John Deere 4010 Specifications - John Deere 4010 Specs

info
Series: → 4110
Production
Distributor: John Deere
Manufacturer: Yanmar
Type: Compact Utility tractor
Factory: Japan
John Deere 4010 Power
Engine (gross): 18.5 hp 13.8 kW
PTO (claimed): 14 hp 10.4 kW
Mechanical
Chassis: 4x4 MFWD 4WD
Steering: hydrostatic power
Brakes: wet disc
Cab: Two-post ROPS.
Transmission: hydrostatic
Capacity
Fuel: 3.4 gal 12.9 L
Hydraulic system: 2.6 gal 9.8 L
Front axle: 3.6 qts 3.4 L
Hydraulics
Type: open center
Capacity: 2.6 gal 9.8 L
Tractor hitch
Rear Type: I
Rear lift (at 24"/610mm): 860 lbs 390 kg
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540
Mid RPM: 2100
Dimensions & Tires
Wheelbase: 57.1 inches 145 cm
Weight: 1420 lbs 644 kg
Front tire: 6-12
Rear tire: 8-16
4010 Serial Numbers
Location: Serial number plate on right side above the tractor's front axle.
2002: LV4010H100001
2003: LV4010H210001
2004: LV4010H310001
2005: LV4010H410001
Electrical
Ground: negative
Charging system: alternator
Charging amps: 20
Battery CCA: 435
Battery volts: 12
info
Series: → 4110
Engine Detail
Yanmar 3TNE68, diesel, 3-cylinder, liquid-cooled
Displacement: 47.84 ci 0.8 L
Bore/Stroke: 2.68x2.83 inches 68 x 72 mm
Power (gross): 18.5 hp 13.8 kW
Fuel system: indirect injection
Air cleaner: dry
Rated RPM: 3000
Operating RPM: 1300-3225
Starter volts: 12
Oil capacity: 2.1 qts 2.0 L
Coolant capacity: 2.5 qts 2.4 L
info
Series: → 4110
Transmission
Type: hydrostatic
Gears: infinite (2-range) forward and reverse
Oil capacity: 10.4 qts 9.8 L
info
Series: → 4110
John Deere 4010 Tires
Ag front: 6-12
Ag rear: 8-16
Lawn/turf front: 22x9.00-12
Lawn/turf rear: 29x12.50-15
Industrial front: 5.70-12
Industrial rear: 10-16.5
Dimensions
Wheelbase: 57.1 inches 145 cm
Length: 102 inches 259 cm
Width: 40.6 inches 103 cm *Minimum, 44.5 inches 113 cm *Maximum
Height (hood): 44 inches 111 cm
Height (ROPS): 78.4 inches 199 cm
Weight: 1420 lbs 644 kg
Max Drawbar: 562 lbs 254 kg
Clearance (front axle): 9.8 inches 24 cm
info
Series: → 4110
Attachment overview
54" mid-mount mower deck, 60" mid-mount mower deck, Front-end loader
54" Mower deck
Type: mid-mount John Deere, 3-blade
Cutting width: 54 inches 137 cm
Weight: 190 lbs 86 kg
Overall width: 57.9 inches 147 cm
60" Mower deck
Type: mid-mount John Deere, 3-blade
Cutting width: 60 inches 152 cm
Weight: 325 lbs 147 kg
Overall width: 73.5 inches 186 cm
John Deere 410 Loader
Height (to pin): 76 inches 193 cm
Clearance, dumped bucket: 55 inches 139 cm
Dump reach: 28 inches 71 cm
Dump angle: 46°
Rollback angle: 17.5°
Breakout force (lift): 1035 lbs 469 kg
Breakout force (at pin): 1550 lbs 703 kg
Lift to full height (at pin): 562 lbs 254 kg
Lift to full height (at 500mm): 397 lbs 180 kg
Raise time to height: 2.5 s
Bucket dump time: 1.8 s
Lowering time: 2.0 s
Rollback time: 1.9 s