FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1973 - 1977 Generation II Series, Row-Crop tractor | |
| Previous model: | John Deere 3020 |
| Next model: | John Deere 4040 |
| Series next: | John Deere 4230 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Waterloo, Iowa, USA |
| Total built: | 15,690 (total), 222 (gasoline) |
| Original price (USD): | $17,721 (1977) |
| Capacity | |
| Fuel: | 35 gal [132.5 L] |
| Hydraulic system: | 13 gal [49.2 L] |
| 3-Point Hitch | |
| Rear Type: | II |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Dimensions & Tires | |
| Wheelbase: | 101 inches [256 cm] |
| Weight: | 9180 to 10150 pounds |
| Front tire: | 6.00-16 |
| Rear tire: | 16.9-34 |
| John Deere 4030 Power | |
| Drawbar (tested): | 67.03 hp [50.0 kW] |
| PTO (tested): | 80.33 hp [59.9 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Differential lock: | mechanical rear*Optional |
| Steering: | power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Open operator station. Optional four-post Roll-Gard ROPS. Optional Sound-Gard cab with heat and air-conditioning available. |
| Hydraulics | |
| Type: | closed center |
| Capacity: | 13 gal [49.2 L] |
| Valves: | 1 to 3 |
| Pump flow: | 23 gpm [87.1 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Battery | |
| Number: | 2 |
| Volts: | 6 |
| info | |
| Bore/Stroke: | 4.02x4.33 inches [102 x 110 mm] |
| Air cleaner: | dual dry type |
| Pre-heating: | ether, coolant heater (optional) |
| Compression: | 16.2:1 |
| Rated RPM: | 2500 |
| Starter volts: | 12 |
| Coolant capacity: | 22 qts [20.8 L] |
| Engine Detail | |
| John Deere, diesel, 6-cylinder, liquid-cooled, 329 ci [5.4 L] |
| info | |
| Previous model: | John Deere 3020 |
| Next model: | John Deere 4040 |
| Series next: | John Deere 4230 |
| Transmission | |
| Transmission: | John Deere Syncro-Range |
| Type: | partially synchronized |
| Gears: | 8 forward and 2 reverse |
| info | |
| Previous model: | John Deere 3020 |
| Next model: | John Deere 4040 |
| Series next: | John Deere 4230 |
| Dimensions | |
| Weight (operating): | 9,180 lbs [4164 kg] |
| Weight (ballasted): | 10,150 lbs [4604 kg] |
| Wheelbase: | 101 inches [256 cm] |
| Rear axle: | 2.875 inch diameter [73 mm] 3.125 inch diameter [79 mm] |
| Front tread: | 48 to 68 inches [121 to 172 cm] |
| Rear tread: | 60 to 92.6 inches [152 to 235 cm] |
| John Deere 4030 Tires | |
| Ag front: | 6.00-16 |
| Ag rear: | 16.9-34 |
| info | |
| Previous model: | John Deere 3020 |
| Next model: | John Deere 4040 |
| Series next: | John Deere 4230 |
| Loader | |
| Loader type: | John Deere 148 |
| Weight: | 1350 lbs [612 kg] |
| Height (to pin): | 126 inches [320 cm] |
| Clearance, dumped bucket: | 102 inches [259 cm] |
| Dump reach: | 32 inches [81 cm] |
| Dump angle: | 38 |
| Clearance, level bucket: | 121 inches [307 cm] |
| Rollback angle: | 11 |
| Breakout force (lift): | 4700 lbs [2131 kg] |
| Lift to full height (at pin): | 3100 lbs [1406 kg] |
| Bucket capacity: | 0.5 cu yd [0.4 cu m], 0.6 cu yd [0.5 cu m], 0.8 cu yd [0.6 cu m], 0.9 cu yd [0.7 cu m] |
| Bucket width: | 60 inches [152 cm], 72 inches [182 cm], 84 inches [213 cm], 96 inches [243 cm] |