FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2019 - 3D Series, Compact Utility tractor | |
Series next: | John Deere 3043D |
Series back: | John Deere 3025D |
Production | |
Manufacturer: | John Deere |
Original price (USD), $20,597 (2019 ), |
Capacity | |
Fuel: | 9.7 gal [36.7 L] |
3-Point Hitch | |
Rear Type: | I |
Control: | position control |
Rear lift (at 24"/610mm): | 1670 lbs [757 kg] |
Power Take-off (PTO) | |
Rear PTO: | transmission |
Engine RPM: | 540@2400 |
Dimensions & Tires | |
Wheelbase: | 62 inches [157 cm] |
Weight: | 2811 lbs [1275 kg] |
Front tire: | 7-14 |
Rear tire: | 11.2-24 |
3035D Serial Numbers | |
Location: | Serial number plate on the left side of the tractor frame, above the front axle. |
John Deere 3035D Power | |
Engine (gross): | 34.7 hp [25.9 kW] |
PTO (claimed): | 30.8 hp [23.0 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | spur gear |
Steering: | power |
Brakes: | mechanical wet disc |
Cab: | Two-post folding ROPS. |
Hydraulics | |
Type: | open center |
Pressure: | 2500 psi [172.4 bar] |
Rear valves: | 2*Optional |
Pump flow: | 5.9 gpm [22.3 lpm] |
Total flow: | 10.3 gpm [39.0 lpm] |
Steering flow: | 4.4 gpm [16.7 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 55 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 600 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.46x3.54 inches [88 x 90 mm] |
Emissions: | Tier 4 |
Power (gross): | 34.7 hp [25.9 kW] |
Fuel system: | high pressure common rail direct injection |
Air cleaner: | dual dry element |
Compression: | 19.1:1 |
Rated RPM: | 2400 |
Starter: | electric |
Starter volts: | 12 |
Starter power: | 1.9 hp [1.4 kW] |
Oil capacity: | 4.8 qts [4.5 L] |
Oil change: | 400 h |
Coolant capacity: | 5.8 qts [5.5 L] |
Engine Detail | |
Yanmar 3TNV88C-KJPT, diesel, 3-cylinder, liquid-cooled inline, 100.2 ci [1.6 L] |
info | |
Speeds: | With 15x19.5 rear tires. Reverse speeds are 5% faster than forward. |
Transmission | |
Type: | mechanical shuttle |
Gears: | 8 forward and reverse |
Clutch: | dry disc |
Oil capacity: | 34.8 qts [32.9 L] |
Four gears in two ranges with left-hand shuttle. Tractor must be stopped, and clutch used, to shift gear, range, or shuttle. |
info | |
Series next: | John Deere 3043D |
Series back: | John Deere 3025D |
Dimensions | |
Weight (shipping): | 2811 lbs [1275 kg] |
Weight (max capacity): | 4630 lbs [2100 kg] |
Front axle load: | 1940 lbs [879 kg] |
Rear axle load: | 3527 lbs [1599 kg] |
Wheelbase: | 62 inches [157 cm] |
Length: | 111.2 inches [282 cm] |
Width: | 57.3 inches [145 cm] |
Height (steering wheel): | 59.4 inches [150 cm] |
Clearance (front axle): | 14 inches [35 cm] |
Clearance (rear axle): | 13 inches [33 cm] |
Front tread: | 41.7 inches [105 cm] |
Rear tread: | 43.3 inches [109 cm] |
John Deere 3035D Tires | |
Standard tires (ag): | Front: 7-14. Rear: 11.2-24 |
Lawn/turf front: | 27x8.5-15 |
Lawn/turf rear: | 41x14-20 |
Industrial front: | 25x8.5-14 |
Industrial rear: | 15-19.5 |
info | |
Series next: | John Deere 3043D |
Series back: | John Deere 3025D |
Loader | |
Loader type: | John Deere 300E |
Height (to pin): | 84 inches [213 cm] |
Clearance, dumped bucket: | 63 inches [160 cm] |
Dump reach: | 24 inches [60 cm] |
Dump angle: | 44 |
Clearance, level bucket: | 78 inches [198 cm] |
Reach at ground: | 54 inches [137 cm] |
Breakout force (at pin): | 1704 lbs [772 kg] |
Breakout force (at 500mm): | 1204 lbs [546 kg] |
Breakout force (bucket): | 1422 lbs [645 kg] |
Lift to full height (at pin): | 1186 lbs [537 kg] |
Lift to full height (at 500mm): | 845 lbs [383 kg] |
Lift to 1.5m (at pin): | 1294 lbs [586 kg] |
Lift to 1.5m (at 500mm): | 977 lbs [443 kg] |
Bucket width: | 61 inches [154 cm] |