FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2002 - 2004 4000 Ten Compact Series, Compact Utility tractor | |
| Previous model: | John Deere 4300 |
| Series next: | John Deere 4410 |
| Series back: | John Deere 4210 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Capacity | |
| Fuel: | 10 gal [37.9 L] |
| Hydraulic system: | 6.3 gal [23.8 L] (gear), 6.8 gal [25.7 L] (hydro) |
| Front axle: | 4.7 qts [4.4 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Rear lift (at 24"/610mm): | 2,200 lbs [997 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Mid PTO: | optional |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 68 inches [172 cm] |
| Weight: | 2600 to 2900 pounds |
| Front tire: | 5.00-15 |
| Rear tire: | 11.2-24 |
| 4310 Serial Numbers | |
| Location: | On right side of tractor frame above the front axle. |
| John Deere 4310 Power | |
| Engine (gross): | 31.2 hp [23.3 kW] |
| PTO (claimed): | 27 hp [20.1 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post ROPS. Foldable ROPS optional. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 6.3 gal [23.8 L] (gear), 6.8 gal [25.7 L] (hydro) |
| Pressure: | 2500 psi [172.4 bar] |
| Valves: | 5 |
| Pump flow: | 8.6 gpm [32.6 lpm] |
| Total flow: | 13.9 gpm [52.6 lpm] |
| Steering flow: | 5.3 gpm [20.1 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40, 55 (optional) |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| info | |
| Power (gross): | 31.2 hp [23.3 kW] |
| Air cleaner: | dry |
| Compression: | 18.5:1 |
| Rated RPM: | 2600 |
| Idle RPM: | 1000-2810 |
| Starter volts: | 12 |
| Starter power: | 1.9 hp [1.4 kW] |
| Oil capacity: | 4.5 qts [4.3 L] |
| Coolant capacity: | 6 qts [5.7 L] |
| Engine Detail | |
| Yanmar 3TNE84, diesel, 3-cylinder, liquid-cooled, 92 ci [1.5 L] |
| info | |
| Speeds: | With 11.2-24 rear tires. |
| Transmission | |
| Transmission: | SyncShift |
| Type: | partially synchronized |
| Gears: | 9 forward and 3 reverse |
| Oil capacity: | 25.2 qts [23.8 L] |
| Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges. | |
| info | |
| Previous model: | John Deere 4300 |
| Series next: | John Deere 4410 |
| Series back: | John Deere 4210 |
| Dimensions | |
| Weight: | 2,600 lbs [1179 kg] (2WD), 2,900 lbs [1315 kg] (4WD) |
| Drawbar capacity: | 562 lbs [254 kg] |
| Front axle load: | 1,588 lbs [720 kg] |
| Rear axle load: | 4,410 lbs [2000 kg] |
| Wheelbase: | 68 inches [172 cm] |
| Length: | 117 inches [297 cm] |
| Width: | 50 inches [127 cm] |
| Height (hood): | 53.3 inches [135 cm] |
| Height (ROPS): | 82.4 inches [209 cm] (fixed), 90 inches [228 cm] (folding) |
| Ground clearance: | 13.4 inches [34 cm] |
| 2WD turn radius: | 7.5 feet [2.3 m] |
| John Deere 4310 Tires | |
| Ag front: | 5.00-15 (2WD), 7.00-14 (4WD) |
| Ag rear: | 11.2-24 |
| info | |
| Previous model: | John Deere 4300 |
| Series next: | John Deere 4410 |
| Series back: | John Deere 4210 |
| 60" Mower deck | |
| Type: | mid-mount John Deere 60 7-Iron |
| Cutting width: | 60 inches [152 cm] |
| 72" Mower deck | |
| Type: | mid-mount John Deere, 3-blade |
| Cutting width: | 72 inches [182 cm] |
| Loader | |
| Loader type: | John Deere 430 |
| Height (to pin): | 101.4 inches [257 cm] |
| Clearance, dumped bucket: | 78.3 inches [198 cm] |
| Dump reach: | 26 inches [66 cm] |
| Dump angle: | 45 |
| Reach at ground: | 57.5 inches [146 cm] |
| Rollback angle: | 30 |
| Breakout force (at pin): | 3299 lbs [1496 kg] |
| Breakout force (at 500mm): | 2417 lbs [1096 kg] |
| Lift to full height (at pin): | 1261 lbs [571 kg] |
| Lift to full height (at 500mm): | 1045 lbs [474 kg] |
| Raise time to height: | 3.5 s |
| Bucket dump time: | 1.8 s |
| Lowering time: | 2.5 s |
| Rollback time: | 2.3 s |
| Backhoe | |
| Backhoe type: | John Deere 48 |
| Weight: | 1517 lbs [688 kg] |
| Transport height: | 81 inches [205 cm] |
| 2-Foot flat digging depth: | 102 inches [259 cm] |
| Reach from pivot: | 133 inches [337 cm] |
| Loading height: | 82 inches [208 cm] |
| Bucket Rotation: | 180 |
| Swing Arc: | 180 |
| Bucket force: | 3730 lbs [1691 kg] |
| Dipperstick force: | 2435 lbs [1104 kg] |