John Deere 4115 Specifications - John Deere 4115 Specs

info
2003 - 2004 4000 Ten Compact Series, Compact Utility tractor
Series next: John Deere 4210
Series back: John Deere 4110
Production
Distributor: John Deere
Manufacturer: Yanmar
Factory: Japan
Capacity
Fuel: 7.1 gal [26.9 L]
Hydraulic system: 3.9 gal [14.8 L]
Front axle: 3.6 qts [3.4 L]
3-Point Hitch
Rear Type: I
Rear lift (at 24"/610mm): 1,150 lbs [521 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540
Mid PTO: independent
Mid RPM: 2100
Dimensions & Tires
Wheelbase: 64.6 inches [164 cm]
Weight: 1,771 lbs [803 kg]
Front tire: 7.00-12
Rear tire: 35x12.00-16.5
John Deere 4115 Power
Engine: 24 hp [17.9 kW]
PTO (claimed): 20 hp [14.9 kW]
Mechanical
Chassis: 4x4 MFWD 4WD
Steering: power
Cab: ROPS.
Hydraulics
Type: open center
Capacity: 3.9 gal [14.8 L]
Valves: 5
Pump flow: 5.1 gpm [19.3 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 20
Battery
Number: 1
Cold-cranking amps: 435
Volts: 12
info
Power: 24 hp [17.9 kW]
Rated RPM: 2650
Starter volts: 12
Oil capacity: 2.1 qts [2.0 L]
Coolant capacity: 2.5 qts [2.4 L]
Engine Detail
Yanmar 3TNE78A, diesel, 3-cylinder, liquid-cooled, 73.3 ci [1.2 L]
info
122o↔0oF [50o↔-17oC]: : HY-GARD
80o↔-40oF [26o↔-40oC]: : Low-viscosity HY-GARD
Transmission
Type: hydrostatic
Gears: infinite (2-range) forward and reverse
Oil capacity: 15.6 qts [14.8 L]
The John Deere 4115 uses a two-range hydrostatic transmission operated with forward and reverse foot pedals. Left-hand shifter selects range. Tractor must be stopped to switch ranges.
info
Series next: John Deere 4210
Series back: John Deere 4110
Dimensions
Weight (operating): 1,771 lbs [803 kg]
Wheelbase: 64.6 inches [164 cm]
Length: 108 inches [274 cm]
Width: 47 inches [119 cm]
Height (hood): 50 inches [127 cm]
Height (ROPS): 81 inches [205 cm], 69 inches [175 cm] (folded)
Ground clearance: 11 inches [27 cm]
John Deere 4115 Tires
Ag front: 7.00-12
Ag rear: 35x12.00-16.5
Lawn/turf front: 24x8.50-12
Lawn/turf rear: 315/80D-16
Industrial rear: 12-16.5
info
Series next: John Deere 4210
Series back: John Deere 4110
60" Mower deck
Type: mid-mount John Deere
Cutting width: 60 inches [152 cm]
72" Mower deck
Type: mid-mount John Deere, 3-blade
Cutting width: 72 inches [182 cm]
Loader
Loader type: John Deere 410
Height (to pin): 74 inches [187 cm]
Clearance, dumped bucket: 55 inches [139 cm]
Dump reach: 27.5 inches [69 cm]
Dump angle: 47
Rollback angle: 18
Breakout force (at pin): 2257 lbs [1023 kg]
Breakout force (at 500mm): 1500 lbs [680 kg]
Lift to full height (at pin): 882 lbs [400 kg]
Lift to full height (at 500mm): 618 lbs [280 kg]
Raise time to height: 2.5 s
Bucket dump time: 1.8 s
Lowering time: 2.0 s
Rollback time: 1.9 s