John Deere 2038R Specifications - John Deere 2038R Specs

info
2017 - 2R Series, Compact Utility tractor
Series back: John Deere 2032R
Production
Manufacturer: John Deere
Factory: Augusta, Georgia, USA
Original price (USD), $23,958 (2017 ),
Capacity
Fuel: 8.5 gal [32.2 L]
3-Point Hitch
Rear Type: I
Control: position control
Rear lift (at 24"/610mm): 1356 lbs [615 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540 (1.375)
Mid RPM: 2000
Dimensions & Tires
Wheelbase: 67.9 inches [172 cm]
Weight: 2436 lbs [1104 kg]
Front tire: 7.00-12
Rear tire: 12.4-16
John Deere 2038R Power
Engine (gross): 37.3 hp [27.8 kW]
PTO (claimed): 30.4 hp [22.7 kW]
Mechanical
Final drives: spur gear
Differential lock: mechanical rear
Steering: power
Brakes: wet disc
Cab: Two-post foldable ROPS.
Hydraulics
Type: open center
Pressure: 2500 psi [172.4 bar]
Valves: 0 to 3
Pump flow: 5.3 gpm [20.1 lpm]
Total flow: 9.3 gpm [35.2 lpm]
Steering flow: 4 gpm [15.1 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 85
Charging volts: 12
Battery
Number: 1
Cold-cranking amps: 500
Volts: 12
info
Bore/Stroke: 3.39x3.54 inches [86 x 90 mm]
Emissions: Tier IV
Power (gross): 37.3 hp [27.8 kW]
Fuel system: direct injection
Air cleaner: dual dry element
Compression: 19.1:1
Rated RPM: 2500
Starter: electric
Starter volts: 12
Starter power: 1.9 hp [1.4 kW]
Oil capacity: 4.8 qts [4.5 L]
Engine Detail
Yanmar 3TNV88C-NJT, turbocharged, 3-cylinder, liquid-cooled, 95.8 ci [1.6 L]
info
Series back: John Deere 2032R
Transmission
Type: hydrostatic
Gears: infinite forward and reverse
info
Series back: John Deere 2032R
Dimensions
Weight (shipping): 2436 lbs [1104 kg]
Front axle load: 1940 lbs [879 kg]
Rear axle load: 2400 lbs [1088 kg]
Wheelbase: 67.9 inches [172 cm]
John Deere 2038R Tires
Ag front: 7.00-12
Ag rear: 12.4-16
Lawn/turf front: 200/60R15
Lawn/turf rear: 300/70R20
Industrial front: 23x8.50-14
Industrial rear: 14-17.5
info
Series back: John Deere 2032R
60" Mower deck
Type: mid-mount John Deere
Cutting width: 60 inches [152 cm]
72" Mower deck
Type: mid-mount John Deere
Cutting width: 72 inches [182 cm]
Loader
Loader type: John Deere 220R
Height (to pin): 85 inches [215 cm]
Clearance, dumped bucket: 66 inches [167 cm]
Dump reach: 30 inches [76 cm]
Dump angle: 36
Clearance, level bucket: 79 inches [200 cm]
Reach at ground: 51 inches [129 cm]
Breakout force (at pin): 1949 lbs [884 kg]
Breakout force (at 500mm): 1360 lbs [616 kg]
Breakout force (bucket): 2138 lbs [969 kg]
Lift to full height (at pin): 1120 lbs [508 kg]
Lift to full height (at 500mm): 803 lbs [364 kg]
Lift to 1.5m (at pin): 1269 lbs [575 kg]
Lift to 1.5m (at 500mm): 979 lbs [444 kg]
Bucket width: 49 inches [124 cm], 53 inches [134 cm], 57 inches [144 cm]
Backhoe
Backhoe type: John Deere 270B