John Deere 4430 Specifications - John Deere 4430 Specs

info
Series: → 4630
Production
Manufacturer: John Deere
Type: Row-Crop tractor
Factory: Waterloo, Iowa, USA
Original price: $23,000 (1977 )
John Deere 4430 Power
Drawbar (claimed): 108.46 hp 80.9 kW
PTO (claimed): 125.88 hp 93.9 kW
Drawbar (tested): 104.99 hp 78.3 kW
PTO (tested): 125.88 hp 93.9 kW
Mechanical
Chassis: 4x2 2WD, 4x4 HFWD 4WD
Steering: power
Brakes: hydraulic wet disc
Cab: Optional Roll-Gard ROPS. Optional Sound Gard body and cab.
Transmissions: 8-speed partially synchronized, 16-speed partial power shift, 8-speed full power shift
Capacity
Fuel: 46 gal 174.1 L
Hydraulic system: 11 gal 41.6 L, 10 gal 37.9 L (Power Shift)
Hydraulics
Type: closed center
Capacity: 11 gal 41.6 L, 10 gal 37.9 L (Power Shift)
Pressure: 2250 psi 155.1 bar
Valves: 1 to 3
Pump flow: 22 gpm 83.3 lpm
Tractor hitch
Rear Type: II
Rear lift: 4550 lbs 2063 kg
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000, 1000
Engine RPM: 540@2200 1000@2200
Dimensions & Tires
Wheelbase: 106.6 inches 270 cm
Weight: 9732 to 11350 pounds
Front tire: 10.00-16
Rear tire: 18.4-38
4430 Serial Numbers
Location: Serial number plate on the rear of the John Deere 4430, right side, above the PTO shaft.
1973: 1000
1974: 17500
1975: 33050
1976: 47222
1977: 62960
Electrical
Ground: negative
Charging system: alternator
ROPS Charging amps: 37
Cab Charging amps: 55
Batteries: 2
Battery CCA: 800
Battery volts: 6
Battery Group: 5D
info
Series: → 4630
Engine Detail
John Deere, turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement: 404 ci 6.6 L
Bore/Stroke: 4.25x4.75 inches 108 x 121 mm
Fuel system: direct injection
Air cleaner: dry with secondary element
Pre-heating: ether injection
Compression: 15.5:1
Rated RPM: 2200
Idle RPM: 800-2200
Operating RPM: 1500-2200
Firing order: 1-5-3-6-2-4
Starter: Delco-Remy electric
Starter volts: 12
Coolant capacity: 30 qts 28.4 L, 32 qts 30.3 L (with heater)
Intake valve clearance: 0.018 inches 0.457 mm
Exhaust valve clearance: 0.028 inches 0.711 mm
Engine Oil
Oil capacity: 17 qts 16.1 L
Oil change: 100 h
info
Series: → 4630
Transmissions overview
8-speed partially synchronized, 16-speed partial power shift, 8-speed full power shift
Transmission
Transmission: John Deere Power Shift
Type: full power shift
Gears: 8 forward and 4 reverse
Clutch: hydraulic wet discs
Oil capacity: 40 qts 37.9 L
Speeds
With 18.4-38 rear tires.,
info
Series: → 4630
John Deere 4430 Tires
Ag front: 7.50-15
Ag rear: 20.8-34
Dimensions
Wheelbase: 106.6 inches 270 cm
Length: 160.75 inches 408 cm
Width: 89.625 inches 227 cm (axle), 70.8 inches 179 cm (fenders), 82 inches 208 cm (cab fenders)
Rear tread: 60 to 90 inches 152 to 228 cm
John Deere 4430 Weight
ROPS Shipping: 9732 lbs 4414 kg
Cab Shipping: 10762 lbs 4881 kg
Operating: 11350 lbs 5148 kg
Ballasted: 15060 lbs 6831 kg
John Deere 4430 Height
Steering wheel: 85.25 inches 216 cm
Cab: 114 inches 289 cm
ROPS Exhaust: 109.3 inches 277 cm
Cab Exhaust: 125.25 inches 318 cm
info
Series: → 4630
John Deere 148 Loader
Loader weight: 1350 lbs 612 kg
Height (to pin): 126 inches 320 cm
Clearance, dumped bucket: 102 inches 259 cm
Dump reach: 32 inches 81 cm
Dump angle: 38°
Clearance, level bucket: 121 inches 307 cm
Rollback angle: 11°
Breakout force (lift): 4700 lbs 2131 kg
Lift to full height (at pin): 3100 lbs 1406 kg
Bucket capacity: 0.5 cu yd 0.4 cu m, 0.6 cu yd 0.5 cu m, 0.8 cu yd 0.6 cu m, 0.9 cu yd 0.7 cu m
Bucket width: 60 inches 152 cm, 72 inches 182 cm, 84 inches 213 cm, 96 inches 243 cm
John Deere 158 Loader
Loader weight: 1771 lbs 803 kg
Height (to pin): 156 inches 396 cm
Clearance, dumped bucket: 132 inches 335 cm
Dump reach: 32 inches 81 cm
Dump angle: 37°
Clearance, level bucket: 151 inches 383 cm
Rollback angle: 12°
Breakout force (lift): 5000 lbs 2268 kg
Lift to full height (at pin): 3800 lbs 1723 kg
Bucket capacity: 0.5 cu yd 0.4 cu m, 0.6 cu yd 0.5 cu m, 0.8 cu yd 0.6 cu m, 0.9 cu yd 0.7 cu m
Bucket width: 60 inches 152 cm, 72 inches 182 cm, 84 inches 213 cm, 96 inches 243 cm