FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2003 - 2004 4000 Ten Compact Series, Compact Utility tractor | |
Previous model: | John Deere 4500 |
Next model: | John Deere 4120 |
Series next: | John Deere 4610 |
Series back: | John Deere 4410 |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Capacity | |
Fuel: | 12.5 gal [47.3 L] |
Hydraulic system: | 9.7 gal [36.7 L] |
Front axle: | 5.2 qts [4.9 L] |
3-Point Hitch | |
Rear Type: | I |
Rear lift: | 2,500 lbs [1134 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Mid PTO: | optional |
Mid RPM: | 2100 |
Dimensions & Tires | |
Wheelbase: | 71.5 inches [181 cm] |
Weight: | 3,450 lbs [1564 kg] |
Front tire: | 6.00-16 |
Rear tire: | 13.6-24 |
4510 Serial Numbers | |
Location: | Serial number plate on the right side of the tractor frame, above the front axle. |
- Serial numbers unknown - |
John Deere 4510 Power | |
Engine (gross): | 38.4 hp [28.6 kW] |
PTO (claimed): | 33 hp [24.6 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Steering: | power |
Brakes: | wet disc |
Cab: | Platform with ROPS. |
Hydraulics | |
Type: | open center |
Capacity: | 9.7 gal [36.7 L] |
Pressure: | 2500 psi [172.4 bar] |
Pump flow: | 10.6 gpm [40.1 lpm] |
Total flow: | 15.9 gpm [60.2 lpm] |
Steering flow: | 5.3 gpm [20.1 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 690 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.307x3.543 inches [84 x 90 mm] |
Power (gross): | 38.4 hp [28.6 kW] |
Air cleaner: | dry with safety element |
Compression: | 18:1 |
Rated RPM: | 2600 |
Torque: | 92 lb-ft [124.8 Nm] |
Torque RPM: | 1700 |
Starter volts: | 12 |
Starter power: | 2.7 hp [2.0 kW] |
Oil capacity: | 5.1 qts [4.8 L] |
Coolant capacity: | 6.4 qts [6.1 L] |
Engine Detail | |
Yanmar 4TNE84, diesel, 4-cylinder, liquid-cooled, 122 ci [2.0 L] |
info | |
Speeds: | With 13.6-24 rear tires. |
Transmission | |
Transmission: | SyncShift |
Type: | partially synchronized |
Gears: | 9 forward and 3 reverse |
Oil capacity: | 38.8 qts [36.7 L] |
The SyncShift transmission is operated via a gear shift lever and range shift lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts, within a range, may be made on the move using the clutch. |
info | |
Previous model: | John Deere 4500 |
Next model: | John Deere 4120 |
Series next: | John Deere 4610 |
Series back: | John Deere 4410 |
Dimensions | |
Weight (shipping): | 3,450 lbs [1564 kg] |
Wheelbase: | 71.5 inches [181 cm] |
Length: | 135 inches [342 cm] |
Width: | 62 inches [157 cm] (min) |
Height (hood): | 51 inches [129 cm] |
Height (ROPS): | 91.6 inches [232 cm], 97.6 inches [247 cm] (folding) |
John Deere 4510 Tires | |
Ag front: | 6.00-16 (2WD), 7.00-16 (4WD), 8.00-16 (4WD) |
Ag rear: | 13.6-24, 14.9-24 |
Lawn/turf front: | 27x10.5-15, 27x12LL-15 (4WD) |
Lawn/turf rear: | 44x18.00-20, 22.5LL-16.1 |
Industrial front: | 10.00-16.5 (4WD) |
Industrial rear: | 17.5L-24 |
info | |
Previous model: | John Deere 4500 |
Next model: | John Deere 4120 |
Series next: | John Deere 4610 |
Series back: | John Deere 4410 |
72" Mower deck | |
Type: | mid-mount John Deere, 3-blade |
Cutting width: | 72 inches [182 cm] |
Loader | |
Loader type: | John Deere 460 |
Height (to pin): | 112 inches [284 cm] |
Clearance, dumped bucket: | 89 inches [226 cm] |
Dump reach: | 27 inches [68 cm] |
Dump angle: | 45 |
Reach at ground: | 62 inches [157 cm] |
Rollback angle: | 30 |
Breakout force (at pin): | 3863 lbs [1752 kg] |
Breakout force (at 500mm): | 2929 lbs [1328 kg] |
Lift to full height (at pin): | 2330 lbs [1056 kg] |
Lift to full height (at 500mm): | 1705 lbs [773 kg] |
Raise time to height: | 4.8 s |
Bucket dump time: | 2.2 s |
Lowering time: | 3.3 s |
Rollback time: | 2.5 s |