |
| Clearance, dumped bucket: | 88.8 inches [225 cm] |
| Dump reach: | 26.9 inches [68 cm] |
| Dump angle: | 45 |
| Reach at ground: | 61.8 inches [156 cm] |
| Rollback angle: | 30 |
| Breakout force (at 800mm): | 3,863 lbs [1752 kg] |
| Lift to full height (at 800mm): | 2,325 lbs [1054 kg] |
| Raise time to height: | 4.8 s |
| Bucket dump time: | 2.2 s |
| Lowering time: | 3.3 s |
| Rollback time: | 2.5 s |
| Backhoe | |
| Backhoe type: | John Deere 48 |