John Deere 2510 Specifications - John Deere 2510 Specs

info
Deere 303
Production
Manufacturer: John Deere
Type: Row-Crop tractor
Factory: Waterloo, Iowa, USA
Total built: 14,869 (total row-crop), 8,023 (gas Syncro), 5,516 (diesel Syncro), 817 (diesel Power Shift), 513 (gas Power Shift)
The John Deere model 2510 used a 2020 engine fitted to a modified 3020 chassis. The tractor met the need for a smaller row-crop tractor, still popular in the United States in the late 1960s.
Variants
2510: row-crop
2510HC: high-crop
John Deere 2510 Power
Drawbar (tested): 46.82 hp 34.9 kW
PTO (tested): 54.9 hp 40.9 kW
Mechanical
Chassis: 4x2 2WD
Differential lock: mechanical rear
Steering: power
Brakes: hydraulic wet disc
Cab: Open operator station.
Transmissions: 8-speed partially synchronized, 8-speed full power shift
Capacity
Fuel: 26 gal 98.4 L
Hydraulic system: 11 gal 41.6 L (SyncroRange), 14 gal 53.0 L (PowerShift)
Hydraulics
Type: closed center constant pressure
Capacity: 11 gal 41.6 L (SyncroRange), 14 gal 53.0 L (PowerShift)
Pressure: 2250 psi 155.1 bar
Valves: 1 or 2
Tractor hitch
Rear Type: II/I
Control: position and lower-link draft control
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000 (1.375), 1000 (1.375)
Engine RPM: 1000@2100
Front PTO: optional
Front RPM: 1000
Dimensions & Tires
Wheelbase: 90 inches 228 cm
Weight: 6200 to 6745 pounds
Front tire: 6.00-16
Rear tire: 13.6-38
2510 Serial Numbers
Location: Serial number plate on the rear of the John Deere 2510, above the PTO shaft.
Electrical
Ground: negative
Battery
Number: 1 (gas), 2 (diesel)
Volts: 12
Amp-hours: 75
info
Series: 2510, 2520 ↓
Engines overview
John Deere 3.0L 4-cyl gasoline, John Deere 3.3L 4-cyl diesel
Engine Detail
John Deere, diesel, 4-cylinder 8-valve, liquid-cooled inline valve-in-head
Displacement: 202.68 ci 3.3 L
Bore/Stroke: 3.86x4.33 inches 98 x 110 mm
Air cleaner: oil bath
Pre-heating: ether injection, block heater (optional)
Compression: 16.3:1
Rated RPM: 2500
Idle RPM: 800-2650
Operating RPM: 1500-2500
Firing order: 1-3-4-2
Starter volts: 12
Coolant capacity: 14 qts 13.2 L
Intake valve clearance: 0.014 inches 0.356 mm
Exhaust valve clearance: 0.018 inches 0.457 mm
Engine Oil
Oil capacity: 7 qts 6.6 L
Oil change: 200 h
info
Deere 303
Transmissions overview
8-speed partially synchronized, 8-speed full power shift
Transmission
Transmission: John Deere Power Shift
Type: full power shift
Gears: 8 forward and 4 reverse
Clutch: hydraulic wet disc
Oil capacity: 56 qts 53.0 L (dry), 44 qts 41.6 L (service)
Oil change: 1200 h
info
Series: 2510, 2520 ↓
John Deere 2510 Tires
Standard tires (ag): Front: 6.00-16. Rear: 13.6-38
Dimensions
Wheelbase: 90 inches 228 cm
Length: 140 inches 355 cm
Width: 86.2 inches 218 cm
Height (steering wheel): 74.4 inches 188 cm
Front tread: 48.5 to 72.5 inches (wheels in) 123 to 184 cm (wheels in) 58.25 to 82.25 inches (wheels out) 147 to 208 cm (wheels out)
Rear tread: 56 to 88 inches 142 to 223 cm, 56 to 104 inches 142 to 264 cm (long axle)
John Deere 2510 Weight
6,245 lbs 2832 kg (gas Syncro-Range), 6,745 lbs 3059 kg (diesel Power-Shift)
Shipping: 6200 lbs 2812 kg (gas Syncro), 6350 lbs 2880 kg (diesel Syncro)
info
Series: 2510, 2520 ↓
John Deere 48 Loader
Height (to pin): 126 inches 320 cm
Clearance, dumped bucket: 104 inches 264 cm
Dump reach: 26 inches 66 cm
Dump angle: 39°
Reach at ground: 68 inches 172 cm
Breakout force (lift): 3600 lbs 1632 kg
Lift to full height (at pin): 2400 lbs 1088 kg
Bucket width: 60 inches 152 cm, 72 inches 182 cm