FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2014 - 4M Series, Compact Utility tractor | |
| Previous model: | John Deere 4320 |
| Series next: | John Deere 4052M |
| Series back: | John Deere 4044M |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Variants | |
| 4049M: | base model |
| 4049R: | deluxe model |
| Capacity | |
| Fuel: | 13 gal [49.2 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control |
| Rear lift (at ends): | 3130 lbs [1419 kg] |
| Rear lift (at 24"/610mm): | 2500 lbs [1134 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 (1.375) |
| Engine RPM: | 540@2400 |
| Dimensions & Tires | |
| Wheelbase: | 73 inches [185 cm] |
| Weight: | 3770 lbs [1710 kg] |
| Front tire: | 8.00-16 |
| Rear tire: | 13.6-28 |
| 4049M Serial Numbers | |
| Location: | Serial number plate on the right side of the 4049M tractor frame, above the front axle. |
| John Deere 4049M Power | |
| Engine: | 49 hp [36.5 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Final drives: | planetary |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Two-post folding ROPS. |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2500 psi [172.4 bar] |
| Pump flow: | 10.2 gpm [38.6 lpm] |
| Total flow: | 15.9 gpm [60.2 lpm] |
| Steering flow: | 5.7 gpm [21.6 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 75 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 770 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.31x3.54 inches [84 x 90 mm] |
| Emissions: | Tier IV |
| Emission control: | diesel particulate filter (DPF) |
| Power: | 49 hp [36.5 kW] |
| Rated RPM: | 2600 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| Yanmar 4TNV84T, turbocharged diesel, 4-cylinder, liquid-cooled, 121.7 ci [2.0 L] |
| info | |
| Previous model: | John Deere 4320 |
| Series next: | John Deere 4052M |
| Series back: | John Deere 4044M |
| Transmission | |
| Transmission: | PowrReverser |
| Type: | power shuttle |
| Gears: | 12 forward and reverse |
| Clutch: | wet disc |
| info | |
| Previous model: | John Deere 4320 |
| Series next: | John Deere 4052M |
| Series back: | John Deere 4044M |
| Dimensions | |
| Weight: | 3770 lbs [1710 kg] |
| Wheelbase: | 73 inches [185 cm] |
| Length: | 130.6 inches [331 cm] |
| Height (ROPS): | 100.2 inches [254 cm] |
| Height (cab): | 97.4 inches [247 cm] |
| Clearance (front axle): | 13.8 inches [35 cm] |
| Front tread: | 53.6 inches [136 cm] |
| Rear tread: | 59.9 inches [152 cm] |
| John Deere 4049M Tires | |
| Ag front: | 8.00-16 |
| Ag rear: | 13.6-28 |
| Lawn/turf front: | 27x10.50-15 |
| Lawn/turf rear: | 44x18-20 |
| info | |
| Previous model: | John Deere 4320 |
| Series next: | John Deere 4052M |
| Series back: | John Deere 4044M |
| Loader | |
| Loader type: | John Deere 400E |
| Height (to pin): | 112 inches [284 cm] |
| Clearance, dumped bucket: | 90 inches [228 cm] |
| Dump reach: | 28 inches [71 cm] |
| Dump angle: | 42 |
| Clearance, level bucket: | 104 inches [264 cm] |
| Reach at ground: | 66 inches [167 cm] |
| Breakout force (at pin): | 3853 lbs [1747 kg] |
| Breakout force (at 500mm): | 2902 lbs [1316 kg] |
| Breakout force (bucket): | 3487 lbs [1581 kg] |
| Lift to full height (at pin): | 2391 lbs [1084 kg] |
| Lift to full height (at 500mm): | 1760 lbs [798 kg] |
| Lift to 1.5m (at pin): | 2875 lbs [1304 kg] |
| Lift to 1.5m (at 500mm): | 2295 lbs [1041 kg] |
| Bucket width: | 73 inches [185 cm] |
| Backhoe | |
| Backhoe type: | John Deere 485A |