John Deere 4230 Specifications - John Deere 4230 Specs

info
Series: → 4430
Production
Manufacturer: John Deere
Type: Row-Crop tractor
Factory: Waterloo, Iowa, USA
Total built: 33 (gasoline), 90 (Low-Profile)
The John Deere 4230 was the Generation II replacement for the popular 4020. A row-crop tricycle front-end was an option on the 4230. Along with the smaller 4030, this was the final tractor from the Deere's Waterloo factory to have a tricycle option.
Variants
4230 Hi-Crop: high clearance
4230 LP: low-profile
John Deere 4230 Power
Drawbar (claimed): 86 hp 64.1 kW
PTO (claimed): 100 hp 74.6 kW
Drawbar (tested): 83.95 hp 62.6 kW
PTO (tested): 100.32 hp 74.8 kW
Mechanical
Chassis: 4x2 2WD, 4x4 HFWD 4WD (optional)
Steering: power
Brakes: differential hydraulic wet disc
Cab: Open operator station. Four-post Roll-Gard ROPS optional. Sound-Gard cab with air-conditioning optional.
Transmissions: 16-speed partial power shift and synchronized, 8-speed full power shift, 8-speed
Capacity
Fuel: 37 gal 140.0 L
Rear hubs: 2.25 qts 2.1 L (Hi-Crop final drives)
Hydraulics
Type: closed center
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Dimensions & Tires
Wheelbase: 104 inches 264 cm
Weight: 8100 to 10800 pounds
Front tire: 11.00x16
Rear tire: 18.4-26
4230 Serial Numbers
Location: Serial number plate on the rear of the John Deere 4230, above the PTO shaft.
1973: 1000
1974: 13000
1975: 22074
1976: 28957
1977: 35588
Final: 42331
Electrical
Ground: negative
Batteries: 2
Battery volts: 6
info
Series: → 4430
Engines overview
John Deere 6.6L 6-cyl diesel, John Deere 5.9L 6-cyl gasoline
Engine Detail
John Deere, gasoline, 6-cylinder, liquid-cooled, The gasoline engine was only available during the 1973 model year for the Deere 4230.
Displacement: 362 ci 5.9 L
Starter volts: 12
info
Series: → 4430
Transmissions overview
16-speed partial power shift and synchronized, 8-speed full power shift, 8-speed
Transmission
Transmission: John Deere Syncro-Range
Gears: 8 forward and 2 reverse
Oil capacity: 64 qts 60.6 L
info
Series: → 4430
John Deere 4230 Tires
Ag front: 11.00x16, 9.5L-15, 6.00-16, 7.50-16, 10.00-16, 7.50-20 (Hi-Crop)
Ag rear: 18.4-26, 23.1-26, 16.9-34, 18.4-38, 13.6-38, 15.5-38, 16.9-38, 18.4-38, 20.8-34
Dimensions
Wheelbase: 104 inches 264 cm
Width: 89.625 inches 227 cm
Cab Width: 54.375 inches 138 cm
Height (hood): 109.875 inches 279 cm
Height (exhaust): 151.75 inches 385 cm
John Deere 4230 Weight
Shipping: 8,100 lbs 3674 kg (Syncro), 8,500 lbs 3855 kg
Operating: 10,800 lbs 4898 kg
Ballasted: 14,150 lbs 6418 kg
info
Series: → 4430
John Deere 148 Loader
Loader weight: 1350 lbs 612 kg
Height (to pin): 126 inches 320 cm
Clearance, dumped bucket: 102 inches 259 cm
Dump reach: 32 inches 81 cm
Dump angle: 38°
Clearance, level bucket: 121 inches 307 cm
Rollback angle: 11°
Breakout force (lift): 4700 lbs 2131 kg
Lift to full height (at pin): 3100 lbs 1406 kg
Bucket capacity: 0.5 cu yd 0.4 cu m, 0.6 cu yd 0.5 cu m, 0.8 cu yd 0.6 cu m, 0.9 cu yd 0.7 cu m
Bucket width: 60 inches 152 cm, 72 inches 182 cm, 84 inches 213 cm, 96 inches 243 cm
John Deere 158 Loader
Loader weight: 1771 lbs 803 kg
Height (to pin): 156 inches 396 cm
Clearance, dumped bucket: 132 inches 335 cm
Dump reach: 32 inches 81 cm
Dump angle: 37°
Clearance, level bucket: 151 inches 383 cm
Rollback angle: 12°
Breakout force (lift): 5000 lbs 2268 kg
Lift to full height (at pin): 3800 lbs 1723 kg
Bucket capacity: 0.5 cu yd 0.4 cu m, 0.6 cu yd 0.5 cu m, 0.8 cu yd 0.6 cu m, 0.9 cu yd 0.7 cu m
Bucket width: 60 inches 152 cm, 72 inches 182 cm, 84 inches 213 cm, 96 inches 243 cm