FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2002 - 2004 4000 Ten Compact Series, Compact Utility tractor | |
| Previous model: | John Deere 4200 |
| Series next: | John Deere 4310 |
| Series back: | John Deere 4115 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Capacity | |
| Fuel: | 10 gal [37.9 L] |
| Hydraulic system: | 6.3 gal [23.8 L] (gear), 6.8 gal [25.7 L] (hydro) |
| Front axle: | 4.7 qts [4.4 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Rear lift (at 24"/610mm): | 1,700 lbs [771 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Mid PTO: | optional |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 65 inches [165 cm] |
| Weight: | 2375 to 2675 pounds |
| Front tire: | 4.00-15 |
| Rear tire: | 11.2-24 |
| 4210 Serial Numbers | |
| Location: | On right side of tractor frame above the front axle. |
| John Deere 4210 Power | |
| Engine (gross): | 27 hp [20.1 kW] |
| PTO (claimed): | 23.5 hp [17.5 kW] (gear), 22 hp [16.4 kW] (hydro) |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post ROPS. Foldable ROPS optional. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 6.3 gal [23.8 L] (gear), 6.8 gal [25.7 L] (hydro) |
| Pressure: | 2125 psi [146.5 bar] |
| Valves: | 5 |
| Pump flow: | 7.0 gpm [26.5 lpm] |
| Total flow: | 12.3 gpm [46.6 lpm] |
| Steering flow: | 5.3 gpm [20.1 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40, 55 (optional) |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.23x3.31 inches [82 x 84 mm] |
| Power (gross): | 27 hp [20.1 kW] |
| Air cleaner: | dry |
| Compression: | 18.5:1 |
| Rated RPM: | 2600 |
| Idle RPM: | 1000-2810 |
| Starter volts: | 12 |
| Starter power: | 1.6 hp [1.2 kW] |
| Oil capacity: | 4.0 qts [3.8 L] |
| Coolant capacity: | 5.6 qts [5.3 L] |
| Engine Detail | |
| Yanmar 3TNE82A, diesel, 3-cylinder, liquid-cooled, 81.2 ci [1.3 L] |
| info | |
| Speeds: | With 12.4-16 rear tires. |
| Transmission | |
| Transmission: | SyncShift |
| Type: | partially synchronized |
| Gears: | 9 forward and 3 reverse |
| Oil capacity: | 25.2 qts [23.8 L] |
| Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges. | |
| info | |
| Previous model: | John Deere 4200 |
| Series next: | John Deere 4310 |
| Series back: | John Deere 4115 |
| Dimensions | |
| Weight: | 2,375 lbs [1077 kg] (2WD), 2,675 lbs [1213 kg] (4WD) |
| Drawbar capacity: | 562 lbs [254 kg] |
| Front axle load: | 1,588 lbs [720 kg] |
| Rear axle load: | 4,410 lbs [2000 kg] |
| Wheelbase: | 65 inches [165 cm] |
| Length: | 117 inches [297 cm] |
| Width: | 53 inches [134 cm] |
| Height (hood): | 50.4 inches [128 cm] |
| Height (ROPS): | 79.5 inches [201 cm] (fixed), 87.1 inches [221 cm] (folding) |
| Clearance (rear axle): | 30.1 inches [76 cm] |
| John Deere 4210 Tires | |
| Ag front: | 4.00-15 (2WD), 7.00-14 (4WD) |
| Ag rear: | 11.2-24 |
| info | |
| Previous model: | John Deere 4200 |
| Series next: | John Deere 4310 |
| Series back: | John Deere 4115 |
| 60" Mower deck | |
| Type: | mid-mount John Deere 60 7-Iron |
| Cutting width: | 60 inches [152 cm] |
| 72" Mower deck | |
| Type: | mid-mount John Deere, 3-blade |
| Cutting width: | 72 inches [182 cm] |
| Loader | |
| Loader type: | John Deere 420 |
| Height (to pin): | 86.5 inches [219 cm] |
| Clearance, dumped bucket: | 63 inches [160 cm] |
| Dump reach: | 30.3 inches [76 cm] |
| Dump angle: | 41 |
| Reach at ground: | 57.8 inches [146 cm] |
| Rollback angle: | 24 |
| Breakout force (at pin): | 2141 lbs [971 kg] |
| Lift to full height (at pin): | 1003 lbs [454 kg] |
| Lift to full height (at 500mm): | 757 lbs [343 kg] |
| Raise time to height: | 3.3 s |
| Bucket dump time: | 1.8 s |
| Lowering time: | 2.5 s |
| Rollback time: | 2.4 s |
| Backhoe | |
| Backhoe type: | John Deere 47 |
| Weight: | 1047 lbs [474 kg] |
| 2-Foot flat digging depth: | 90 inches [228 cm] |
| Reach from pivot: | 114 inches [289 cm] |
| Loading height: | 70 inches [177 cm] |
| Bucket Rotation: | 180 |
| Swing Arc: | 180 |
| Bucket force: | 2840 lbs [1288 kg] |
| Dipperstick force: | 2005 lbs [909 kg] |