John Deere 3010 Specifications - John Deere 3010 Specs

info
Series: → 4010,
Production
Manufacturer: John Deere
Type: Row-Crop tractor
Factories: Waterloo, Iowa, USA, Mexico
Total built: 44,000
Original price: $4,700 (1963 )
The John Deere 3010 was available in row-crop, row-crop utility, standard, and orchard versions.
Variants
3010: ag tractor
3010 Wheel: industrial tractor
John Deere 3010 Power
Drawbar (claimed): 52.0 hp 38.8 kW
PTO (claimed): 55.09 hp 41.1 kW
Plows: 4
Drawbar (tested): 52.77 hp 39.4 kW
PTO (tested): 59.44 hp 44.3 kW
Mechanical
Chassis: 4x2 2WD
Steering: power
Brakes: differntial hydraulic wet disc
Cab: Open operator station
Transmission: 8-speed partially synchronized
Capacity
Fuel: 29 gal 109.8 L
Hydraulic system: 9.5 gal 36.0 L
Hydraulics
Type: closed center
Capacity: 9.5 gal 36.0 L
Pressure: 2250 psi 155.1 bar
Valves: 2
Tractor hitch
Rear Type: II
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540 (1.375), 1000 (1.375)
Dimensions & Tires
Wheelbase: 90 inches 228 cm
Weight: 6,500 lbs 2948 kg
Front tire: 9.00-18
Rear tire: 16.9-24
3010 Serial Numbers
Location: Rear of transmission case
1961: 1000
1962: 19801
1963: 32400
Final: 46952
Electrical
Ground: positive (12V), floating (24V)
Gas/LP Batteries: 1
Diesel Batteries: 2
Battery volts: 12
info
Series: → 4010,
Engines overview
John Deere 3.3L 4-cyl gasoline, John Deere 3.3L 4-cyl LP gas, John Deere 4.2L 4-cyl diesel
Engine Detail
John Deere, diesel, 4-cylinder, liquid-cooled
Displacement: 254 ci 4.2 L
Bore/Stroke: 4.125x4.75 inches 105 x 121 mm
Air cleaner: oil bath
Compression: 16.4:1
Rated RPM: 2200
Starter volts: 24
info
Series: → 4010,
Transmission
Transmission: John Deere Syncro-Range
Type: partially synchronized
Gears: 8 forward and 3 reverse
Clutch: dry disc
Synchro-Range requires the tractor to be stopped and clutch depressed to select one of four shift stations. Once a station is selected the tractor can be shifted on the move between the two forward gears (and single reverse in stations 1, 2, and 3) by using the clutch.
info
Series: → 4010,
John Deere 3010 Tires
Ag front: 9.00-18, 6.00-14, 6.50-16, 7.50-16, 7.50-18
Ag rear: 16.9-24, 13.6-28, 13.6-30, 18.4-30, 12.4-36, 13.9-36
Dimensions
Wheelbase: 90 inches 228 cm
Operating weight: 6,500 lbs 2948 kg
Row-crop Front tread: 48 to 80 inches 121 to 203 cm
Standard Front tread: 52 to 66 inches 132 to 167 cm
Row-crop utility Front tread: 50 to 79 inches 127 to 200 cm
Row-crop Rear tread: 62 to 98 inches 157 to 248 cm
Standard Rear tread: 52 to 79 inches 132 to 200 cm
Row-crop utility Rear tread: 50 to 79 inches 127 to 200 cm
info
Series: → 4010,
John Deere 48 Loader
Height (to pin): 126 inches 320 cm
Clearance, dumped bucket: 104 inches 264 cm
Dump reach: 26 inches 66 cm
Dump angle: 39°
Reach at ground: 68 inches 172 cm
Breakout force (lift): 3600 lbs 1632 kg
Lift to full height (at pin): 2400 lbs 1088 kg
Bucket width: 60 inches 152 cm, 72 inches 182 cm