John Deere 4200 Specifications - John Deere 4200 Specs

info
122o↔0oF [50o↔-17oC]: : JD Hy-Gard
80o↔-40oF [26o↔-40oC]: : JD Lo Vis Hy-Gard
Production
Manufacturer: John Deere
Factory: Augusta, Georgia, USA
Original price (USD): $14,000 (1999)
Capacity
Fuel: 10 gal [37.9 L]
Hydraulic system: 6.3 gal [23.8 L] (gear), 6.8 gal [25.7 L] (hydro)
Front axle: 4.7 qts [4.4 L]
3-Point Hitch
Rear Type: I
Rear lift (at 24"/610mm): 1,700 lbs [771 kg]
Power Take-off (PTO)
Rear PTO: independent
Clutch: wet disc
Rear RPM: 540
Engine RPM: 2100@2700
Mid PTO: optional
Mid RPM: 2100
Dimensions & Tires
2WD Wheelbase: 65 inches [165 cm]
4WD Wheelbase: 68 inches [172 cm]
Weight: 2,400 lbs [1088 kg]
Front tire: 4.00-15
2WD Rear tire: 12.4-16
4200 Serial Numbers
Location: Serial number plate on front-right tractor frame, above front wheel.
John Deere 4200 Power
Engine (gross): 26.3 hp [19.6 kW]
Engine (net): 24.3 hp [18.1 kW]
PTO (claimed): 21.5 hp [16.0 kW] (gear), 20 hp [14.9 kW] (hydro)
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Differential lock: mechanical
Steering: power
Brakes: differential wet disc
Cab: Two-post ROPS.
Hydraulics
Type: open center
Capacity: 6.3 gal [23.8 L] (gear), 6.8 gal [25.7 L] (hydro)
Pressure: 2125 psi [146.5 bar]
Valves: 2
Pump flow: 7.3 gpm [27.6 lpm]
Total flow: 12.3 gpm [46.6 lpm]
Steering flow: 5 gpm [18.9 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 40
Battery
Number: 1
Cold-cranking amps: 500
Volts: 12
info
Power (gross): 26.3 hp [19.6 kW]
Fuel system: direct injection
Air cleaner: dry
Pre-heating: air heat
Compression: 18:1
Rated RPM: 2700
Idle RPM: 950-2810
Operating RPM: 950-2700
Starter volts: 12
Starter power: 1.6 hp [1.2 kW]
Oil capacity: 4 qts [3.8 L]
Oil change: 200 h
Coolant capacity: 5.6 qts [5.3 L]
Engine Detail
Yanmar 3TNE78A, diesel, 3-cylinder, liquid-cooled, 73.5 ci [1.2 L]
info
Speeds: With 12.4-16 rear tires.
Transmission
Transmission: SyncShift
Type: partially synchronized
Gears: 9 forward and 3 reverse
Clutch: wet discs, one clutch pack with nine four-inch discs
Oil capacity: 25.2 qts [23.8 L]
Three gears (1-3), plus reverse, in three ranges (A-C). Gears may be shifting on the move, using the clutch. Tractor must be stopped, and clutch used, to shift ranges.
info
Previous model: John Deere 770
Next model: John Deere 4210
Series next: John Deere 4300
Series back: John Deere 4100
Dimensions
Weight: 2,400 lbs [1088 kg]
Drawbar capacity: 562 lbs [254 kg]
Front axle load: 2,811 lbs [1275 kg]
Rear axle load: 4,409 lbs [1999 kg]
2WD Wheelbase: 65 inches [165 cm]
4WD Wheelbase: 68 inches [172 cm]
Length: 117 inches [297 cm]
2WD Width: 53 inches [134 cm]
4WD Width: 50 inches [127 cm]
2WD Height (hood): 50.4 inches [128 cm]
4WD Height (hood): 53.3 inches [135 cm]
Height (ROPS): 81 inches [205 cm] (2WD fixed), 84 inches [213 cm] (4WD fixed), 87 inches [220 cm] (folding)
Clearance (rear axle): 10.5 inches [26 cm]
John Deere 4200 Tires
2WD Standard tires (ag): Front: 4.00-15. Rear: 12.4-16
4WD Standard tires (ag): Front: 7.00-14. Rear: 12.4-24
2WD Ag front: 5.00-15
Ag rear: 11.2-24
Lawn/turf front: 25-10.50LLx15, 25x8.5-14
4WD Lawn/turf front: 7.00-14
Lawn/turf rear: 41LLx18.00-16, 11.2-24, 13.6-16
Industrial front: 23x8.50-12
Industrial rear: 14.00-17.5
info
Previous model: John Deere 770
Next model: John Deere 4210
Series next: John Deere 4300
Series back: John Deere 4100
60" Mower deck
Type: mid-mount John Deere
Cutting width: 60 inches [152 cm]
72" Mower deck
Type: mid-mount John Deere
Cutting width: 72 inches [182 cm]
Loader
Loader type: John Deere 420
Height (to pin): 86.5 inches [219 cm]
Clearance, dumped bucket: 63 inches [160 cm]
Dump reach: 30.3 inches [76 cm]
Dump angle: 43
Reach at ground: 57.8 inches [146 cm]
Rollback angle: 24
Breakout force (at 800mm): 2,141 lbs [971 kg]
Lift to full height (at 800mm): 1,003 lbs [454 kg]
Raise time to height: 3.3 s
Bucket dump time: 1.8 s
Lowering time: 2.5 s
Rollback time: 2.4 s
Backhoe
Backhoe type: John Deere 47
Weight: 1047 lbs [474 kg]
2-Foot flat digging depth: 90 inches [228 cm]
Reach from pivot: 114 inches [289 cm]
Loading height: 70 inches [177 cm]
Bucket Rotation: 180
Swing Arc: 180
Bucket force: 2840 lbs [1288 kg]
Dipperstick force: 2005 lbs [909 kg]