FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
122o↔0oF [50o↔-17oC]: | : JD Hy-Gard |
80o↔-40oF [26o↔-40oC]: | : JD Lo Vis Hy-Gard |
Production | |
Manufacturer: | John Deere |
Type: | Compact Utility tractor |
Factory: | Augusta, Georgia, USA |
John Deere 4300 Power | |
Engine (gross): | 32.2 hp 24.0 kW |
Engine (net): | 30.2 hp 22.5 kW |
Gear PTO (claimed): | 27 hp 20.1 kW |
Hydro PTO (claimed): | 25.5 hp 19.0 kW |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Differential lock: | mechanical |
Steering: | power |
Brakes: | differential wet disc |
Cab: | Two-post ROPS |
Transmissions: | 9-speed partially synchronized, hydrostatic, 12-speed partially synchronized |
Capacity | |
Fuel: | 10 gal 37.9 L |
Gear Hydraulic system: | 6.3 gal 23.8 L |
Hydro Hydraulic system: | 6.8 gal 25.7 L |
Front axle: | 4.7 qts 4.4 L |
Hydraulics | |
Type: | open center |
Gear Capacity: | 6.3 gal 23.8 L |
Hydro Capacity: | 6.8 gal 25.7 L |
Pressure: | 2500 psi 172.4 bar |
Valves: | 2 |
Pump flow: | 8.3 gpm 31.4 lpm |
Total flow: | 13.3 gpm 50.3 lpm |
Steering flow: | 5 gpm 18.9 lpm |
Tractor hitch | |
Rear Type: | I |
Rear lift (at 24"/610mm): | 2,200 lbs 997 kg |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | wet disc |
Rear RPM: | 540 |
Engine RPM: | 2100@2700 |
Mid PTO: | optional |
Mid RPM: | 2100 |
Dimensions & Tires | |
Wheelbase: | 68 inches 172 cm |
Weight: | 3,000 lbs 1360 kg |
Front tire: | 5-15 |
2WD Rear tire: | 11.2-24 |
4300 Serial Numbers | |
Location: | Serial number plate on front-right tractor frame, above front wheel. |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 500 |
Volts: | 12 |
info | |
Series: | → 4400, |
Engine Detail | |
Yanmar 3TNE84, diesel, 3-cylinder, liquid-cooled | |
Displacement: | 91.3 ci 1.5 L |
Power (gross): | 32.2 hp 24.0 kW |
Fuel system: | direct injection |
Air cleaner: | dry |
Pre-heating: | air heat |
Compression: | 18:1 |
Rated RPM: | 2700 |
Idle RPM: | 950-2810 |
Operating RPM: | 950-2700 |
Starter volts: | 12 |
Starter power: | 1.9 hp 1.4 kW |
Coolant capacity: | 6.1 qts 5.8 L |
Engine Oil | |
Oil capacity: | 4.5 qts 4.3 L |
Oil change: | 200 h |
info | |
Series: | → 4400, |
Transmissions overview | |
9-speed partially synchronized, hydrostatic, 12-speed partially synchronized |
Transmission | |
Transmission: | SyncReverser |
Type: | partially synchronized |
Gears: | 12 forward and reverse |
Clutch: | wet discs, two clutch packs with nine four-inch discs each |
Oil capacity: | 25.2 qts 23.8 L |
Four gears (1-4) in three ranges (A-C) with left-hand reverser on steering column. Gears may be shifting on the move, using the clutch. Tractor must be stopped, and clutch used, to shift range. |
Speeds | |
With 11.2-24 rear tires., |
info | |
Series: | → 4400, |
John Deere 4300 Tires | |
2WD Standard tires (ag): | Front: 5-15. Rear: 11.2-24 |
4WD Standard tires (ag): | Front: 7-14. Rear: 11.2-24 |
2WD Optional tires (ag): | Front: 5-15. Rear: 12.4-24 |
4WD Optional tires (ag): | Front: 7-16. Rear: 12.4-24 |
Lawn/turf front: | 25-10.50LLx15, 27x8.5-15, 7.00-14 (4WD) |
Lawn/turf rear: | 41LLx18.00-16, 11.2-24, 41x14.00-20 |
Industrial front: | 25x8.50-14 |
Industrial rear: | 15.00-19.5 |
Dimensions | |
Wheelbase: | 68 inches 172 cm |
Length: | 117 inches 297 cm |
Width: | 50 inches 127 cm |
Clearance (rear axle): | 13.4 inches 34 cm |
John Deere 4300 Weight | |
3,000 lbs 1360 kg | |
Max Drawbar: | 562 lbs 254 kg |
Max front axle: | 3,197 lbs 1450 kg |
Max rear axle: | 4,409 lbs 1999 kg |
John Deere 4300 Height | |
Hood: | 53.3 inches 135 cm |
ROPS: | 84 inches 213 cm (fixed), 90 inches 228 cm (folding) |
info | |
Series: | → 4400, |
Attachment overview | |
60" mid-mount mower deck, 72" mid-mount mower deck, Front-end loader, Backhoe |
60" Mower deck | |
Type: | mid-mount John Deere |
Cutting width: | 60 inches 152 cm |
72" Mower deck | |
Type: | mid-mount John Deere |
Cutting width: | 72 inches 182 cm |
John Deere 420 Loader | |
Height (to pin): | 87.6 inches 222 cm |
Clearance, dumped bucket: | 66.1 inches 167 cm |
Dump reach: | 30.3 inches 76 cm |
Dump angle: | 43° |
Reach at ground: | 53.6 inches 136 cm |
Rollback angle: | 23° |
Breakout force (at 800mm): | 2,693 lbs 1221 kg |
Lift to full height (at 800mm): | 1,195 lbs 542 kg |
Raise time to height: | 2.9 s |
Bucket dump time: | 1.6 s |
Lowering time: | 2.4 s |
Rollback time: | 2.2 s |
John Deere 430 Loader | |
Height (to pin): | 101.4 inches 257 cm |
Clearance, dumped bucket: | 78.3 inches 198 cm |
Dump reach: | 25.6 inches 65 cm |
Dump angle: | 45° |
Reach at ground: | 57.5 inches 146 cm |
Rollback angle: | 30° |
Breakout force (at 800mm): | 3,299 lbs 1496 kg |
Lift to full height (at 800mm): | 1,259 lbs 571 kg |
Raise time to height: | 3.5 s |
Bucket dump time: | 1.8 s |
Lowering time: | 2.5 s |
Rollback time: | 2.3 s |
John Deere 47 Backhoe | |
Backhoe type: | John Deere 47 Backhoe |
John Deere 48 Backhoe | |
Backhoe type: | John Deere 48 Backhoe |
Weight: | 1517 lbs 688 kg |
Transport height: | 81 inches 205 cm |
2-Foot flat digging depth: | 102 inches 259 cm |
Reach from pivot: | 133 inches 337 cm |
Loading height: | 82 inches 208 cm |
Bucket Rotation: | 180 |
Swing Arc: | 180 |
Bucket force: | 3730 lbs 1691 kg |
Dipperstick force: | 2435 lbs 1104 kg |