FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1983 - 1986 2050 Series, Utility tractor | |
| Next model: | John Deere 2755 |
| Series next: | John Deere 2950 |
| Series back: | John Deere 2550 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Mannheim, Baden-WГјrttemberg, Germany |
| Original price (USD): | $25,000 (1986) |
| Variants | |
| 2750: | utility chassis |
| 2750 High-Clearance: | high-crop |
| 2750 Low-Profile: | orchard |
| Capacity | |
| Fuel: | 26 gal [98.4 L] |
| Hydraulic system: | 13.2 gal [50.0 L] |
| 3-Point Hitch | |
| Rear Type: | II/I |
| Control: | load and depth control |
| Rear lift: | 3,300 lbs [1496 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540, 540/1000 (optional) |
| Dimensions & Tires | |
| 2WD Wheelbase: | 89.2 inches [226 cm] |
| 4WD Wheelbase: | 90 inches [228 cm] |
| Weight: | 7500 to 9625 pounds |
| Front tire: | 7.50-16 |
| Rear tire: | 18.4-30 (2WD) |
| 2750 Serial Numbers | |
| Location: | Right side of main tractor frame, above front axle. |
| John Deere 2750 Power | |
| PTO (claimed): | 75 hp [55.9 kW] |
| Drawbar (tested): | 62.97 hp [47.0 kW] |
| PTO (tested): | 75.35 hp [56.2 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Differential lock: | rear standard |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Two-post ROPS. Canopy available. Sound-Gard cab optional with available heat and air-conditioning. |
| Hydraulics | |
| Type: | closed center |
| Capacity: | 13.2 gal [50.0 L] |
| Rear valves: | 1 or 2 |
| Pump flow: | 23 gpm [87.1 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 55 |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.19x4.33 inches [106 x 110 mm] |
| Compression: | 16.8:1 |
| Rated RPM: | 2500 |
| Starter volts: | 12 |
| Coolant capacity: | 3.4 qts [3.2 L] |
| Engine Detail | |
| John Deere, turbocharged diesel, 4-cylinder, liquid-cooled, 239 ci [3.9 L] |
| info | |
| Speeds: | With 18.4-30 rear tires. |
| Transmission | |
| Transmission: | John Deere Top-Shaft Synchronized |
| Type: | partially synchronized |
| Gears: | 8 forward and 4 reverse |
| Four gears in two ranges, plus reverse range. Synchronized shifting between gears. | |
| info | |
| Next model: | John Deere 2755 |
| Series next: | John Deere 2950 |
| Series back: | John Deere 2550 |
| Dimensions | |
| Weight (shipping): | 8,210 lbs [3724 kg] (2WD cab), 8,910 lbs [4041 kg] (4WD cab) |
| Weight (operating): | 7,500 lbs [3402 kg] (2WD ROPS) |
| Weight (ballasted): | 9,625 lbs [4365 kg] |
| 2WD Wheelbase: | 89.2 inches [226 cm] |
| 4WD Wheelbase: | 90 inches [228 cm] |
| 2WD Length: | 138.8 inches [352 cm] |
| 4WD Length: | 136.9 inches [347 cm] |
| Height (steering wheel): | 66.3 inches [168 cm] |
| Height (cab): | 102.2 inches [259 cm] |
| 2WD Clearance (front axle): | 24.8 inches [62 cm] |
| 4WD Clearance (front axle): | 18.9 inches [48 cm] |
| 2WD turn radius: | 12.5 feet [3.8 m], 11.2 feet [3.4 m] (with brakes) |
| 4WD turn radius: | 15.9 feet [4.8 m] |
| John Deere 2750 Tires | |
| Standard tires (ag): | Front: 7.50-16. Rear: 18.4-30 (2WD), Front: 13.6-24. Rear: 15.5-38 (4WD) |
| info | |
| Next model: | John Deere 2755 |
| Series next: | John Deere 2950 |
| Series back: | John Deere 2550 |
| Loader | |
| Loader type: | John Deere 245 |
| Weight: | 1544 lbs [700 kg] |
| Height (to pin): | 138 inches [350 cm] |
| Clearance, dumped bucket: | 112 inches [284 cm] |
| Dump reach: | 37 inches [93 cm] |
| Dump angle: | 42 |
| Clearance, level bucket: | 132 inches [335 cm] |
| Rollback angle: | 39 |
| Breakout force (lift): | 3546 lbs [1608 kg] |
| Lift to full height (at pin): | 2339 lbs [1060 kg] |
| Bucket width: | 61 inches [154 cm], 73 inches [185 cm], 85 inches [215 cm] |