FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1998 - 2001 4000 Compact Series, Compact Utility tractor | |
Previous model: | John Deere 970 |
Next model: | John Deere 4510 |
Series next: | John Deere 4600 |
Series back: | John Deere 4400 |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Original price (USD): | $18,000 (2000) |
Capacity | |
Fuel: | 12.5 gal [47.3 L] |
Hydraulic system: | 6.8 gal [25.7 L] |
Front axle: | 8.4 qts [7.9 L] |
3-Point Hitch | |
Rear Type: | I |
Rear lift (at 24"/610mm): | 2,500 lbs [1134 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Mid PTO: | independent |
Mid RPM: | 2100 |
Dimensions & Tires | |
Wheelbase: | 71.5 inches [181 cm] |
Weight: | 3,450 lbs [1564 kg] |
Front tire: | 6.00-16 |
Rear tire: | 13.6-24 |
4500 Serial Numbers | |
Location: | Serial number plate on front-right tractor frame, above front wheel. |
John Deere 4500 Power | |
Engine (gross): | 39 hp [29.1 kW] |
Engine (net): | 37 hp [27.6 kW] |
PTO (claimed): | 33 hp [24.6 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Differential lock: | mechanical |
Steering: | power |
Brakes: | wet disc |
Cab: | Two-post ROPS. |
Hydraulics | |
Type: | open center |
Capacity: | 6.8 gal [25.7 L] |
Pressure: | 2500 psi [172.4 bar] |
Valves: | 3 optional |
Pump flow: | 9.9 gpm [37.5 lpm] |
Total flow: | 14.7 gpm [55.6 lpm] |
Steering flow: | 4.8 gpm [18.2 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 650 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.307x3.543 inches [84 x 90 mm] |
Power (gross): | 39 hp [29.1 kW] |
Fuel system: | direct injection |
Air cleaner: | dry |
Pre-heating: | air heater |
Compression: | 18:1 |
Rated RPM: | 2600 |
Torque: | 92 lb-ft [124.8 Nm] |
Torque RPM: | 1700 |
Starter volts: | 12 |
Starter power: | 2.7 hp [2.0 kW] |
Oil capacity: | 5.1 qts [4.8 L] |
Coolant capacity: | 7.2 qts [6.8 L] |
Engine Detail | |
Yanmar 4TNE84, diesel, 4-cylinder, liquid-cooled, 122 ci [2.0 L] |
info | |
Speeds: | With 14.9-24 rear tires. |
Transmission | |
Transmission: | Collar Shift |
Type: | unsynchronized gear |
Gears: | 9 forward and 3 reverse |
Clutch: | dry disc |
Oil capacity: | 27.2 qts [25.7 L] |
Three speeds (1-3), plus reverse, in three ranges (A-C). Tractor must be stopped, and clutch used, to shift speeds or ranges. |
info | |
Previous model: | John Deere 970 |
Next model: | John Deere 4510 |
Series next: | John Deere 4600 |
Series back: | John Deere 4400 |
Dimensions | |
Weight: | 3,450 lbs [1564 kg] |
Drawbar capacity: | 570 lbs [258 kg] |
Wheelbase: | 71.5 inches [181 cm] |
Length: | 135 inches [342 cm] |
Width: | 62 inches [157 cm] (R1 tires) |
Height (hood): | 51 inches [129 cm] |
Height (ROPS): | 97.6 inches [247 cm] |
John Deere 4500 Tires | |
Ag front: | 6.00-16 |
Ag rear: | 13.6-24 |
info | |
Previous model: | John Deere 970 |
Next model: | John Deere 4510 |
Series next: | John Deere 4600 |
Series back: | John Deere 4400 |
72" Mower deck | |
Type: | mid-mount John Deere |
Cutting width: | 72 inches [182 cm] |
Loader | |
Loader type: | John Deere 460 |
Height (to pin): | 111.9 inches [284 cm] |
Clearance, dumped bucket: | 88.8 inches [225 cm] |
Dump reach: | 26.9 inches [68 cm] |
Dump angle: | 45 |
Reach at ground: | 61.8 inches [156 cm] |
Rollback angle: | 30 |
Breakout force (at 800mm): | 3,863 lbs [1752 kg] |
Lift to full height (at 800mm): | 2,325 lbs [1054 kg] |
Raise time to height: | 4.8 s |
Bucket dump time: | 2.2 s |
Lowering time: | 3.3 s |
Rollback time: | 2.5 s |
Backhoe | |
Backhoe type: | John Deere 48 |