FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1980 - 1982 2040 Series, Utility tractor | |
| Next model: | John Deere 2950 |
| Series back: | John Deere 2640 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Mannheim, Baden-WГјrttemberg, Germany |
| Original price (USD), $25,500 (1982 ), | |
| Capacity | |
| Fuel: | 33.25 gal [125.9 L] |
| 3-Point Hitch | |
| Rear Type: | II |
| Control: | position control and lower-link draft sensing |
| Rear lift (at 24"/610mm): | 2400 lbs [1088 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Dimensions & Tires | |
| Wheelbase: | 101.6 inches [258 cm] |
| Weight: | 9435 to 10650 pounds |
| Front tire: | 10.00-16 |
| 2WD Rear tire: | 18.4-34 |
| 2940 Serial Numbers | |
| Location: | Serial number plate on the front-right of the Deere 2940 frame, above the front axle. |
| John Deere 2940 Power | |
| Drawbar (claimed): | 68 hp [50.7 kW] |
| PTO (claimed): | 82 hp [61.1 kW] |
| Drawbar (tested): | 64.18 hp [47.9 kW] |
| PTO (tested): | 81.17 hp [60.5 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Final drives: | planetary |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Open operator station. Sound-Gard Cab optional. |
| Hydraulics | |
| Type: | closed center |
| Pressure: | 2250 psi [155.1 bar] |
| Valves: | 2 |
| Pump flow: | 23 gpm [87.1 lpm] |
| Electrical | |
| Ground: | negative |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.19x4.33 inches [106 x 110 mm] |
| Compression: | 16.8:1 |
| Rated RPM: | 2500 |
| Starter volts: | 12 |
| Coolant capacity: | 20 qts [18.9 L] |
| Engine Detail | |
| John Deere, diesel, 6-cylinder, liquid-cooled, 359 ci [5.9 L] |
| info | |
| Speeds: | With 18.4-34 rear tires. |
| Transmission | |
| Transmission: | John Deere TSS High-Low |
| Type: | partial power shift |
| Gears: | 16 forward and 8 reverse |
| Four gears in two ranges, plus reverse range. Left-hand power shift between direct drive and lower range. | |
| info | |
| Next model: | John Deere 2950 |
| Series back: | John Deere 2640 |
| Dimensions | |
| Weight (operating): | 9435 lbs [4279 kg] (4WD ROPS) |
| Weight (ballasted): | 10650 lbs [4830 kg] |
| Wheelbase: | 101.6 inches [258 cm] |
| Length: | 164.9 inches [418 cm] |
| Width: | 90.3 inches [229 cm] |
| Height (hood): | 67.1 inches [170 cm] |
| Height (exhaust): | 113 inches [287 cm] |
| Clearance (front axle): | 25.6 inches [65 cm] |
| Rear axle: | Rack-and-pinion |
| Front tread: | 57 to 82.4 inches [144 to 209 cm] 63 to 94 inches (wide front) [160 to 238 cm] (wide front) |
| Rear tread: | 69 to 91 inches [175 to 231 cm] |
| John Deere 2940 Tires | |
| 2WD Standard tires (ag): | Front: 10.00-16. Rear: 18.4-34 |
| 4WD Standard tires (ag): | Front: 12.4-28. Rear: 16.9-38 |
| 4WD Optional tires (ag): | Front: 13.6-24. Rear: 18.4-34 |