FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2003 - 2006, Sub-Compact Utility tractor | |
| Next model: | John Deere 2305 |
| Production | |
| Manufacturer: | John Deere |
| Factory: | Augusta, Georgia, USA |
| Capacity | |
| Fuel: | 5 gal [18.9 L] |
| Hydraulic system: | 3.4 gal [12.9 L] |
| 3-Point Hitch | |
| Rear Type: | I*Limited |
| Rear lift (at 24"/610mm): | 700 lbs [317 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | hydraulic wet disc*Mid PTO shared clutch with rear PTO. |
| Rear RPM: | 540 |
| Mid PTO: | independent |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 57 inches [144 cm] |
| Weight: | 1400 lbs [635 kg] |
| Front tire: | 18x8.50-10 |
| Rear tire: | 26x12.00-12 |
| 2210 Serial Numbers | |
| Location: | Right side of main tractor frame, above the front axle. |
| John Deere 2210 Power | |
| Engine (gross): | 23 hp [17.2 kW] |
| Engine (net): | 22.5 hp [16.8 kW] |
| PTO (claimed): | 17.7 hp [13.2 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Final drives: | spur gear |
| Differential lock: | mechanical rear |
| Steering: | power |
| Cab: | Two-post fixed ROPS. |
| Hydraulics | |
| Type: | open center |
| Capacity: | 3.4 gal [12.9 L] |
| Pressure: | 1987 psi [137.0 bar] |
| Mid valves: | 2 |
| Pump flow: | 3 gpm [11.4 lpm] |
| Total flow: | 5.5 gpm [20.8 lpm] |
| Steering flow: | 2.5 gpm [9.5 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 20 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 435 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 2.91x3.07 inches [74 x 78 mm] |
| Power (gross): | 23 hp [17.2 kW] |
| Fuel system: | indirect injection |
| Air cleaner: | dry |
| Pre-heating: | coolant heater*Optional |
| Compression: | 23.5:1 |
| Rated RPM: | 3000 |
| Starter: | electric |
| Starter volts: | 12 |
| Starter power: | 1.5 hp [1.1 kW] |
| Oil capacity: | 2.1 qts [2.0 L] |
| Coolant capacity: | 3.1 qts [2.9 L] |
| Engine Detail | |
| Yanmar 3TNE74, diesel, 3-cylinder, liquid-cooled, 61.4 ci [1.0 L] |
| info | |
| Next model: | John Deere 2305 |
| Transmission | |
| Type: | hydrostatic |
| Gears: | infinite (2-range) forward and reverse |
| Oil capacity: | 13.6 qts [12.9 L] |
| info | |
| Next model: | John Deere 2305 |
| Dimensions | |
| Weight: | 1400 lbs [635 kg] |
| Drawbar capacity: | 562 lbs [254 kg] |
| Front axle load: | 750 lbs [340 kg] |
| Rear axle load: | 2426 lbs [1100 kg] |
| Wheelbase: | 57 inches [144 cm] |
| Length: | 104 inches [264 cm] |
| Width: | 47.9 inches [121 cm] |
| Height (hood): | 41.8 inches [106 cm] |
| Height (ROPS): | 78.6 inches [199 cm] |
| Clearance (front axle): | 7.7 inches [19 cm] |
| Front tread: | 31.1 inches [78 cm] |
| Rear tread: | 35.3 inches [89 cm] |
| John Deere 2210 Tires | |
| Ag front: | 18x8.50-10 |
| Ag rear: | 26x12.00-12 |
| Lawn/turf front: | 18x8.50-10 |
| Lawn/turf rear: | 26x12.00-12 |
| Industrial front: | 18x8.50-10 |
| Industrial rear: | 26x12.00-12 |
| info | |
| Next model: | John Deere 2305 |
| 54" Mower deck | |
| Type: | mid-mount John Deere 54C, 3-blade |
| Cutting width: | 54 inches [137 cm] |
| Belt: | shaft-driven |
| 62" Mower deck | |
| Type: | mid-mount John Deere 62C, 3-blade |
| Cutting width: | 62 inches [157 cm] |
| Belt: | shaft-driven |
| Blade | |
| Type: | front-mount John Deere |
| Width: | 54 inches [137 cm] |
| Lift height: | 11 inches [27 cm] |
| Cut depth: | 3.5 inches [8 cm] |
| Weight: | 50 lbs [22 kg] |
| 46" Snow blower | |
| Type: | front-mount John Deere, single-stage |
| Clearing width: | 46 inches [116 cm] |
| Clearing height: | 12 inches [30 cm] |
| Weight: | 250 lbs [113 kg] |
| Overall width: | 47.5 inches [120 cm] |
| Loader | |
| Loader type: | John Deere 210 |
| Height (to pin): | 68.5 inches [173 cm] |
| Clearance, dumped bucket: | 50 inches [127 cm] |
| Dump reach: | 242 inches [614 cm] |
| Dump angle: | 47.2 |
| Reach at ground: | 50.2 inches [127 cm] |
| Rollback at ground: | 26.5 |
| Rollback, raised: | 98.2 |
| Breakout force (at pin): | 1577 lbs [715 kg] |
| Breakout force (at 500mm): | 1072 lbs [486 kg] |
| Breakout force (bucket): | 1650 lbs [748 kg] |
| Lift to full height (at pin): | 622 lbs [282 kg] |
| Lift to full height (at 500mm): | 437 lbs [198 kg] |
| Lift to 1.5m (at pin): | 721 lbs [327 kg] |
| Lift to 1.5m (at 500mm): | 520 lbs [235 kg] |
| Bucket width: | 49.2 inches [124 cm] |
| Raise time to height: | 3.8 s |
| Bucket dump time: | 2.4 s |
| Lowering time: | 2.0 s |
| Rollback time: | 3.4 s |