FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2006 - 2012 2000 Twenty Series, Compact Utility tractor | |
| Series next: | John Deere 2720 |
| Series back: | John Deere 2320 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Capacity | |
| Fuel: | 7.1 gal [26.9 L] |
| Hydraulic system: | 3.85 gal [14.6 L] |
| Front axle: | 3.6 qts [3.4 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control |
| Rear lift (at ends): | 1433 lbs [650 kg] |
| Rear lift (at 24"/610mm): | 1150 lbs [521 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Mid PTO: | standard |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 65.2 inches [165 cm] |
| Weight: | 1,865 lbs [845 kg] |
| 2520 Serial Numbers | |
| Location: | On frame, right side, above front axle |
| John Deere 2520 Power | |
| Engine (gross): | 26.4 hp [19.7 kW] |
| PTO (claimed): | 20.5 hp [15.3 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Final drives: | spur gear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post folding ROPS. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 3.85 gal [14.6 L] |
| Valves: | 2 |
| Pump flow: | 5.0 gpm [18.9 lpm] |
| Total flow: | 10.5 gpm [39.7 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 20 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.23x3.31 inches [82 x 84 mm] |
| Rated Power (EC 97/98): | 26.4 hp [19.7 kW] |
| Compression: | 19.2:1 |
| Rated RPM: | 2600 |
| Torque: | 51.3 lb-ft [69.6 Nm] |
| Torque RPM: | 2600 |
| Starter volts: | 12 |
| Oil capacity: | 3.8 qts [3.6 L] |
| Coolant capacity: | 4.1 qts [3.9 L] |
| Engine Detail | |
| Yanmar 3TNV82A, diesel, 3-cylinder, liquid-cooled, 81.2 ci [1.3 L] |
| info | |
| Series next: | John Deere 2720 |
| Series back: | John Deere 2320 |
| Transmission | |
| Type: | hydrostatic |
| Gears: | infinite (2-range) forward and reverse |
| Oil capacity: | 15.6 qts [14.8 L] |
| info | |
| Series next: | John Deere 2720 |
| Series back: | John Deere 2320 |
| Dimensions | |
| Weight (operating): | 1,865 lbs [845 kg] |
| Wheelbase: | 65.2 inches [165 cm] |
| Length: | 108.9 inches [276 cm] |
| Width: | 39.2 inches [99 cm] (min), 52.6 inches [133 cm] (max) |
| Height (hood): | 47.2 inches [119 cm] |
| Height (ROPS): | 89.7 inches [227 cm], 68.9 inches [175 cm] *Folded |
| Ground clearance: | 12.5 inches [31 cm] |
| Clearance (front axle): | 13 inches [33 cm] |
| Clearance (drawbar): | 11 inches [27 cm] |
| Front tread: | 32.7 inches [83 cm] |
| Rear tread: | 37.6 inches [95 cm] |
| 4WD turn radius: | 8.2 feet [2.5 m] |
| John Deere 2520 Tires | |
| Lawn/turf front: | 24x8.5-14 |
| Lawn/turf rear: | 36x14.00-15 |
| Industrial front: | 23x8.5-12 |
| Industrial rear: | 14-17.5 |
| info | |
| Series next: | John Deere 2720 |
| Series back: | John Deere 2320 |
| 62" Mower deck | |
| Type: | mid-mount John Deere 62D2, 3-blade |
| Cutting width: | 62 inches [157 cm] |
| Weight: | 275 lbs [124 kg] |
| Overall width: | 75.3 inches [191 cm] |
| Cut height: | 1 to 6 inch [2 to 15 cm] |
| 72" Mower deck | |
| Type: | mid-mount John Deere 72, 3-blade |
| Cutting width: | 72 inches [182 cm] |
| Weight: | 406 lbs [184 kg] |
| Overall width: | 85 inches [215 cm] |
| Cut height: | 1 to 9 inch [2 to 22 cm] |
| Loader | |
| Loader type: | John Deere 200CX |
| Height (to pin): | 78.5 inches [199 cm] |
| Clearance, dumped bucket: | 72.2 inches [183 cm] |
| Dump reach: | 29.5 inches [74 cm] |
| Dump angle: | 38 |
| Rollback at ground: | 25 |
| Rollback, raised: | 105 |
| Breakout force (at pin): | 2239 lbs [1015 kg] |
| Breakout force (at 500mm): | 1515 lbs [687 kg] |
| Breakout force (bucket): | 1702 lbs [772 kg] |
| Lift to full height (at pin): | 902 lbs [409 kg] |
| Lift to full height (at 500mm): | 629 lbs [285 kg] |
| Lift to 1.5m (at pin): | 1124 lbs [509 kg] |
| Lift to 1.5m (at 500mm): | 827 lbs [375 kg] |
| Bucket width: | 53 inches [134 cm] |
| Raise time to height: | 3.19 s |
| Bucket dump time: | 3.19 s |
| Lowering time: | 1.95 s |
| Rollback time: | 1.95 s |
| Backhoe | |
| Backhoe type: | John Deere 46 |
| Weight: | 896 lbs [406 kg] |
| Transport height: | 60 inches [152 cm] |
| 2-Foot flat digging depth: | 78 inches [198 cm] |
| Reach from pivot: | 101 inches [256 cm] |
| Loading height: | 60 inches [152 cm] |
| Bucket Rotation: | 180 |
| Swing Arc: | 180 |
| Bucket force: | 2450 lbs [1111 kg] |
| Dipperstick force: | 1250 lbs [567 kg] |