John Deere 3130 Specifications - John Deere 3130 Specs

info
The John Deere 3130 saw a redesign in 1975 at tractor serial number 182150. The front, hood, and decals were changed to a more rounded appearance. The 3130 was sold as the 2840 in the United States.
Production
Manufacturer: John Deere
Factory: Mannheim, Baden-WГјrttemberg, Germany
Original price (USD), $17,000 (1979 ),
Variants
3130LS: 12-speed
Capacity
Fuel: 28 gal [106.0 L]
Hydraulic system: 12.9 gal [48.8 L]
3-Point Hitch
Rear Type: II
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Dimensions & Tires
Wheelbase: 96.9 inches [246 cm]
Weight: 8200 lbs [3719 kg]
Front tire: 7.50-18
2WD Rear tire: 18.4-34
3130 Serial Numbers
Location: Serial number plate on the front-right of the 3130 tractor frame, above front axle.
John Deere 3130 Power
Drawbar (claimed): 67.4 hp [50.3 kW]
PTO (claimed): 80.65 hp [60.1 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Steering: power
Brakes: wet disc
Cab: Open operator station. Cab optional.
Hydraulics
Type: closed center
Capacity: 12.9 gal [48.8 L]
Pump flow: 23 gpm [87.1 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 28, 55
Battery
Number: 2
Volts: 12
info
Bore/Stroke: 4.02x4.33 inches [102 x 110 mm]
Rated RPM: 2500
Starter volts: 12
Coolant capacity: 5 qts [4.7 L]
Engine Detail
The 3130 engine could be ordered with an optional turbocharger (TA 3401) as an altitude compensator., John Deere, diesel, 6-cylinder, liquid-cooled, 329 ci [5.4 L]
info
Series back: John Deere 3030
Transmission
Transmission: Hi-Lo
Gears: 12 forward and 6 reverse
Three gears in two ranges, plus reverse range. Two-speed hydraulic high-low shift.
info
Series back: John Deere 3030
Dimensions
Weight: 8200 lbs [3719 kg]
Wheelbase: 96.9 inches [246 cm]
Length: 157.5 inches [400 cm]
John Deere 3130 Tires
2WD Standard tires (ag): Front: 7.50-20. Rear: 16.9-38
4WD Standard tires (ag): Front: 12.4-24. Rear: 16.9-38
info
Series back: John Deere 3030
Loader
Loader type: John Deere 148
Weight: 1350 lbs [612 kg]
Height (to pin): 126 inches [320 cm]
Clearance, dumped bucket: 102 inches [259 cm]
Dump reach: 32 inches [81 cm]
Dump angle: 38
Clearance, level bucket: 121 inches [307 cm]
Rollback angle: 11
Breakout force (lift): 4700 lbs [2131 kg]
Lift to full height (at pin): 3100 lbs [1406 kg]
Bucket capacity: 0.5 cu yd [0.4 cu m], 0.6 cu yd [0.5 cu m], 0.8 cu yd [0.6 cu m], 0.9 cu yd [0.7 cu m]
Bucket width: 60 inches [152 cm], 72 inches [182 cm], 84 inches [213 cm], 96 inches [243 cm]