FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2013 - 2017 2R Series, Model years 2013-20162017-2017, Compact Utility tractor | |
Series back: | John Deere 2025R |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Original price (USD), $18,595 (2013 ), $19,339 (2014 ), |
Capacity | |
Fuel: | 7.1 gal [26.9 L] |
Hydraulic system: | 3.9 gal [14.8 L] |
Front axle: | 0.9 qts [0.9 L] |
3-Point Hitch | |
Rear Type: | I |
Control: | position control |
Rear lift (at ends): | 1433 lbs [650 kg] |
Rear lift (at 24"/610mm): | 1250 lbs [567 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | wet disc |
Rear RPM: | 540 |
Mid PTO: | independent |
Mid RPM: | 2100 |
Dimensions & Tires | |
Wheelbase: | 65.2 inches [165 cm] |
Weight: | 1973 lbs [894 kg] |
2032R Serial Numbers | |
Location: | Right side of tractor frame, above and behind the front axle. |
- Serial numbers unknown - |
John Deere 2032R Power | |
Engine (gross): | 31.7 hp [23.6 kW] |
Engine: | 32 hp [23.9 kW] |
PTO (claimed): | 23.5 hp [17.5 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | standard |
Steering: | power |
Brakes: | wet disc |
Cab: | Two-post foldable ROPS. |
Hydraulics | |
Type: | open center |
Capacity: | 3.9 gal [14.8 L] |
Pressure: | 2421 psi [166.9 bar] |
Mid valves: | 2 |
Pump flow: | 5.0 gpm [18.9 lpm] |
Total flow: | 10.5 gpm [39.7 lpm] |
Steering flow: | 5.5 gpm [20.8 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Charging volts: | 12 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 500 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.465x3.543 inches [88 x 90 mm] |
Power: | 32 hp [23.9 kW] |
Rated Power (EC 97/98): | 31.7 hp [23.6 kW] |
Fuel system: | direct injection |
Air cleaner: | dual stage dry |
Compression: | 19.1:1 |
Rated RPM: | 2500 |
Operating RPM: | 1000-2650 |
Starter: | electric |
Starter volts: | 12 |
Oil capacity: | 3.6 qts [3.4 L] |
Oil change: | 200 h |
Coolant capacity: | 4.2 qts [4.0 L] |
Engine Detail | |
Yanmar 3TNV88, diesel, 3-cylinder, liquid-cooled, 100 ci [1.6 L] |
info | |
Deere Hy-Gard |
Transmission | |
Type: | hydrostatic |
Gears: | infinite (2-range) forward and reverse |
Oil capacity: | 15.6 qts [14.8 L] |
info | |
Series back: | John Deere 2025R |
Dimensions | |
Weight (shipping): | 1973 lbs [894 kg] |
Drawbar capacity: | 562 lbs [254 kg] |
Front axle load: | 1940 lbs [879 kg] |
Rear axle load: | 2426 lbs [1100 kg] |
Wheelbase: | 65.2 inches [165 cm] |
Length: | 108.9 inches [276 cm] |
Width: | 47.1 inches [119 cm] (min), 55.6 inches [141 cm] |
Height (hood): | 53.3 inches [135 cm] |
Height (ROPS): | 89.7 inches [227 cm], 67.5 inches [171 cm] (folded) |
Clearance (front axle): | 13 inches [33 cm] |
Front axle: | Flange |
Front tread: | 32.7 inches [83 cm] |
John Deere 2032R Tires | |
Lawn/turf front: | 24x8.5-14 |
Lawn/turf rear: | 36x14.00-15 |
Industrial front: | 23x8.5-12 |
Industrial rear: | 14-17.5 |
info | |
Series back: | John Deere 2025R |
62" Mower deck | |
Type: | mid-mount John Deere 62D |
Cutting width: | 62 inches [157 cm] |
Weight: | 422 lbs [191 kg] |
72" Mower deck | |
Type: | mid-mount John Deere |
Cutting width: | 72 inches [182 cm] |
Weight: | 448 lbs [203 kg] |
Blade | |
Type: | front-mount John Deere |
Width: | 54 inches [137 cm] |
54" Snow blower | |
Type: | front-mount John deere, two-stage |
Clearing width: | 54 inches [137 cm] |
Loader | |
Loader type: | John Deere H130 |
Height (to pin): | 78.5 inches [199 cm] |
Dump angle: | 38 |
Rollback angle: | 25 |
Breakout force (at pin): | 2363 lbs [1071 kg] |
Lift to full height (at pin): | 1027 lbs [465 kg] |
Lift to 1.5m (at pin): | 1245 lbs [564 kg] |
Raise time to height: | 3.19 s |
Bucket dump time: | 3.19 s |
Lowering time: | 1.95 s |
Rollback time: | 1.95 s |
Backhoe | |
Backhoe type: | John Deere 46 |
2-Foot flat digging depth: | 78 inches [198 cm] |
Bucket force: | 2840 lbs [1288 kg] |