FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2011 - 2012 1R Series, Sub-Compact Utility tractor |
Production | |
Manufacturer: | John Deere |
Factory: | Augusta, Georgia, USA |
Capacity | |
Fuel: | 5.6 gal [21.2 L] |
Hydraulic system: | 3.25 gal [12.3 L] |
3-Point Hitch | |
Rear Type: | Limited I |
Control: | position control |
Rear lift (at ends): | 1433 lbs [650 kg] |
Rear lift (at 24"/610mm): | 681 lbs [308 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Engine RPM: | 2100@3200 |
Mid PTO: | independent |
Mid RPM: | 2100 |
Dimensions & Tires | |
Wheelbase: | 57.1 inches [145 cm] |
Weight: | 1444 lbs [654 kg] |
1026R Serial Numbers | |
Location: | Serial number plate on the right side of main tractor frame above the front axle. |
John Deere 1026R Power | |
Engine (gross): | 25.2 hp [18.8 kW] |
Engine (net): | 23.8 hp [17.7 kW] |
PTO (claimed): | 18 hp [13.4 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | standard |
Steering: | power |
Brakes: | disc |
Cab: | Two-post ROPS. |
Hydraulics | |
Type: | open center |
Capacity: | 3.25 gal [12.3 L] |
Pressure: | 2000 psi [137.9 bar] |
Valves: | 2 to 3 |
Total flow: | 6.3 gpm [23.8 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Battery | |
Number: | 1 |
Cold-cranking amps: | 500 |
Volts: | 12 |
info | |
Bore/Stroke: | 2.9x3.2 inches [74 x 81 mm] |
Rated Power (ECE R24): | 23.8 hp [17.7 kW] |
Rated Power (EC 97/98): | 25.2 hp [18.8 kW] |
Fuel system: | indirect injection |
Air cleaner: | dual stage dry |
Pre-heating: | glow plugs |
Compression: | 23.5:1 |
Rated RPM: | 3200 |
Operating RPM: | 1400-3370 |
Firing order: | 1-3-2 |
Starter: | electric |
Starter volts: | 12 |
Oil capacity: | 2.9 qts [2.7 L] |
Oil change: | 200 h |
Coolant capacity: | 3.9 qts [3.7 L] |
Coolant change: | 2000 h |
Engine Detail | |
Yanmar 3TNV76, diesel, 3-cylinder, liquid-cooled, 68.1 ci [1.1 L] |
info | |
JD Hy-Gard |
Transmission | |
Type: | hydrostatic |
Gears: | infinite (2-range) forward and reverse |
Oil capacity: | 13 qts [12.3 L] |
Hydrostatic transmission operated by two foot pedals, left-hand range shift lever, and cruise control. Tractor must be stopped to shift range. |
Dimensions | |
Weight (operating): | 1444 lbs [654 kg] |
Front axle load: | 1349 lbs [611 kg] |
Rear axle load: | 1576 lbs [714 kg] |
Wheelbase: | 57.1 inches [145 cm] |
Length: | 87.6 inches [222 cm], 102.6 inches [260 cm] (with hitch) |
Width: | 47.2 inches [119 cm] (R3 tires) 47.3 (R4 tires) |
Height (hood): | 41.5 inches [105 cm] |
Height (ROPS): | 78.6 inches [199 cm] |
Clearance (front axle): | 12.3 inches [31 cm] |
Rear axle: | Flanged |
Front tread: | 32.2 inches [81 cm] |
Rear tread: | 35.2 inches [89 cm] |
2WD turn radius: | 7.4 feet [2.3 m] |
John Deere 1026R Tires | |
Lawn/turf front: | 18x8.5-10 |
Lawn/turf rear: | 26x12.00-12 |
Industrial front: | 18x8.5-10 |
Industrial rear: | 26x12.00-12 |
54" Mower deck | |
Type: | mid-mount John Deere 54D AutoConnect |
Cutting width: | 54 inches [137 cm] |
60" Mower deck | |
Type: | mid-mount John Deere 60D AutoConnect |
Cutting width: | 60 inches [152 cm] |
Loader | |
Loader type: | John Deere H120 |
Weight: | 541 lbs [245 kg] |
Height (to pin): | 71.2 inches [180 cm] |
Dump reach: | 22.5 inches [57 cm] |
Dump angle: | 40.1 |
Rollback angle: | 31.2 |
Breakout force (at pin): | 1819 lbs [825 kg] |
Breakout force (at 500mm): | 1245 lbs [564 kg] |
Lift to full height (at pin): | 836 lbs [379 kg] |
Lift to full height (at 500mm): | 576 lbs [261 kg] |
Lift to 1.5m (at pin): | 955 lbs [433 kg] |
Lift to 1.5m (at 500mm): | 686 lbs [311 kg] |
Bucket width: | 49 inches [124 cm], 53 inches [134 cm], 61 inches [154 cm] |