John Deere 4000 Specifications - John Deere 4000 Specs

info
The 4000 was a high horsepower-to-weight tractor, designed as a "runner". Using the same engine as the 4020, but being almost 1000 lbs lighter, the 4000 could, in the same amount of time, pull a 4-bottom plow fast enough to cover the same acreage as a 4020 with a 5-bottom plow. The John Deere 4000 was also an economy tractor, providing the same power as the 4020 with fewer features and smaller rear axles.
Production
Manufacturer: John Deere
Factory: Waterloo, Iowa, USA
Total built: 7,987 (total), 7,294 (diesel Synchro-Range), 428 (diesel Power Shift), 256 (gas Synchro-Range), 9 (gas Power Shift)
3-Point Hitch
Rear Type: II
Power Take-off (PTO)
Rear RPM: 1000, 540/1000 (optional)
Dimensions & Tires
Wheelbase: 100.25 inches [254 cm]
Weight: 8,605 lbs [3903 kg]
Front tire: 9.5x15
Rear tire: 16.9x34
4000 Serial Numbers
Location: Serial number plate on the rear of the John Deere 4000, above the PTO shaft.
John Deere 4000 Power
Drawbar (claimed): 84.82 hp [63.3 kW]
PTO (claimed): 96.89 hp [72.3 kW]
Drawbar (tested): 82.59 hp [61.6 kW]
PTO (tested): 96.89 hp [72.3 kW]
Mechanical
Chassis: 4x2 2WD
Steering: power
Brakes: independent hydraulic wet disc
Electrical
Charging system: generator, Motorola alternator
Charging amps: 35
Battery
Number: 2
Volts: 6
info
Bore/Stroke: 4.25x4.75 inches [108 x 121 mm]
Compression: 16.5:1
Rated RPM: 2200
Firing order: 1-5-3-6-2-4
Starter volts: 12
Engine Detail
John Deere, diesel, 6-cylinder, liquid-cooled, 404 ci [6.6 L]
info
Series next: John Deere 4020
Transmission
Transmission: John Deere Syncro-Range
Type: partial synchronized
Gears: 8 forward and 2 reverse
The 4000's Syncro-Range was modified from that used on the 4020, the reverse synchronizers were eliminated requiring the tractor to be stopped when shifting from forward to reverse. Shifts between the two forward gears in each of the shift stations are synchronized.
info
Series next: John Deere 4020
Dimensions
Weight (operating): 8,605 lbs [3903 kg]
Weight (ballasted): 10,870 lbs [4930 kg]
Wheelbase: 100.25 inches [254 cm]
Rear axle: 3.125 inch diameter [79 mm]
John Deere 4000 Tires
Ag front: 9.5x15
Ag rear: 16.9x34
info
Series next: John Deere 4020
Loader
Loader type: John Deere 158
Weight: 1771 lbs [803 kg]
Height (to pin): 156 inches [396 cm]
Clearance, dumped bucket: 132 inches [335 cm]
Dump reach: 32 inches [81 cm]
Dump angle: 37
Clearance, level bucket: 151 inches [383 cm]
Rollback angle: 12
Breakout force (lift): 5000 lbs [2268 kg]
Lift to full height (at pin): 3800 lbs [1723 kg]
Bucket capacity: 0.5 cu yd [0.4 cu m], 0.6 cu yd [0.5 cu m], 0.8 cu yd [0.6 cu m], 0.9 cu yd [0.7 cu m]
Bucket width: 60 inches [152 cm], 72 inches [182 cm], 84 inches [213 cm], 96 inches [243 cm]