FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2006 - 2008, Compact Utility tractor |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Capacity | |
| Fuel: | 11.5 gal [43.5 L] |
| Hydraulic system: | 6.8 gal [25.7 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control |
| Rear lift (at ends): | 2149 lbs [974 kg] |
| Rear lift (at 24"/610mm): | 1868 lbs [847 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | wet disc |
| Rear RPM: | 540 |
| Engine RPM: | 540@2400 |
| Dimensions & Tires | |
| Wheelbase: | 68 inches [172 cm] |
| Weight: | 2700 lbs [1224 kg] |
| Front tire: | 25x8.50-14 |
| Rear tire: | 15-19.5 |
| John Deere 3203 Power | |
| Engine (gross): | 32 hp [23.9 kW] |
| PTO (claimed): | 24 hp [17.9 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post ROPS. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 6.8 gal [25.7 L] |
| Pressure: | 2150 psi [148.2 bar] |
| Valves: | 2 |
| Pump flow: | 7.6 gpm [28.8 lpm] |
| Total flow: | 13.3 gpm [50.3 lpm] |
| Steering flow: | 5.7 gpm [21.6 lpm] |
| Steering press.: | 1500 psi [103.4 bar] |
| Electrical | |
| Ground: | negative |
| Charging amps: | 75 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| Group: | 22NF |
| info | |
| Bore/Stroke: | 3.3x3.54 inches [84 x 90 mm] |
| Emissions: | Tier II |
| Rated Power (EC 97/98): | 32 hp [23.9 kW] |
| Air cleaner: | dry with safety element |
| Compression: | 19:1 |
| Rated RPM: | 2800 |
| Idle RPM: | 950-2975 |
| Operating RPM: | 950-2975 |
| Torque: | 73.8 lb-ft [100.1 Nm] |
| Torque RPM: | 1680 |
| Starter volts: | 12 |
| Starter power: | 1.6 hp [1.2 kW] |
| Oil capacity: | 4.5 qts [4.3 L] |
| Oil change: | 200 h |
| Coolant capacity: | 5.6 qts [5.3 L] |
| Engine Detail | |
| Yanmar 3TNV84, diesel, 3-cylinder, liquid-cooled, 91.5 ci [1.5 L] |
| Transmission | |
| Type: | hydrostatic |
| Gears: | infinite (2-range) forward and reverse |
| Dimensions | |
| Weight: | 2700 lbs [1224 kg] |
| Drawbar capacity: | 882 lbs [400 kg] |
| Front axle load: | 3197 lbs [1450 kg] |
| Rear axle load: | 4000 lbs [1814 kg] |
| Wheelbase: | 68 inches [172 cm] |
| Length: | 120.2 inches [305 cm] |
| Width: | 53.1 inches [134 cm] *Minimum width, 69.1 inches [175 cm] *Maximum |
| Height (hood): | 54.7 inches [138 cm] |
| Height (ROPS): | 83 inches [210 cm] |
| 4WD turn radius: | 9.2 feet [2.8 m] |
| John Deere 3203 Tires | |
| Ag front: | 25x8.50-14 |
| Ag rear: | 15-19.5 |
| info | |
| Mowing attachments listed for the 3203 included 4-, 5-, and 6-foot rotary cutters; plus the 261 and 272 rear-mount mowers. The 655 and 665 tillers were also available. |
| Loader | |
| Loader type: | John Deere 300 |
| Height (to pin): | 112.8 inches [286 cm] |
| Clearance, dumped bucket: | 68 inches [172 cm] |
| Dump reach: | 33 inches [83 cm] |
| Dump angle: | 40.5 |
| Reach at ground: | 53.7 inches [136 cm] |
| Rollback at ground: | 21 |
| Rollback, raised: | 101 |
| Breakout force (at pin): | 1,728 lbs [783 kg] |
| Breakout force (at 500mm): | 1,229 lbs [557 kg] |
| Breakout force (bucket): | 1,115 lbs [505 kg] |
| Lift to full height (at pin): | 740 lbs [335 kg] |
| Lift to full height (at 500mm): | 547 lbs [248 kg] |
| Lift to 1.5m (at pin): | 951 lbs [431 kg] |
| Lift to 1.5m (at 500mm): | 740 lbs [335 kg] |
| Attachment style: | hooks and lock pins |
| Raise time to height: | 3.2 s |
| Bucket dump time: | 2.71 s |
| Lowering time: | 1.63 s |
| Rollback time: | 1.38 s |