FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2013 - 2020 2R Series, Model years 2013-20162017-2020, Compact Utility tractor | |
Series next: | John Deere 2032R |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Original price (USD), $14,434 (2013 ), $15,348 (2014 ), |
Capacity | |
Fuel: | 6.1 gal [23.1 L] |
Hydraulic system: | 2.6 gal [9.8 L] |
Front axle: | 0.9 qts [0.9 L] |
3-Point Hitch | |
Rear Type: | I |
Control: | position control |
Rear lift (at ends): | 1433 lbs [650 kg] |
Rear lift (at 24"/610mm): | 1150 lbs [521 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | wet disc |
Rear RPM: | 540 |
Mid PTO: | independent |
Mid RPM: | 2000 |
Dimensions & Tires | |
Wheelbase: | 63 inches [160 cm] |
Weight: | 1660 lbs [752 kg] |
2025R Serial Numbers | |
Location: | Right side of tractor frame, above and behind the front axle. |
John Deere 2025R Power | |
Engine (gross): | 24.2 hp [18.0 kW] |
Engine: | 25 hp [18.6 kW] |
PTO (claimed): | 18 hp [13.4 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | standard |
Steering: | power |
Brakes: | wet disc |
Cab: | Two-post foldable ROPS. |
Hydraulics | |
Type: | open center |
Capacity: | 2.6 gal [9.8 L] |
Pressure: | 2421 psi [166.9 bar] |
Pump flow: | 3.4 gpm [12.9 lpm] |
Total flow: | 5.6 gpm [21.2 lpm] |
Steering flow: | 2.2 gpm [8.3 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 20 |
Charging volts: | 12 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 500 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.15x3.31 inches [80 x 84 mm] |
Power: | 25 hp [18.6 kW] |
Rated Power (EC 97/98): | 24.2 hp [18.0 kW] |
Fuel system: | indirect injection |
Air cleaner: | dual stage dry |
Compression: | 23.4:1 |
Rated RPM: | 3000 |
Starter: | electric |
Starter volts: | 12 |
Starter power: | 1.6 hp [1.2 kW] |
Oil capacity: | 3.4 qts [3.2 L] |
Oil change: | 200 h |
Coolant capacity: | 3.4 qts [3.2 L] |
Engine Detail | |
Yanmar 3TNV80, diesel, 3-cylinder, liquid-cooled, 77.3 ci [1.3 L] |
info | |
Deere Hy-Gard |
Transmission | |
Type: | hydrostatic |
Gears: | infinite (2-range) forward and reverse |
Oil capacity: | 10.4 qts [9.8 L] |
info | |
Series next: | John Deere 2032R |
Dimensions | |
Weight (shipping): | 1660 lbs [752 kg] |
Drawbar capacity: | 562 lbs [254 kg] |
Front axle load: | 1940 lbs [879 kg] |
Rear axle load: | 2426 lbs [1100 kg] |
Wheelbase: | 63 inches [160 cm] |
Length: | 109.2 inches [277 cm] |
Width: | 37 inches [93 cm] *Minimum width, 51 inches [129 cm] |
Height (hood): | 47.2 inches [119 cm] |
Height (ROPS): | 89 inches [226 cm], 66.8 inches [169 cm] (folded) |
Clearance (front axle): | 12.5 inches [31 cm] |
Rear axle: | Flange |
Front tread: | 31.1 inches [78 cm] |
John Deere 2025R Tires | |
Industrial front: | 23x8.5-12 |
Industrial rear: | 31x12-16.5 |
info | |
Series next: | John Deere 2032R |
54" Mower deck | |
Type: | mid-mount John Deere |
Cutting width: | 54 inches [137 cm] |
Weight: | 369 lbs [167 kg] |
62" Mower deck | |
Type: | mid-mount John Deere 62D |
Cutting width: | 62 inches [157 cm] |
Weight: | 422 lbs [191 kg] |
Blade | |
Type: | front-mount John Deere |
Width: | 54 inches [137 cm] |
54" Snow blower | |
Type: | front-mount John deere, two-stage |
Clearing width: | 54 inches [137 cm] |
Loader | |
Loader type: | John Deere H130 |
Height (to pin): | 78.9 inches [200 cm] |
Dump angle: | 38 |
Rollback angle: | 24.5 |
Breakout force (at pin): | 2508 lbs [1137 kg] |
Lift to full height (at pin): | 1023 lbs [464 kg] |
Lift to 1.5m (at pin): | 1247 lbs [565 kg] |
Raise time to height: | 4.73 s |
Bucket dump time: | 4.73 s |
Lowering time: | 2.88 s |
Rollback time: | 2.88 s |
Backhoe | |
Backhoe type: | John Deere 270A |